mb/lenovo/t530: Switch to overridetree

Change-Id: I3dfa303b6aae2446fa3a1d67a6e31448277cacdb
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

2 files changed, 24 insertions, 185 deletions

diff --git a/src/mainboard/lenovo/t530/variants/w530/devicetree.cb b/src/mainboard/lenovo/t530/variants/w530/devicetree.cb
deleted file mode 100644
index be6cc7d9d0..0000000000
--- a/src/mainboard/lenovo/t530/variants/w530/devicetree.cb
+++ /dev/null
@@ -1,185 +0,0 @@
-chip northbridge/intel/sandybridge
-	# IGD Displays
-	register "gfx" = "GMA_STATIC_DISPLAYS(1)"
-
-	# Enable DisplayPort Hotplug with 6ms pulse
-	register "gpu_dp_d_hotplug" = "0x06"
-
-	# Enable Panel as LVDS and configure power delays
-	register "gpu_panel_port_select" = "0"			# LVDS
-	register "gpu_panel_power_cycle_delay" = "6"		# T7: 500ms
-	register "gpu_panel_power_up_delay" = "100"		# T1+T2: 10ms
-	register "gpu_panel_power_down_delay" = "100"		# T5+T6: 10ms
-	register "gpu_panel_power_backlight_on_delay" = "2000"	# T3: 200ms
-	register "gpu_panel_power_backlight_off_delay" = "2000"	# T4: 200ms
-	register "gpu_cpu_backlight" = "0x1155"
-	register "gpu_pch_backlight" = "0x11551155"
-
-	device cpu_cluster 0 on
-		chip cpu/intel/model_206ax
-			# Magic APIC ID to locate this chip
-			device lapic 0x0 on end
-			device lapic 0xacac off end
-
-			register "c1_acpower" = "1"	# ACPI(C1) = MWAIT(C1)
-			register "c2_acpower" = "3"	# ACPI(C2) = MWAIT(C3)
-			register "c3_acpower" = "5"	# ACPI(C3) = MWAIT(C7)
-
-			register "c1_battery" = "1"	# ACPI(C1) = MWAIT(C1)
-			register "c2_battery" = "3"	# ACPI(C2) = MWAIT(C3)
-			register "c3_battery" = "5"	# ACPI(C3) = MWAIT(C7)
-		end
-	end
-
-	register "pci_mmio_size" = "2048"
-
-	device domain 0 on
-		subsystemid 0x17aa 0x21f6 inherit
-
-		device pci 00.0 on end # Host bridge
-		device pci 01.0 on end # PCIe bridge for discrete graphics
-		device pci 02.0 on # Internal graphics VGA controller
-			subsystemid 0x17aa 0x21f5
-		end
-
-		chip southbridge/intel/bd82x6x # Intel Series 6 Panther Point PCH
-			# GPI routing
-			#  0 No effect (default)
-			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
-			#  2 SCI (if corresponding GPIO_EN bit is also set)
-			register "alt_gp_smi_en" = "0x0000"
-			register "gpi1_routing" = "2"
-			register "gpi13_routing" = "2"
-
-			register "sata_port_map" = "0x3f"
-			# Set max SATA speed to 6.0 Gb/s
-			register "sata_interface_speed_support" = "0x3"
-
-			register "gen1_dec" = "0x7c1601"
-			register "gen2_dec" = "0x0c15e1"
-			register "gen4_dec" = "0x0c06a1"
-
-			# Enable zero-based linear PCIe root port functions
-			register "pcie_port_coalesce" = "1"
-			register "c2_latency" = "101"  # c2 not supported
-
-			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
-
-			register "xhci_switchable_ports" = "0xf"
-			register "superspeed_capable_ports" = "0xf"
-			register "xhci_overcurrent_mapping" = "0x04000201"
-
-			register "docking_supported" = "1"
-
-			register "spi_uvscc" = "0x2005"
-			register "spi_lvscc" = "0x2005"
-
-			device pci 14.0 on end # USB 3.0 Controller
-			device pci 16.0 on end # Management Engine Interface 1
-			device pci 16.1 off end # Management Engine Interface 2
-			device pci 16.2 off end # Management Engine IDE-R
-			device pci 16.3 on end # Management Engine KT
-			device pci 19.0 on # Intel Gigabit Ethernet
-				subsystemid 0x17aa 0x21f3
-			end
-			device pci 1a.0 on end # USB2 EHCI #2
-			device pci 1b.0 on end # High Definition Audio
-			device pci 1c.0 on # PCIe Port #1
-				chip drivers/ricoh/rce822 # Ricoh cardreader
-					register "disable_mask" = "0x83"
-					register "sdwppol" = "1"
-					device pci 00.0 on end # Ricoh SD card reader
-				end
-			end
-			device pci 1c.1 on end # PCIe Port #2
-			device pci 1c.2 on # PCIe Port #3
-				smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
-			end
-			device pci 1c.3 off end # PCIe Port #4
-			device pci 1c.4 off end # PCIe Port #5
-			device pci 1c.5 off end # PCIe Port #6
-			device pci 1c.6 off end # PCIe Port #7
-			device pci 1c.7 off end # PCIe Port #8
-			device pci 1d.0 on end # USB2 EHCI #1
-			device pci 1e.0 off end # PCI bridge
-			device pci 1f.0 on # PCI-LPC bridge
-				chip ec/lenovo/pmh7
-					device pnp ff.1 on end # dummy
-					register "backlight_enable" = "0x01"
-					register "dock_event_enable" = "0x01"
-				end
-
-				chip drivers/pc80/tpm
-					device pnp 0c31.0 on end
-				end
-
-				chip ec/lenovo/h8
-					device pnp ff.2 on # dummy
-						io 0x60 = 0x62
-						io 0x62 = 0x66
-						io 0x64 = 0x1600
-						io 0x66 = 0x1604
-					end
-
-					register "config0" = "0xa7"
-					register "config1" = "0x01"
-					register "config2" = "0xa0"
-					register "config3" = "0xe2"
-
-					register "has_keyboard_backlight" = "1"
-
-					register "beepmask0" = "0x00"
-					register "beepmask1" = "0x86"
-					register "has_power_management_beeps" = "0"
-					register "event2_enable" = "0xff"
-					register "event3_enable" = "0xff"
-					register "event4_enable" = "0xd0"
-					register "event5_enable" = "0xfc"
-					register "event6_enable" = "0x00"
-					register "event7_enable" = "0x01"
-					register "event8_enable" = "0x7b"
-					register "event9_enable" = "0xff"
-					register "eventa_enable" = "0x01"
-					register "eventb_enable" = "0x00"
-					register "eventc_enable" = "0xff"
-					register "eventd_enable" = "0xff"
-					register "evente_enable" = "0x0d"
-
-					register "has_bdc_detection" = "1"
-					register "bdc_gpio_num" = "54"
-					register "bdc_gpio_lvl" = "0"
-				end
-				chip drivers/lenovo/hybrid_graphics
-					device pnp ff.f on end # dummy
-
-					register "detect_gpio" = "21"
-
-					register "has_panel_hybrid_gpio" = "1"
-					register "panel_hybrid_gpio" = "52"
-					register "panel_integrated_lvl" = "1"
-
-					register "has_backlight_gpio" = "0"
-					register "has_dgpu_power_gpio" = "0"
-
-					register "has_thinker1" = "1"
-				end
-			end
-			device pci 1f.2 on end # SATA Controller 1
-			device pci 1f.3 on # SMBus
-				# eeprom, 8 virtual devices, same chip
-				chip drivers/i2c/at24rf08c
-					device i2c 54 on end
-					device i2c 55 on end
-					device i2c 56 on end
-					device i2c 57 on end
-					device i2c 5c on end
-					device i2c 5d on end
-					device i2c 5e on end
-					device i2c 5f on end
-				end
-			end
-			device pci 1f.5 off end # SATA Controller 2
-			device pci 1f.6 off end # Thermal
-		end
-	end
-end
diff --git a/src/mainboard/lenovo/t530/variants/w530/overridetree.cb b/src/mainboard/lenovo/t530/variants/w530/overridetree.cb
new file mode 100644
index 0000000000..fc5b31e04b
--- /dev/null
+++ b/src/mainboard/lenovo/t530/variants/w530/overridetree.cb
@@ -0,0 +1,24 @@
+chip northbridge/intel/sandybridge
+	device domain 0 on
+		device pci 02.0 on # Internal graphics VGA controller
+			subsystemid 0x17aa 0x21f5
+		end
+		chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH
+			device pci 16.3 on end # Management Engine KT
+			device pci 1c.0 on # PCIe Port #1
+				chip drivers/ricoh/rce822 # Ricoh cardreader
+					register "disable_mask" = "0x83"
+					register "sdwppol" = "1"
+					device pci 00.0 on end # Ricoh SD card reader
+				end
+			end
+			device pci 1f.0 on # PCI-LPC bridge
+				chip ec/lenovo/h8
+					register "config1" = "0x01"
+					register "config3" = "0xe2"
+				end
+			end
+			device pci 1f.6 off end # Thermal
+		end
+	end
+end