diff options
author | Stefan Reinauer <stepan@openbios.org> | 2005-12-03 23:48:17 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2005-12-03 23:48:17 +0000 |
commit | bbbfd9d1906cb2d99385eae845a13a311f77ef78 (patch) | |
tree | 0485f8ebc4bdd026e0e43bdaa36a0ac0c4fd5c6a /src/mainboard/intel/xe7501devkit/auto.c | |
parent | bd25fe979bee6a2912b671b7f811192c51c5f95f (diff) |
smaller fixups here and there, allowing some motherboards to compile or
to fail later than before.
dos2unix'ed the xe7501devkit files, that might have caused some problems
before.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/intel/xe7501devkit/auto.c')
-rw-r--r-- | src/mainboard/intel/xe7501devkit/auto.c | 184 |
1 files changed, 92 insertions, 92 deletions
diff --git a/src/mainboard/intel/xe7501devkit/auto.c b/src/mainboard/intel/xe7501devkit/auto.c index 8c635720af..1bd83a3187 100644 --- a/src/mainboard/intel/xe7501devkit/auto.c +++ b/src/mainboard/intel/xe7501devkit/auto.c @@ -1,92 +1,92 @@ -#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c"
-#include "northbridge/intel/e7501/raminit.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/debug.c"
-#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SUPERIO_PORT 0x2e
-#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1)
-
-static void hard_reset(void)
-{
- outb(0x0e, 0x0cf9);
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/e7501/raminit.c"
-#include "northbridge/intel/e7501/reset_test.c"
-#include "sdram/generic_sdram.c"
-
-
-// This function MUST appear last (ROMCC limitation)
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .d0f1 = PCI_DEV(0, 0, 1),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
- .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
- },
- };
-
- if (bist == 0)
- {
- // Skip this if there was a built in self test failure
-
- early_mtrr_init();
- enable_lapic();
- }
-
- // Get the serial port running and print a welcome banner
-
- lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- // Halt if there was a built in self test failure
- report_bist_failure(bist);
-
-// print_pci_devices();
-
- // If this is a warm boot, some initialization can be skipped
-
- if (!bios_reset_detected())
- {
- enable_smbus();
-// dump_spd_registers(&memctrl[0]);
-// dump_smbus_registers();
-
-// memreset_setup(); No-op for this chipset
- sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl);
- }
-
- // NOTE: ROMCC dies with an internal compiler error
- // if the following line is removed.
- print_debug("SDRAM is up.\r\n");
-}
+#define ASSEMBLY 1 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c" +#include "northbridge/intel/e7501/raminit.h" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/intel/e7501/debug.c" +#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" + +#define SUPERIO_PORT 0x2e +#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1) + +static void hard_reset(void) +{ + outb(0x0e, 0x0cf9); +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/e7501/raminit.c" +#include "northbridge/intel/e7501/reset_test.c" +#include "sdram/generic_sdram.c" + + +// This function MUST appear last (ROMCC limitation) +static void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + { + .d0 = PCI_DEV(0, 0, 0), + .d0f1 = PCI_DEV(0, 0, 1), + .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 }, + .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, + }, + }; + + if (bist == 0) + { + // Skip this if there was a built in self test failure + + early_mtrr_init(); + enable_lapic(); + } + + // Get the serial port running and print a welcome banner + + lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + // Halt if there was a built in self test failure + report_bist_failure(bist); + +// print_pci_devices(); + + // If this is a warm boot, some initialization can be skipped + + if (!bios_reset_detected()) + { + enable_smbus(); +// dump_spd_registers(&memctrl[0]); +// dump_smbus_registers(); + +// memreset_setup(); No-op for this chipset + sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl); + } + + // NOTE: ROMCC dies with an internal compiler error + // if the following line is removed. + print_debug("SDRAM is up.\r\n"); +} |