Provide support for setting up the framebuffer from EDID

Add three functions to edid.c:

void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr)
takes an edid and uintptr_t, and fills in a static lb_framebuffer struct
as well as setting the static vbe_valid to 1 unless some problem
is found in the edid. The intent here is that this could be called from
the native graphics setup code on both ARM and x86.

int vbe_mode_info_valid(void)
returns value of the static vbe_valid.

void fill_lb_framebuffer(struct lb_framebuffer *framebuffer)
copies the static edid_fb to lb_framebuffer.

There is now a common vbe.h in src/include, removed the two special ones.

In general, graphics in coreboot is a mess, but graphics is always a
mess.  We don't have a clean way to try two different ways to turn on
a device and use the one that works. One battle at a time. Overall,
things are much better.

The best part: this code would also work for ARM, which also uses EDID.

Change-Id: Id23eb61498b331d44ab064b8fb4cb10f07cff7f3
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3636
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 84 insertions, 30 deletions

diff --git a/src/mainboard/intel/wtm2/i915.c b/src/mainboard/intel/wtm2/i915.c
index 8103016c51..9d0c27d850 100644
--- a/src/mainboard/intel/wtm2/i915.c
+++ b/src/mainboard/intel/wtm2/i915.c
@@ -139,42 +139,96 @@ static unsigned long globalmicroseconds(void)
 
 static int i915_init_done = 0;
 
-int vbe_mode_info_valid(void)
+/* fill the palette. This runs when the P opcode is hit. */
+static void palette(void)
 {
-	return i915_init_done;
+	int i;
+	unsigned long color = 0;
+
+	for(i = 0; i < 256; i++, color += 0x010101){
+		io_i915_WRITE32(color, _LGC_PALETTE_A + (i<<2));
+	}
 }
 
-void fill_lb_framebuffer(struct lb_framebuffer *framebuffer)
-{
-	printk(BIOS_SPEW, "fill_lb_framebuffer: graphics is %p\n",
-	       (void *)graphics);
-	/* Please note: these will be filled from EDID.
-	 * these values are a placeholder.
-	 */
-	framebuffer->physical_address = graphics;
-	/* these are a fantasy, but will be fixed once we're getting
-	 * info from the hardware. Hard to get from the device tree,
-	 * which is arguably a defect of the device tree. Bear with me,
-	 * this Will Get Fixed.
-	 */
-	framebuffer->x_resolution = 1960;
-	framebuffer->y_resolution = 1700;
-	framebuffer->bytes_per_line = 1960*4;
-	framebuffer->bits_per_pixel = 32;
-	framebuffer->red_mask_pos = 16;
-	framebuffer->red_mask_size = 8;
-	framebuffer->green_mask_pos = 8;
-	framebuffer->green_mask_size = 8;
-	framebuffer->blue_mask_pos = 0;
-	framebuffer->blue_mask_size = 8;
-	framebuffer->reserved_mask_pos = 0;
-	framebuffer->reserved_mask_size = 0;
+static unsigned long times[4096];
 
+static int run(int index)
+{
+	int i, prev = 0;
+	struct iodef *id, *lastidread = 0;
+	unsigned long u, t;
+	if (index >= niodefs)
+		return index;
+	/* state machine! */
+	for(i = index, id = &iodefs[i]; id->op; i++, id++){
+		switch(id->op){
+		case M:
+			if (verbose & vmsg) printk(BIOS_SPEW, "%ld: %s\n",
+						   globalmicroseconds(), id->msg);
+			break;
+		case P:
+			palette();
+			break;
+		case R:
+			u = READ32(id->addr);
+			if (verbose & vio)
+				printk(BIOS_SPEW, "\texpect %08lx\n", id->data);
+			/* we're looking for something. */
+			if (lastidread->addr == id->addr){
+				/* they're going to be polling.
+				 * just do it 1000 times
+				 */
+				for(t = 0; t < 1000 && id->data != u; t++){
+					u = READ32(id->addr);
+				}
+				if (verbose & vspin) printk(BIOS_SPEW,
+							    "%s: # loops %ld got %08lx want %08lx\n",
+							    regname(id->addr),
+							    t, u, id->data);
+			}
+			lastidread = id;
+			break;
+		case W:
+			WRITE32(id->data, id->addr);
+			if (id->addr == PCH_PP_CONTROL){
+				if (verbose & vio)
+					printk(BIOS_SPEW, "PCH_PP_CONTROL\n");
+				switch(id->data & 0xf){
+				case 8: break;
+				case 7: break;
+				default: udelay(100000);
+					if (verbose & vio)
+						printk(BIOS_SPEW, "U %d\n", 100000);
+				}
+			}
+			break;
+		case V:
+			if (id->count < 8){
+				prev = verbose;
+				verbose = id->count;
+			} else {
+				verbose = prev;
+			}
+			printk(BIOS_SPEW, "Change verbosity to %d\n", verbose);
+			break;
+		case I:
+			printk(BIOS_SPEW, "run: return %d\n", i+1);
+			return i+1;
+			break;
+		default:
+			printk(BIOS_SPEW, "BAD TABLE, opcode %d @ %d\n", id->op, i);
+			return -1;
+		}
+		if (id->udelay)
+			udelay(id->udelay);
+		if (i < ARRAY_SIZE(times))
+			times[i] = globalmicroseconds();
+	}
+	printk(BIOS_SPEW, "run: return %d\n", i);
+	return i+1;
 }
 
-int i915lightup(unsigned int physbase,
-		unsigned int iobase,
-		unsigned int mmio,
+int i915lightup(unsigned int physbase, unsigned int iobase, unsigned int mmio,
 		unsigned int gfx);
 
 int i915lightup(unsigned int pphysbase, unsigned int piobase,