diff options
| author | Michael Niewöhner <foss@mniewoehner.de> | 2020-12-21 03:46:58 +0100 |
|---|---|---|
| committer | Michael Niewöhner <foss@mniewoehner.de> | 2021-01-21 18:49:21 +0000 |
| commit | 9c27dc8d5683f8a09f10e249cbd577058f1da15c (patch) | |
| tree | 0332912eee0ef20ede7f45d6c00c3f83a0113f23 /src/mainboard/intel/glkrvp/variants/baseboard | |
| parent | bb9dda4a7a33ab5b75b66ea5d33c2329a90dff81 (diff) | |
mb/intel/glkrvp: do UART pad configuration at board-level
UART pad configuration should not be done in common code, because that
may cause short circuits, when the user sets a wrong UART index. Thus,
add the corresponding pads to the early UART gpio table for the board as
a first step. Common UART pad config code then gets dropped in CB:48829.
Also switch to `bootblock_mainboard_early_init` to configure the pads in
early bootblock before console initialization, to make the console work
as early as possible. The board does not do any other gpio configuration
in bootblock, so this should not influence behaviour in a negative way
(e.g. breaking overrides).
Change-Id: I80369ab70d5510cb4f388f3029119e7148361af4
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49435
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/intel/glkrvp/variants/baseboard')
| -rw-r--r-- | src/mainboard/intel/glkrvp/variants/baseboard/gpio.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c b/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c index 28efde9bdb..9a8188ba5d 100644 --- a/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c +++ b/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c @@ -237,6 +237,8 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_177, UP_20K, DEEP, NF1), /* SMB_CLK */ PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_178, UP_20K, DEEP, NF1), /* SMB_DATA */ PAD_NC(GPIO_154, NONE), /* LPC_CLKRUNB -- NC for eSPI */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* LPSS_UART2_RXD */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD),/* LPSS_UART2_TXD */ }; const struct pad_config * __weak |