AGESA: Add agesawrapper_post_device()

NOTE: The procedure is moved across a collected timestamp
TS_WRITE_TABLES, so the delay of SPI erase/write will be accounted
for in an earlier entry in cbmem -t output.

Change-Id: I0f082e7af1769c8d7d03cdd51fdb5dacbf3402b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6132
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

1 files changed, 0 insertions, 35 deletions

diff --git a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c
index 79a5380f20..34afc171cc 100644
--- a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c
+++ b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c
@@ -49,13 +49,9 @@ u32 sbdn_hudson;
 
 static u32 get_bus_conf_done = 0;
 
-#if CONFIG_HAVE_ACPI_RESUME
-extern u8 acpi_slp_type;
-#endif
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	u32 status;
 
 	device_t dev;
 	int i, j;
@@ -65,37 +61,6 @@ void get_bus_conf(void)
 
 	get_bus_conf_done = 1;
 
-	/*
-	 * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
-	 * but functionally within the coreboot model, this is the best place to make the
-	 * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
-	 * after the decision about S3 resume is made, and before the system tables are
-	 * written into RAM.  The routine that is responsible for writing the tables is
-	 * "write_tables", called near the end of "main".  There is no platform
-	 * specific entry point between the S3 resume decision point and the call to
-	 * "write_tables", and the next platform specific entry points are the calls to
-	 * the ACPI table write functions.  The first of ose would seem to be the right
-	 * place, but other table write functions, e.g. the PIRQ table write function, are
-	 * called before the ACPI tables are written.  This routine is called at the beginning
-	 * of each of the write functions called prior to the ACPI write functions, so this
-	 * becomes the best place for this call.
-	 */
-#if CONFIG_HAVE_ACPI_RESUME
-	if (acpi_slp_type != 3) {
-		status = agesawrapper_amdinitlate();
-		if(status) {
-			printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
-		}
-		status = agesawrapper_amdS3Save();
-		if (status) {
-			printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status);
-		}
-	}
-#else
-	status = agesawrapper_amdinitlate();
-	if (status)
-		printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
-#endif
 
 	sbdn_hudson = 0;