diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-24 00:04:22 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-31 03:41:11 +0000 |
commit | 1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch) | |
tree | bf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard/hp/dl145_g1/romstage.c | |
parent | f054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff) |
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/hp/dl145_g1/romstage.c')
-rw-r--r-- | src/mainboard/hp/dl145_g1/romstage.c | 193 |
1 files changed, 0 insertions, 193 deletions
diff --git a/src/mainboard/hp/dl145_g1/romstage.c b/src/mainboard/hp/dl145_g1/romstage.c deleted file mode 100644 index e991dc6bda..0000000000 --- a/src/mainboard/hp/dl145_g1/romstage.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <delay.h> -#include <northbridge/amd/amdk8/amdk8.h> -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -unsigned get_sbdn(unsigned bus); - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines. */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 17); - } -} - -void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } -} - -#define SMBUS_HUB 0x18 - -void activate_spd_rom(const struct mem_controller *ctrl) -{ - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS = 1 and ABRT_STS = 1, so try another time*/ - i = 2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret != 0) && (i-->0)); - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - -static inline void change_i2c_mux(unsigned device) -{ - int ret, i; - printk(BIOS_DEBUG, "change_i2c_mux i=%02x\n", device); - i = 2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - printk(BIOS_DEBUG, "change_i2c_mux 1 ret=%08x\n", ret); - } while ((ret != 0) && (i-->0)); - ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); - printk(BIOS_DEBUG, "change_i2c_mux 2 ret=%08x\n", ret); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/amd/amd8111/early_ctrl.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "resourcemap.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#if IS_ENABLED(CONFIG_SET_FIDVID) -#include "cpu/amd/model_fxx/fidvid.c" -#endif - -#define RC0 ((1 << 1)<<8) -#define RC1 ((1 << 2)<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - //first node - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC1|DIMM0, RC1|DIMM2, 0, 0, - RC1|DIMM1, RC1|DIMM3, 0, 0, -#endif - }; - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx,sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_dl145g1_resource_map(); - - setup_coherent_ht_domain(); - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - ht_setup_chains_x(sysinfo); -#if IS_ENABLED(CONFIG_SET_FIDVID) - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - struct cpuid_result cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - { - /* Read FIDVID_STATUS */ - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } -#endif - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - enable_smbus(); - - int i; - for (i = 0; i < 2; i++) - activate_spd_rom(&sysinfo->ctrl[i]); - for (i = RC0; i <= RC1; i <<= 1) - change_i2c_mux(i); - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - memreset_setup(); -#if IS_ENABLED(CONFIG_SET_FIDVID) - init_timer(); // Need to use TMICT to synchronize FID/VID -#endif - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} |