Copy asrock/ibm-a180 to hp/abm

Change-Id: I8dcb3912976d7381421dc41ee30e7c7652e6c28a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6115
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>

1 files changed, 337 insertions, 0 deletions

diff --git a/src/mainboard/hp/abm/BiosCallOuts.c b/src/mainboard/hp/abm/BiosCallOuts.c
new file mode 100644
index 0000000000..53b687159b
--- /dev/null
+++ b/src/mainboard/hp/abm/BiosCallOuts.c
@@ -0,0 +1,337 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/azalia.h>
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#include <stdlib.h>
+
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+	{AGESA_ALLOCATE_BUFFER,          agesa_AllocateBuffer },
+	{AGESA_DEALLOCATE_BUFFER,        agesa_DeallocateBuffer },
+	{AGESA_LOCATE_BUFFER,            agesa_LocateBuffer },
+	{AGESA_DO_RESET,                 agesa_Reset },
+	{AGESA_READ_SPD,                 agesa_ReadSpd },
+	{AGESA_READ_SPD_RECOVERY,        agesa_NoopUnsupported },
+	{AGESA_RUNFUNC_ONAP,             agesa_RunFuncOnAp },
+	{AGESA_GET_IDS_INIT_DATA,        agesa_EmptyIdsInitData },
+	{AGESA_HOOKBEFORE_DQS_TRAINING,  agesa_NoopSuccess },
+	{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+	{AGESA_FCH_OEM_CALLOUT,          Fch_Oem_config },
+	{AGESA_GNB_GFX_GET_VBIOS_IMAGE,  agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * CODEC Initialization Table for Azalia HD Audio using Realtek ALC662 chip
+ */
+static const CODEC_ENTRY Alc662_VerbTbl[] =
+{
+	{ 0x14, /*01014010*/                /* Port D - green headphone jack    */
+			(AZALIA_PINCFG_PORT_JACK << 30)
+			| ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24)
+			| (AZALIA_PINCFG_DEVICE_LINEOUT << 20)
+			| (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+			| (AZALIA_PINCFG_COLOR_GREEN << 12)
+			| (1 << 4)
+			| (0 << 0)
+	},
+	{ 0x15, /*0x90170120*/              /* Port A - white speaker header    */
+			(AZALIA_PINCFG_PORT_FIXED << 30)
+			| (AZALIA_PINCFG_LOCATION_INTERNAL << 24)
+			| (AZALIA_PINCFG_DEVICE_SPEAKER << 20)
+			| (AZALIA_PINCFG_CONN_OTHER_ANALOG << 16)
+			| (AZALIA_PINCFG_COLOR_WHITE << 12)
+			| (AZALIA_PINCFG_MISC_IGNORE_PRESENCE << 8)
+			| (2 << 4)
+			| (0 << 0)
+	},
+	{ 0x16, 0x411111F0 },               /* Port G - not connected           */
+	{ 0x18, /*0x01A19040*/              /* Port B - pink headphone jack     */
+			(AZALIA_PINCFG_PORT_JACK << 30)
+			| ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24)
+			| (AZALIA_PINCFG_DEVICE_MICROPHONE << 20)
+			| (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+			| (AZALIA_PINCFG_COLOR_PINK << 12)
+			| (4 << 4)
+			| (0 << 0)
+	},
+	{ 0x19, /*0x02A19050*/              /* Port F - front panel header mic  */
+			(AZALIA_PINCFG_PORT_NC << 30)
+			| ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24)
+			| (AZALIA_PINCFG_DEVICE_MICROPHONE << 20)
+			| (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+			| (AZALIA_PINCFG_COLOR_PINK << 12)
+			| (5 << 4)
+			| (0 << 0)
+	},
+	{ 0x1A, /*0x0181304F*/              /* Port C - NL blue headphone jack  */
+			(AZALIA_PINCFG_PORT_NC << 30)
+			| ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24)
+			| (AZALIA_PINCFG_DEVICE_LINEIN << 20)
+			| (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+			| (AZALIA_PINCFG_COLOR_BLUE << 12)
+			| (4 << 4)
+			| (0xF << 0)
+	},
+	{ 0x1B, /*0x02214030*/              /* Port E - front panel line-out     */
+			(AZALIA_PINCFG_PORT_NC << 30)
+			| ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24)
+			| (AZALIA_PINCFG_DEVICE_HP_OUT << 20)
+			| (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+			| (AZALIA_PINCFG_COLOR_GREEN << 12)
+			| (3 << 4)
+			| (0 << 0)
+	},
+	{ 0x1C, 0x411111F0 },               /* CD-in - Not Connected            */
+	{ 0x1D, 0x411111F0 },               /* PC Beep - Not Connected          */
+	{ 0x1E, 0x411111F0 },               /* S/PDIF - Not connected           */
+	{ 0xFF, 0xFFFFFFFF },
+};
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+	{0x10ec0662, (CODEC_ENTRY*)Alc662_VerbTbl},
+	{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE	0
+#define FAN_INPUT_TEMP0			1
+#define FAN_INPUT_TEMP1			2
+#define FAN_INPUT_TEMP2			3
+#define FAN_INPUT_TEMP3			4
+#define FAN_INPUT_TEMP0_FILTER		5
+#define FAN_INPUT_ZERO			6
+#define FAN_INPUT_DISABLED		7
+
+#define FAN_AUTOMODE			(1 << 0)
+#define FAN_LINEARMODE			(1 << 1)
+#define FAN_STEPMODE			~(1 << 1)
+#define FAN_POLARITY_HIGH		(1 << 2)
+#define FAN_POLARITY_LOW		~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ			0x0
+#define FREQ_25KHZ			0x1
+#define FREQ_23KHZ			0x2
+#define FREQ_21KHZ			0x3
+#define FREQ_29KHZ			0x4
+#define FREQ_18KHZ			0x5
+#define FREQ_100HZ			0xF7
+#define FREQ_87HZ			0xF8
+#define FREQ_58HZ			0xF9
+#define FREQ_44HZ			0xFA
+#define FREQ_35HZ			0xFB
+#define FREQ_29HZ			0xFC
+#define FREQ_22HZ			0xFD
+#define FREQ_14HZ			0xFE
+#define FREQ_11HZ			0xFF
+
+/* imb_a180 Hardware Monitor Fan Control
+ * Hardware limitation:
+ *  HWM failed to read the input temperture vi I2C,
+ *  if other software switch the I2C switch by mistake or intention.
+ *  We recommend to using IMC to control Fans, instead of HWM.
+ */
+#if 0
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+	FCH_HWM_FAN_CTR oem_factl[5] = {
+		/* temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
+		/* imb_a180 FanOUT0 Fan header J32 */
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		/* imb_a180 FanOUT1 Fan header J31*/
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+	};
+	LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
+
+	/* Enable IMC fan control. the recommand way */
+#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
+	/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+	FchParams->Hwm.HwMonitorEnable = TRUE;
+	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+
+	FchParams->Imc.ImcEnable = TRUE;
+	FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
+	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+	LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+	/* Thermal Zone Parameter */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
+
+	/* IMC Fan Policy temperature thresholds */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80;	/*AC0 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0;	/*AC1 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0;	/*AC2 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+	/* IMC Fan Policy PWM Settings */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0;	/* AL0 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0;	/* AL1 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0;	/* AL2 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00;	/* AL3 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00;	/* AL4 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00;	/* AL5 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00;	/* AL6 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00;	/* AL7 percentage */
+
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;	/* zone */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;	/*AC0 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;	/*AC1 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;	/*AC2 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;	/*Zone */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;	/* AL0 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;	/* AL1 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;	/* AL2 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;	/* AL3 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;	/* AL4 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;	/* AL5 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;	/* AL6 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;	/* AL7 percentage */
+
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+
+	/* IMC Function */
+	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+
+	/* NOTE:
+	 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+	 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+	 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+	 */
+
+#else /* HWM fan control, the way not recommand */
+	FchParams->Imc.ImcEnable = FALSE;
+	FchParams->Hwm.HwMonitorEnable = TRUE;
+	FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+#endif
+
+/**
+ * Fch Oem setting callback
+ *
+ *  Configure platform specific Hudson device,
+ *   such Azalia, SATA, IMC etc.
+ */
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+	AMD_CONFIG_PARAMS *StdHeader = ConfigPtr;
+
+	if (StdHeader->Func == AMD_INIT_RESET) {
+		FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+		//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+		FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+		FchParams_reset->FchReset.Xhci1Enable = FALSE;
+	} else if (StdHeader->Func == AMD_INIT_ENV) {
+		FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+		/* Azalia Controller OEM Codec Table Pointer */
+		FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList;
+		/* Azalia Controller Front Panel OEM Table Pointer */
+
+		/* Fan Control */
+		//oem_fan_control(FchParams_env);
+
+		/* XHCI configuration */
+		FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+		FchParams_env->Usb.Xhci1Enable = FALSE;
+
+		/* sata configuration */
+	}
+	printk(BIOS_DEBUG, "Done\n");
+
+	return AGESA_SUCCESS;
+}