diff options
| author | Morris Hsu <morris-hsu@quanta.corp-partner.google.com> | 2023-10-18 15:45:18 +0800 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2023-10-23 13:01:01 +0000 |
| commit | 0360aea50062cbf0a7c3d42f2f6e6f7a7672ebf9 (patch) | |
| tree | d30ba9c50869489b92f2a1a11f7a50d9a2a7fb8c /src/mainboard/google | |
| parent | a0efce412d2145d5db68cce104c90035a1b9f196 (diff) | |
mb/google/brya/var/dochi: Update overridetree for FingerPrint
Update overridetree to correct FP_MCU fw_config settings.
BUG=b:299284564, b:298328847, b:299570339
TEST=emerge-brya coreboot
Change-Id: If76dd8fa3567ed01b11a6d2ba796e8c39807816c
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78454
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google')
| -rw-r--r-- | src/mainboard/google/brya/variants/dochi/fw_config.c | 13 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/dochi/overridetree.cb | 8 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/dochi/variant.c | 2 |
3 files changed, 11 insertions, 12 deletions
diff --git a/src/mainboard/google/brya/variants/dochi/fw_config.c b/src/mainboard/google/brya/variants/dochi/fw_config.c index d2947074ac..59013d0126 100644 --- a/src/mainboard/google/brya/variants/dochi/fw_config.c +++ b/src/mainboard/google/brya/variants/dochi/fw_config.c @@ -1,9 +1,9 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#include <bootstate.h> +#include <baseboard/gpio.h> +#include <baseboard/variants.h> #include <console/console.h> #include <fw_config.h> -#include <gpio.h> static const struct pad_config fp_disable_pads[] = { PAD_NC(GPP_D0, NONE), /* D0 : ISH_GP0 ==> PCH_FP_BOOT0 */ @@ -11,11 +11,10 @@ static const struct pad_config fp_disable_pads[] = { PAD_NC(GPP_D2, NONE), /* D2 : ISH_GP2 ==> EN_FP_PWR */ }; -static void fw_config_handle(void *unused) +void fw_config_gpio_padbased_override(struct pad_config *padbased_table) { - if (fw_config_probe(FW_CONFIG(FPMCU_MASK, FPMCU_DISABLED))) { - printk(BIOS_INFO, "Disabling FP pads\n"); - gpio_configure_pads(fp_disable_pads, ARRAY_SIZE(fp_disable_pads)); + if (fw_config_probe(FW_CONFIG(FP_MCU, FP_ABSENT))) { + printk(BIOS_INFO, "Configure GPIOs for no FP module.\n"); + gpio_padbased_override(padbased_table, fp_disable_pads, ARRAY_SIZE(fp_disable_pads)); } } -BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/brya/variants/dochi/overridetree.cb b/src/mainboard/google/brya/variants/dochi/overridetree.cb index baa2f0a8c5..d44409e7c3 100644 --- a/src/mainboard/google/brya/variants/dochi/overridetree.cb +++ b/src/mainboard/google/brya/variants/dochi/overridetree.cb @@ -1,7 +1,7 @@ fw_config - field FPMCU_MASK 10 - option FPMCU_DISABLED 0 - option FPMCU_ENABLED 1 + field FP_MCU 9 10 + option FP_ABSENT 0 + option FP_MCU_NUVOTON 1 end field STORAGE 30 31 option STORAGE_UNKNOWN 0 @@ -279,7 +279,7 @@ chip soc/intel/alderlake register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" device spi 0 on - probe FPMCU_MASK FPMCU_ENABLED + probe FP_MCU FP_MCU_NUVOTON end end # FPMCU end diff --git a/src/mainboard/google/brya/variants/dochi/variant.c b/src/mainboard/google/brya/variants/dochi/variant.c index ae8488481c..4c24347153 100644 --- a/src/mainboard/google/brya/variants/dochi/variant.c +++ b/src/mainboard/google/brya/variants/dochi/variant.c @@ -6,6 +6,6 @@ void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config) { - if (fw_config_probe(FW_CONFIG(FPMCU_MASK, FPMCU_DISABLED))) + if (fw_config_probe(FW_CONFIG(FP_MCU, FP_ABSENT))) config->serial_io_gspi_mode[PchSerialIoIndexGSPI1] = PchSerialIoDisabled; } |