diff options
| author | Alex Levin <levinale@chromium.org> | 2020-07-23 11:55:12 -0700 |
|---|---|---|
| committer | Patrick Georgi <pgeorgi@google.com> | 2020-07-27 05:11:23 +0000 |
| commit | ff1c5bec03cd2fe442ead488c62643ae38952037 (patch) | |
| tree | f17d2b610b2f6bf404d990a4a76c669344708549 /src/mainboard/google/volteer/variants/volteer2 | |
| parent | 061f0d205bfd5d8105b57a9f5288e87833bbfcf7 (diff) | |
mb/google/volteer: Add gpio-keys ACPI node for PENH
Use gpio_keys driver to add ACPI node for pen eject event. Also
setting gpio wake pin for wake events.
Removal and insertion (both edges) triggers IRQ and only removal is a
wake event (rising edge).
Adding for both Volteer and Volteer2 variants.
BUG=b:146083964
BRANCH=None
TEST=tested on a Volteer
Change-Id: Ida3217a5b156320856ce3302c2623eba2230f28d
Signed-off-by: Alex Levin <levinale@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43764
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google/volteer/variants/volteer2')
| -rw-r--r-- | src/mainboard/google/volteer/variants/volteer2/overridetree.cb | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb index c32b80e9ec..9c78b94c90 100644 --- a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb @@ -67,6 +67,19 @@ chip soc/intel/tigerlake register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + # GPP_B3 is the IRQ source, and GPP_E1 is the wake source + register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_B3)" + register "key.wake_gpe" = "GPE0_DW2_01" + register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on end + end end # I2C1 0xA0E9 device pci 15.2 on chip drivers/i2c/sx9310 |