diff options
| author | Tim Wawrzynczak <twawrzynczak@chromium.org> | 2021-03-22 10:43:42 -0600 |
|---|---|---|
| committer | Tim Wawrzynczak <twawrzynczak@chromium.org> | 2021-05-06 04:12:59 +0000 |
| commit | 59a621abc70464352eaf540bd6cb896935b9ba72 (patch) | |
| tree | fec081238c01e28e0d31733444ed7ec7d7695a61 /src/mainboard/google/volteer/variants/lindar | |
| parent | 6dc72022a5b8cfb0299e741b86d26b6a208838f1 (diff) | |
soc/intel/tgl,mb/google/volteer: Add API for Type-C aux bias pads
TGL boards using the Type-C subsystem for USB Type-C ports without a
retimer attached may require a DC bias on the aux lines for certain
modes to work. This patch adds native coreboot support for programming
the IOM to handle this DC bias via a simple devicetree
setting. Previously a UPD was required to tell the FSP which GPIOs were
used for the pullup and pulldown biases, but the API for this UPD was
effectively undocumented.
BUG=b:174116646
TEST=Verified on volteer2 that a Type-C flash drive is enumerated
succesfully on all ports. Verified all major power flows (boot, reboot,
powerdown and S0ix/suspend) still work as expected.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I70e36a41e760f4a435511c147cc5744a77dbccc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/mainboard/google/volteer/variants/lindar')
| -rw-r--r-- | src/mainboard/google/volteer/variants/lindar/overridetree.cb | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/src/mainboard/google/volteer/variants/lindar/overridetree.cb b/src/mainboard/google/volteer/variants/lindar/overridetree.cb index 5edd6db89c..8274531a8e 100644 --- a/src/mainboard/google/volteer/variants/lindar/overridetree.cb +++ b/src/mainboard/google/volteer/variants/lindar/overridetree.cb @@ -2,8 +2,8 @@ chip soc/intel/tigerlake register "DdiPort1Hpd" = "0" register "DdiPort2Hpd" = "0" register "TcssAuxOri" = "1" - register "IomTypeCPortPadCfg[0]" = "0x090E000A" - register "IomTypeCPortPadCfg[1]" = "0x090E000D" + register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E10, .pad_auxn_dc = GPP_E13}" + # USB Port Config register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-A / Type-C C1 |