mb/google/slippy: Factor out common romstage settings

There's no need to repeat the same values over four variants.

Change-Id: Ifc4a9961fe9c87f15a6039e6e478682fab5b0bb7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>

1 files changed, 30 insertions, 98 deletions

diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c
index 7ebb7aa61c..fd8e63275c 100644
--- a/src/mainboard/google/slippy/variants/wolf/romstage.c
+++ b/src/mainboard/google/slippy/variants/wolf/romstage.c
@@ -13,46 +13,6 @@
 #include <variant/gpio.h>
 #include "../../variant.h"
 
-const struct rcba_config_instruction rcba_config[] = {
-
-	/*
-	 *             GFX    INTA -> PIRQA (MSI)
-	 * D28IP_P1IP  PCIE   INTA -> PIRQA
-	 * D29IP_E1P   EHCI   INTA -> PIRQD
-	 * D20IP_XHCI  XHCI   INTA -> PIRQC (MSI)
-	 * D31IP_SIP   SATA   INTA -> PIRQF (MSI)
-	 * D31IP_SMIP  SMBUS  INTB -> PIRQG
-	 * D31IP_TTIP  THRT   INTC -> PIRQA
-	 * D27IP_ZIP   HDA    INTA -> PIRQG (MSI)
-	 */
-
-	/* Device interrupt pin register (board specific) */
-	RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
-			(INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
-	RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)),
-	RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
-			(INTB << D28IP_P4IP)),
-	RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)),
-	RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)),
-	RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)),
-	RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)),
-
-	/* Device interrupt route registers */
-	RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */
-	RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */
-	RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */
-	RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */
-	RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */
-	RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */
-	RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */
-	RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */
-
-	/* Disable unused devices (board specific) */
-	RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
-
-	RCBA_END_CONFIG,
-};
-
 /* Copy SPD data for on-board memory */
 static void copy_spd(struct pei_data *peid)
 {
@@ -91,67 +51,39 @@ static void copy_spd(struct pei_data *peid)
 	}
 }
 
-void variant_romstage_entry(void)
+void variant_romstage_entry(struct romstage_params *rp)
 {
-	struct pei_data pei_data = {
-		.pei_version = PEI_VERSION,
-		.mchbar = (uintptr_t)DEFAULT_MCHBAR,
-		.dmibar = (uintptr_t)DEFAULT_DMIBAR,
-		.epbar = DEFAULT_EPBAR,
-		.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
-		.smbusbar = SMBUS_IO_BASE,
-		.hpet_address = HPET_ADDR,
-		.rcba = (uintptr_t)DEFAULT_RCBA,
-		.pmbase = DEFAULT_PMBASE,
-		.gpiobase = DEFAULT_GPIOBASE,
-		.temp_mmio_base = 0xfed08000,
-		.system_type = 5, /* ULT */
-		.tseg_size = CONFIG_SMM_TSEG_SIZE,
-		.spd_addresses = { 0xff, 0x00, 0xff, 0x00 },
-		.ec_present = 1,
-		// 0 = leave channel enabled
-		// 1 = disable dimm 0 on channel
-		// 2 = disable dimm 1 on channel
-		// 3 = disable dimm 0+1 on channel
-		.dimm_channel0_disabled = 2,
-		.dimm_channel1_disabled = 2,
-		.max_ddr3_freq = 1600,
-		.usb_xhci_on_resume = 1,
-		.usb2_ports = {
-			/* Length, Enable, OCn#, Location */
-			{ 0x0040, 1, 0,               /* P0: Port A, CN10 */
-			  USB_PORT_BACK_PANEL },
-			{ 0x0040, 1, 2,               /* P1: Port B, CN11  */
-			  USB_PORT_BACK_PANEL },
-			{ 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */
-			  USB_PORT_INTERNAL },
-			{ 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */
-			  USB_PORT_MINI_PCIE },
-			{ 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */
-			  USB_PORT_INTERNAL },
-			{ 0x0000, 1, USB_OC_PIN_SKIP, /* P5: EMPTY */
-			  USB_PORT_SKIP },
-			{ 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */
-			  USB_PORT_INTERNAL },
-			{ 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */
-			  USB_PORT_SKIP  },
-		},
-		.usb3_ports = {
-			/* Enable, OCn# */
-			{ 1, 0               }, /* P1; Port A, CN10 */
-			{ 1, 2               }, /* P2; Port B, CN11  */
-			{ 0, USB_OC_PIN_SKIP }, /* P3; */
-			{ 0, USB_OC_PIN_SKIP }, /* P4; */
-		},
+	struct usb2_port_setting usb2_ports[MAX_USB2_PORTS] = {
+		/* Length, Enable, OCn#, Location */
+		{ 0x0040, 1, 0,               /* P0: Port A, CN10 */
+		  USB_PORT_BACK_PANEL },
+		{ 0x0040, 1, 2,               /* P1: Port B, CN11  */
+		  USB_PORT_BACK_PANEL },
+		{ 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */
+		  USB_PORT_INTERNAL },
+		{ 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */
+		  USB_PORT_MINI_PCIE },
+		{ 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */
+		  USB_PORT_INTERNAL },
+		{ 0x0000, 1, USB_OC_PIN_SKIP, /* P5: EMPTY */
+		  USB_PORT_SKIP },
+		{ 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */
+		  USB_PORT_INTERNAL },
+		{ 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */
+		  USB_PORT_SKIP  },
 	};
 
-	struct romstage_params romstage_params = {
-		.pei_data = &pei_data,
-		.gpio_map = &mainboard_gpio_map,
-		.rcba_config = &rcba_config[0],
-		.copy_spd = copy_spd,
+	struct usb3_port_setting usb3_ports[MAX_USB3_PORTS] = {
+		/* Enable, OCn# */
+		{ 1, 0               }, /* P1; Port A, CN10 */
+		{ 1, 2               }, /* P2; Port B, CN11  */
+		{ 0, USB_OC_PIN_SKIP }, /* P3; */
+		{ 0, USB_OC_PIN_SKIP }, /* P4; */
 	};
 
-	/* Call into the real romstage main with this board's attributes. */
-	romstage_common(&romstage_params);
+	memcpy(rp->pei_data->usb2_ports, usb2_ports, sizeof(usb2_ports));
+	memcpy(rp->pei_data->usb3_ports, usb3_ports, sizeof(usb3_ports));
+
+	rp->gpio_map = &mainboard_gpio_map;
+	rp->copy_spd = copy_spd;
 }