mb/google/skyrim: Create whiterun variant

Create the whiterun variant of the skyrim reference board by
copying the winterhold files to a new directory named for the variant.

BUG=b:265955979
BRANCH=None
TEST=emerge-skyrim coreboot and boot up on Whiterun

Change-Id: I3539f84e79c05936fe006bfe9d08743d6a9a6ba7
Signed-off-by: Isaac Lee <isaaclee@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72483
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

8 files changed, 473 insertions, 0 deletions

diff --git a/src/mainboard/google/skyrim/variants/whiterun/Makefile.inc b/src/mainboard/google/skyrim/variants/whiterun/Makefile.inc
new file mode 100644
index 0000000000..db72b152a7
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/Makefile.inc
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+subdirs-y += ./memory
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/skyrim/variants/whiterun/gpio.c b/src/mainboard/google/skyrim/variants/whiterun/gpio.c
new file mode 100644
index 0000000000..340bfb6fd2
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/gpio.c
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+#include <gpio.h>
+
+/* GPIO configuration in ramstage */
+static const struct soc_amd_gpio override_gpio_table[] = {
+
+	/* SOC_PEN_DETECT_ODL */
+	PAD_NC(GPIO_3),
+
+	/* EN_PWR_WWAN_X */
+	PAD_NC(GPIO_8),
+
+	/* SD_AUX_RST_SOC_L */
+	PAD_NC(GPIO_27),
+
+	/* WWAN_RST_L */
+	PAD_NC(GPIO_42),
+
+};
+
+void variant_override_gpio_table(const struct soc_amd_gpio **gpio, size_t *size)
+{
+	*size = ARRAY_SIZE(override_gpio_table);
+	*gpio = override_gpio_table;
+}
diff --git a/src/mainboard/google/skyrim/variants/whiterun/include/variant/acpi/dtts.asl b/src/mainboard/google/skyrim/variants/whiterun/include/variant/acpi/dtts.asl
new file mode 100644
index 0000000000..9bac487cd7
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/include/variant/acpi/dtts.asl
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+External(\_SB.DTTB, MethodObj)
+External(\_SB.DTTC, MethodObj)
+External(\_SB.DTTD, MethodObj)
+External(\_SB.DTTE, MethodObj)
+External(\_SB.DTTF, MethodObj)
+
+Scope (\_SB)
+{
+    //---------------------------------------------
+    // Table | A | B | C | D | E | F | First boot |
+    //---------------------------------------------
+    // PRTN  | 0 | 1 | 2 | 3 | 4 | 5 |     7      |
+    //---------------------------------------------
+    Name (PRTN, 7)
+
+    Method (DTTS, 0, Serialized)
+    {
+        // Set table A as default table after power on device
+        If (\_SB.PRTN == 7)
+        {
+            \_SB.DDEF()
+            \_SB.PRTN = 0
+            Return (0)
+        }
+
+        If (\_SB.PCI0.LPCB.EC0.STTB == 0) { // Desktop
+            If (\_SB.PCI0.LPCB.EC0.LIDS == 1) { // Lid-open
+                // Table A/B
+                If ((\_SB.PRTN == 0) || (\_SB.PRTN == 1)) {
+                    // AMB sensor trigger point
+                    // 50C will store 123(0x7B) in mapped memory
+                    // 50C=323K, 323-200(offset)=123(0x7B)
+                    If (\_SB.PCI0.LPCB.EC0.TIN4 >= 123) {
+                        \_SB.DTTB()
+                        \_SB.PRTN = 1
+                        Return (0)
+                    }
+                    // AMB sensor release point
+                    If ((\_SB.PCI0.LPCB.EC0.TIN4 <= 118)) {
+                        \_SB.DDEF()
+                        \_SB.PRTN = 0
+                        Return (0)
+                    }
+                    // Keep tht previous thermal table
+                    Return (0)
+                } Else {
+                    If (\_SB.PRTN == 3 || \_SB.PRTN == 5) {
+                        \_SB.DTTB()
+                        \_SB.PRTN = 1
+                        Return (0)
+                    } Else {
+                        \_SB.DDEF()
+                        \_SB.PRTN = 0
+                        Return (0)
+                    }
+                }
+            } Else { // Lid-close
+                // Table C/D
+                If (\_SB.PRTN == 2 || \_SB.PRTN == 3) {
+                    If (\_SB.PCI0.LPCB.EC0.TIN4 >= 128) {
+                        \_SB.DTTD()
+                        \_SB.PRTN = 3
+                        Return (0)
+                    }
+                    If(\_SB.PCI0.LPCB.EC0.TIN4 <= 123) {
+                        \_SB.DTTC()
+                        \_SB.PRTN = 2
+                        Return (0)
+                    }
+                    // Keep tht previous thermal table
+                    Return (0)
+                } Else {
+                    If (\_SB.PRTN == 1 || \_SB.PRTN == 5) {
+                        \_SB.DTTD()
+                        \_SB.PRTN = 3
+                        Return (0)
+                    } Else {
+                        \_SB.DTTC()
+                        \_SB.PRTN = 2
+                        Return (0)
+                    }
+                }
+            }
+        } Else { // Laptop
+            // Table E/F
+            If (\_SB.PRTN == 4 || \_SB.PRTN == 5) {
+                // AMB sensor trigger point
+                If (\_SB.PCI0.LPCB.EC0.TIN4 >= 118) {
+                    \_SB.DTTF()
+                    \_SB.PRTN = 5
+                    Return (0)
+                }
+                // AMB sensor release point
+                If ((\_SB.PCI0.LPCB.EC0.TIN4 <= 113)) {
+                    \_SB.DTTE()
+                    \_SB.PRTN = 4
+                    Return (0)
+                }
+                // Keep tht previous thermal table
+                Return (0)
+            } Else {
+                If (\_SB.PRTN == 1 || \_SB.PRTN == 3) {
+                    \_SB.DTTF()
+                    \_SB.PRTN = 5
+                    Return (0)
+                } Else {
+                    \_SB.DTTE()
+                    \_SB.PRTN = 4
+                    Return (0)
+                }
+            }
+        } // Desktop/Laptop End
+    }
+}
diff --git a/src/mainboard/google/skyrim/variants/whiterun/include/variant/ec.h b/src/mainboard/google/skyrim/variants/whiterun/include/variant/ec.h
new file mode 100644
index 0000000000..9e61a440cf
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/include/variant/ec.h
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/ec.h>
diff --git a/src/mainboard/google/skyrim/variants/whiterun/memory/Makefile.inc b/src/mainboard/google/skyrim/variants/whiterun/memory/Makefile.inc
new file mode 100644
index 0000000000..d352edb53f
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/memory/Makefile.inc
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# This is an auto-generated file. Do not edit!!
+# Generated by:
+# util/spd_tools/bin/part_id_gen MDN lp5 src/mainboard/google/skyrim/variants/whiterun/memory src/mainboard/google/skyrim/variants/whiterun/memory/mem_parts_used.txt
+
+SPD_SOURCES =
+SPD_SOURCES += spd/lp5/set-1/spd-5.hex      # ID = 0(0b0000)  Parts = K3LKLKL0EM-MGCN
+SPD_SOURCES += spd/lp5/set-1/spd-1.hex      # ID = 1(0b0001)  Parts = MT62F512M32D2DR-031 WT:B, H9JCNNNBK3MLYR-N6E
+SPD_SOURCES += spd/lp5/set-1/spd-3.hex      # ID = 2(0b0010)  Parts = K3LKBKB0BM-MGCP, H58G56AK6BX069
+SPD_SOURCES += spd/lp5/set-1/spd-2.hex      # ID = 3(0b0011)  Parts = MT62F1G32D4DR-031 WT:B
+SPD_SOURCES += spd/lp5/set-1/spd-7.hex      # ID = 4(0b0100)  Parts = MT62F1G32D2DS-026 WT:B, K3KL8L80CM-MGCT, H58G56BK7BX068
+SPD_SOURCES += spd/lp5/set-1/spd-6.hex      # ID = 5(0b0101)  Parts = K3LKCKC0BM-MGCP, H58G66AK6BX070
+SPD_SOURCES += spd/lp5/set-1/spd-4.hex      # ID = 6(0b0110)  Parts = MT62F2G32D8DR-031 WT:B
+SPD_SOURCES += spd/lp5/set-1/spd-8.hex      # ID = 7(0b0111)  Parts = MT62F2G32D4DS-026 WT:B, K3KL9L90CM-MGCT, H58G66BK7BX067
diff --git a/src/mainboard/google/skyrim/variants/whiterun/memory/dram_id.generated.txt b/src/mainboard/google/skyrim/variants/whiterun/memory/dram_id.generated.txt
new file mode 100644
index 0000000000..107147e053
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/memory/dram_id.generated.txt
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# This is an auto-generated file. Do not edit!!
+# Generated by:
+# util/spd_tools/bin/part_id_gen MDN lp5 src/mainboard/google/skyrim/variants/whiterun/memory src/mainboard/google/skyrim/variants/whiterun/memory/mem_parts_used.txt
+
+DRAM Part Name                 ID to assign
+K3LKLKL0EM-MGCN                0 (0000)
+MT62F512M32D2DR-031 WT:B       1 (0001)
+H9JCNNNBK3MLYR-N6E             1 (0001)
+K3LKBKB0BM-MGCP                2 (0010)
+H58G56AK6BX069                 2 (0010)
+MT62F1G32D4DR-031 WT:B         3 (0011)
+MT62F1G32D2DS-026 WT:B         4 (0100)
+K3KL8L80CM-MGCT                4 (0100)
+K3LKCKC0BM-MGCP                5 (0101)
+H58G66AK6BX070                 5 (0101)
+MT62F2G32D8DR-031 WT:B         6 (0110)
+MT62F2G32D4DS-026 WT:B         7 (0111)
+K3KL9L90CM-MGCT                7 (0111)
+H58G56BK7BX068                 4 (0100)
+H58G66BK7BX067                 7 (0111)
diff --git a/src/mainboard/google/skyrim/variants/whiterun/memory/mem_parts_used.txt b/src/mainboard/google/skyrim/variants/whiterun/memory/mem_parts_used.txt
new file mode 100644
index 0000000000..eda02b88c2
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/memory/mem_parts_used.txt
@@ -0,0 +1,15 @@
+K3LKLKL0EM-MGCN,
+MT62F512M32D2DR-031 WT:B,
+H9JCNNNBK3MLYR-N6E,
+K3LKBKB0BM-MGCP,
+H58G56AK6BX069,
+MT62F1G32D4DR-031 WT:B,
+MT62F1G32D2DS-026 WT:B,
+K3KL8L80CM-MGCT,
+K3LKCKC0BM-MGCP,
+H58G66AK6BX070,
+MT62F2G32D8DR-031 WT:B,
+MT62F2G32D4DS-026 WT:B,
+K3KL9L90CM-MGCT,
+H58G56BK7BX068,
+H58G66BK7BX067,
diff --git a/src/mainboard/google/skyrim/variants/whiterun/overridetree.cb b/src/mainboard/google/skyrim/variants/whiterun/overridetree.cb
new file mode 100644
index 0000000000..04da26c62e
--- /dev/null
+++ b/src/mainboard/google/skyrim/variants/whiterun/overridetree.cb
@@ -0,0 +1,271 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+chip soc/amd/mendocino
+
+	# Set DPTC multi-profile common parameters
+
+	# Refer the spec "FT6 Infrastructure Roadmap"#57316
+	# Set system_configuration to 4 for 15W
+	register "system_configuration" = "4"
+	register "thermctl_limit_degreeC" = "97"
+
+	register "stt_control" = "1"
+	register "stt_pcb_sensor_count" = "2"
+	register "stt_alpha_apu" = "0x199A"
+	register "stt_error_coeff" = "0x21"
+	register "stt_error_rate_coefficient" = "0xCCD"
+
+	# These registers are defined in AMD DevHub document #57316.
+	# Normal
+	register "vrm_current_limit_mA"                  = "28000"
+	register "vrm_maximum_current_limit_mA"          = "50000"
+	register "vrm_soc_current_limit_mA"              = "10000"
+	# Throttle (e.g., Low/No Battery)
+	register "vrm_current_limit_throttle_mA"         = "20000"
+	register "vrm_maximum_current_limit_throttle_mA" = "20000"
+	register "vrm_soc_current_limit_throttle_mA"     = "10000"
+
+	# Set Dynamic DPTC thermal profile Table A (Default)
+	register "fast_ppt_limit_mW" = "30000"
+	register "slow_ppt_limit_mW" = "18000"
+	register "slow_ppt_time_constant_s" = "7"
+	register "sustained_power_limit_mW" = "15000"
+
+	register "stt_min_limit" = "7000"
+	register "stt_m1" = "0x148"
+	register "stt_m2" = "0x38F"
+	register "stt_c_apu" = "0xDF9A"
+	register "stt_skin_temp_apu" = "0x3200"
+
+	# Set Dynamic DPTC thermal profile confiuration. Table B
+	register "fast_ppt_limit_mW_B" = "20000"
+	register "slow_ppt_limit_mW_B" = "13000"
+	register "slow_ppt_time_constant_s_B" = "5"
+	register "sustained_power_limit_mW_B" = "10000"
+
+	register "stt_min_limit_B" = "5000"
+	register "stt_m1_B" = "0x11F"
+	register "stt_m2_B" = "0x3AE"
+	register "stt_c_apu_B" = "0xE19A"
+	register "stt_skin_temp_apu_B" = "0x3400"
+
+	# Set Dynamic DPTC thermal profile confiuration. Table C
+	register "fast_ppt_limit_mW_C" = "30000"
+	register "slow_ppt_limit_mW_C" = "22000"
+	register "slow_ppt_time_constant_s_C" = "10"
+	register "sustained_power_limit_mW_C" = "15000"
+
+	register "stt_min_limit_C" = "10000"
+	register "stt_m1_C" = "0x1A4"
+	register "stt_m2_C" = "0x2E1"
+	register "stt_c_apu_C" = "0xDACD"
+	register "stt_skin_temp_apu_C" = "0x3600"
+
+	# Set Dynamic DPTC thermal profile confiuration. Table D
+	register "fast_ppt_limit_mW_D" = "25000"
+	register "slow_ppt_limit_mW_D" = "15000"
+	register "slow_ppt_time_constant_s_D" = "8"
+	register "sustained_power_limit_mW_D" = "10000"
+
+	register "stt_min_limit_D" = "8000"
+	register "stt_m1_D" = "0x1C3"
+	register "stt_m2_D" = "0x2BB"
+	register "stt_c_apu_D" = "0xDE00"
+	register "stt_skin_temp_apu_D" = "0x3800"
+
+	# Set Dynamic DPTC thermal profile confiuration. Table E
+	register "fast_ppt_limit_mW_E" = "22000"
+	register "slow_ppt_limit_mW_E" = "15000"
+	register "slow_ppt_time_constant_s_E" = "4"
+	register "sustained_power_limit_mW_E" = "12000"
+
+	register "stt_min_limit_E" = "7000"
+	register "stt_m1_E" = "0x114"
+	register "stt_m2_E" = "0x371"
+	register "stt_c_apu_E" = "0xE333"
+	register "stt_skin_temp_apu_E" = "0x3000"
+
+
+	# Set Dynamic DPTC thermal profile confiuration. Table F
+	register "fast_ppt_limit_mW_F" = "18000"
+	register "slow_ppt_limit_mW_F" = "12000"
+	register "slow_ppt_time_constant_s_F" = "2"
+	register "sustained_power_limit_mW_F" = "9000"
+
+	register "stt_min_limit_F" = "5000"
+	register "stt_m1_F" = "0x15C"
+	register "stt_m2_F" = "0x33D"
+	register "stt_c_apu_F" = "0xE866"
+	register "stt_skin_temp_apu_F" = "0x3200"
+
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST,
+		.speed_config[0] = {
+			.speed = I2C_SPEED_FAST,
+			.scl_hcnt = 107,
+			.scl_lcnt = 230,
+			.sda_hold = 100
+		}
+	}"
+
+	device domain 0 on
+
+		register "dxio_tx_vboost_enable" = "1"
+
+		device ref gpp_bridge_1 on
+			# Required so the NVMe gets placed into D3 when entering S0i3.
+			chip drivers/pcie/rtd3/device
+				register "name" = ""NVME""
+				device pci 00.0 on end
+			end
+		end # eMMC
+		device ref gpp_bridge_2 on
+			# Required so the NVMe gets placed into D3 when entering S0i3.
+			chip drivers/pcie/rtd3/device
+				register "name" = ""NVME""
+				device pci 00.0 on end
+			end
+		end # NVMe
+
+		device ref gpp_bridge_a on  # Internal GPP Bridge 0 to Bus A
+			device ref xhci_1 on # XHCI1 controller
+				chip drivers/usb/acpi
+					device ref xhci_1_root_hub on # XHCI1 root hub
+						chip drivers/usb/acpi
+							device ref usb3_port3 on # USB 3.1 port3
+								chip drivers/usb/acpi
+									register "desc" = ""USB3 Type-A Port A0 (MLB)""
+									register "type" = "UPC_TYPE_USB3_A"
+									register "use_custom_pld" = "true"
+									register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
+									device usb 3.2 on end
+								end
+							end # USB 3.1 port3
+						end
+						chip drivers/usb/acpi
+							device ref usb2_port3 on # USB 2 port3
+								chip drivers/usb/acpi
+									register "desc" = ""USB2 Type-A Port A0 (MLB)""
+									register "type" = "UPC_TYPE_USB3_A"
+									register "use_custom_pld" = "true"
+									register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
+									device usb 2.2 on end
+								end
+							end # USB 2 port3
+						end
+					end # XHCI1 root hub
+				end
+			end # XHCI1 controller
+		end # Internal GPP Bridge 0 to Bus A
+	end # domain
+
+	device ref i2c_0 on
+		chip drivers/i2c/generic
+			register "hid" = ""ELAN0000""
+			register "desc" = ""ELAN Touchpad""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_40)"
+			register "wake" = "GEVENT_20"
+			register "detect" = "1"
+			device i2c 15 on end
+		end
+		chip drivers/i2c/hid
+			register "generic.hid" = ""GXTP7863""
+			register "generic.desc" = ""Goodix Touchpad""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_40)"
+			register "generic.wake" = "GEVENT_20"
+			register "generic.detect" = "1"
+			register "hid_desc_reg_offset" = "0x20"
+			device i2c 2c on end
+		end
+	end # I2C0
+	device ref i2c_1 on
+		chip drivers/i2c/hid
+			register "generic.hid" = ""ELAN900C""
+			register "generic.desc" = ""ELAN Touchscreen""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_29)"
+			register "generic.detect" = "1"
+			register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)"
+			register "generic.enable_delay_ms" = "10"
+			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)"
+			register "generic.reset_off_delay_ms" = "1"
+			register "generic.reset_delay_ms" = "10"
+			register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)"
+			register "generic.stop_delay_ms" = "180"
+			register "generic.stop_off_delay_ms" = "1"
+			register "generic.has_power_resource" = "1"
+			register "hid_desc_reg_offset" = "0x01"
+			device i2c 10 on end
+		end
+		chip drivers/i2c/generic
+			register "hid" = ""MLFS0000""
+			register "desc" = ""Melfas Touchscreen""
+			register "detect" = "1"
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_29)"
+			register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)"
+			register "enable_delay_ms" = "1"
+			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)"
+			register "reset_delay_ms" = "20"
+			register "reset_off_delay_ms" = "2"
+			register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)"
+			register "stop_off_delay_ms" = "2"
+			register "has_power_resource" = "1"
+			device i2c 34 on end
+		end
+		chip drivers/generic/gpio_keys
+			register "name" = ""PENH""
+			register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_3)"
+			register "key.dev_name" = ""EJCT""
+			register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+			register "key.linux_code" = "SW_PEN_INSERTED"
+			register "key.linux_input_type" = "EV_SW"
+			register "key.label" = ""pen_eject""
+			register "key.debounce_interval" = "100"
+			register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
+			device generic 0 on end
+		end
+	end # I2C1
+	device ref i2c_2 on
+		chip drivers/i2c/generic
+			register "hid" = ""RTL5682""
+			register "name" = ""RT58""
+			register "desc" = ""Realtek RT5682""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
+			register "property_count" = "1"
+			register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+			register "property_list[0].name" = ""realtek,jd-src""
+			register "property_list[0].integer" = "1"
+			device i2c 1a on end
+		end
+		chip drivers/i2c/generic
+			register "hid" = ""10EC1019""
+			register "desc" = ""Realtek SPK AMP R""
+			register "uid" = "1"
+			device i2c 29 on end
+		end
+		chip drivers/i2c/generic
+			register "hid" = ""10EC1019""
+			register "desc" = ""Realtek SPK AMP L""
+			register "uid" = "2"
+			register "probed" = "1"
+			device i2c 2a on end
+		end
+	end # I2C2
+
+	device ref uart_1 on
+		chip drivers/uart/acpi
+			register "name" = ""CRFP""
+			register "desc" = ""Fingerprint Reader""
+			register "hid" = "ACPI_DT_NAMESPACE_HID"
+			register "compat_string" = ""google,cros-ec-uart""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)"
+			register "wake" = "GEVENT_15"
+			register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)"
+			register "has_power_resource" = "1"
+			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)"
+			register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)"
+			register "enable_delay_ms" = "3"
+			device generic 0 alias fpmcu on end
+		end
+	end # UART1
+
+end	# chip soc/amd/mendocino