Add Baytrail ChromeOS devices using variant scheme

Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty,
heli, kip, orco, quawks, squawks, sumo, swanky, and winky using
their common reference board (rambi) as a base.

Chromium sources used:
firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...]
firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...]
firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...]
firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...]
firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...]
firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...]
firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*]
firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.]
firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data]
firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data]
firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...]
firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table]
firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...]

The same basic cleanup/changes are made here as with the initial BYT
variant commit:
 - remove unused ACPI trackpad/touchscreen devices
 - correct I2C addresses in SMBIOS entries
 - clean up comment formatting
 - remove ACPI device for unused light sensor
 - switch I2C ACPI devices from edge to level triggered interrupts,
   for better compatibility/functionality (and to be consistent
   with other recently-upstreamed ChromeOS devices)
 - Micron 2GB SPD file for kip with updated values renamed to distinguish
   from same file used by other boards

Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18164
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

8 files changed, 712 insertions, 0 deletions

diff --git a/src/mainboard/google/rambi/variants/sumo/Makefile.inc b/src/mainboard/google/rambi/variants/sumo/Makefile.inc
new file mode 100644
index 0000000000..b2552d32b4
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/Makefile.inc
@@ -0,0 +1,49 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2013 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+
+SPD_BIN = $(obj)/spd.bin
+
+# Order matters for SPD sources. The following indicies
+# define the SPD data to use.
+# 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz
+# 0b001 - 4GiB total - 2 x 2GiB Hynix  H5TC4G63AFR-PBA 1600MHz
+# 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz
+# 0b011 - 2GiB total - 2 x 1GiB Hynix  H5TC2G63FFR-PBA 1600MHz
+# 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz
+# 0b101 - 2GiB total - 1 x 2GiB Hynix  H5TC4G63AFR-PBA 1600MHz
+# 0b110 - 4GiB total - 2 x 2GiB Hynix  H5TC4G63CFR-PBA 1600MHz
+# 0b111 - 2GiB total - 1 x 2GiB Hynix  H5TC4G63CFR-PBA 1600MHz
+SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125
+SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA
+SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125
+SPD_SOURCES += hynix_1GiB_dimm_H5TC2G63FFR-PBA
+SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125
+SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA
+SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA
+SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex)
+
+# Include spd ROM data
+$(SPD_BIN): $(SPD_DEPS)
+	for f in $+; \
+	  do for c in $$(cat $$f | grep -v ^#); \
+	    do printf $$(printf '\%o' 0x$$c); \
+	  done; \
+	done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/google/rambi/variants/sumo/devicetree.cb b/src/mainboard/google/rambi/variants/sumo/devicetree.cb
new file mode 100644
index 0000000000..89e2f2b073
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/devicetree.cb
@@ -0,0 +1,102 @@
+chip soc/intel/baytrail
+
+	# SATA port enable mask (2 ports)
+	register "sata_port_map" = "0x1"
+	register "sata_ahci" = "0x1"
+	register "ide_legacy_combined" = "0x0"
+
+	# Route USB ports to XHCI
+	register "usb_route_to_xhci" = "1"
+
+	# USB Port Disable Mask
+	register "usb2_port_disable_mask" = "0x0"
+	register "usb3_port_disable_mask" = "0x0"
+
+	# USB PHY settings
+	# TODO: These values are from Baytrail and need tuned for Sumo board
+	register "usb2_per_port_lane0" = "0x00049a09"
+	register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d"
+	register "usb2_per_port_lane1" = "0x00049a09"
+	register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d"
+	register "usb2_per_port_lane2" = "0x00049209"
+	register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015"
+	register "usb2_per_port_lane3" = "0x00049a09"
+	register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d"
+	register "usb2_comp_bg" = "0x4700"
+
+	# LPE audio codec settings
+	register "lpe_codec_clk_freq" = "25" # 25MHz clock
+	register "lpe_codec_clk_num" = "0"   # PMC_PLT_CLK[0]
+
+	# SD Card controller
+	register "sdcard_cap_low" = "0x036864b2"
+	register "sdcard_cap_high" = "0x0"
+
+	# Enable devices in ACPI mode
+	register "lpe_acpi_mode" = "1"
+	register "lpss_acpi_mode" = "1"
+	register "scc_acpi_mode" = "1"
+
+	# Allow PCIe devices to wake system from suspend
+	register "pcie_wake_enable" = "1"
+
+	# Enable PIPEA as DP_C
+	register "gpu_pipea_port_select" = "2"		# DP_C
+	register "gpu_pipea_power_cycle_delay" = "6"	# 600ms
+	register "gpu_pipea_power_on_delay" = "5000"	# 500ms
+	register "gpu_pipea_light_on_delay" = "70"	# 7ms
+	register "gpu_pipea_power_off_delay" = "500"	# 50ms
+	register "gpu_pipea_light_off_delay" = "2000"	# 200ms
+
+	# VR PS2 control
+	register "vnn_ps2_enable" = "1"
+	register "vcc_ps2_enable" = "1"
+
+	# Disable SLP_X stretching after SUS power well fail.
+	register "disable_slp_x_stretch_sus_fail" = "1"
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+	device domain 0 on
+		device pci 00.0 on  end # SoC router
+		device pci 02.0 on  end # GFX
+		device pci 11.0 off end # SDIO
+		device pci 12.0 on  end # SD
+		device pci 13.0 on  end # SATA
+		device pci 14.0 on  end # XHCI
+		device pci 15.0 on  end # LPE
+		device pci 17.0 on  end # MMC
+		device pci 18.0 on  end # SIO_DMA1
+		device pci 18.1 on  end # I2C1
+		device pci 18.2 on  end # I2C2
+		device pci 18.3 off end # I2C3
+		device pci 18.4 off end # I2C4
+		device pci 18.5 off end # I2C5
+		device pci 18.6 on  end # I2C6
+		device pci 18.7 off end # I2C7
+		device pci 1a.0 on  end # TXE
+		device pci 1b.0 on  end # HDA
+		device pci 1c.0 on  end # PCIE_PORT1
+		device pci 1c.1 off end # PCIE_PORT2
+		device pci 1c.2 on  end # PCIE_PORT3
+		device pci 1c.3 on  end # PCIE_PORT4
+		device pci 1d.0 on  end # EHCI
+		device pci 1e.0 on  end # SIO_DMA2
+		device pci 1e.1 off end # PWM1
+		device pci 1e.2 off end # PWM2
+		device pci 1e.3 off end # HSUART1
+		device pci 1e.4 off end # HSUART2
+		device pci 1e.5 off end # SPI
+		device pci 1f.0 on
+			chip ec/google/chromeec
+				# We only have one init function that
+				# we need to call to initialize the
+				# keyboard part of the EC.
+				device pnp ff.1 on # dummy address
+				end
+			end
+		end # LPC Bridge
+		device pci 1f.3 off end # SMBus
+	end
+end
diff --git a/src/mainboard/google/rambi/variants/sumo/gpio.c b/src/mainboard/google/rambi/variants/sumo/gpio.c
new file mode 100644
index 0000000000..0856c29d24
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/gpio.c
@@ -0,0 +1,228 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdlib.h>
+#include <soc/gpio.h>
+#include <mainboard/google/rambi/irqroute.h>
+
+/* NCORE GPIOs */
+static const struct soc_gpio_map gpncore_gpio_map[] = {
+	GPIO_FUNC2,	/* S0_NC00 - INT_HDMI_HPD - INT */
+	GPIO_FUNC2,	/* S0_NC01 - HDMI_DDCDATA_SW */
+	GPIO_FUNC2,	/* S0_NC02 - HDMI_DDCCLK_SW */
+	GPIO_NC,	/* S0_NC03 - NC */
+	GPIO_NC,	/* S0_NC04 - NC */
+	GPIO_NC,	/* S0_NC05 - NC */
+	GPIO_FUNC2,	/* S0_NC06 - EDP_HPD_L */
+	GPIO_FUNC2,	/* S0_NC07 - DDI1_DDCDATA */
+	GPIO_FUNC2,	/* S0_NC08 - DDI1_DDCCLK */
+	GPIO_NC,	/* S0_NC09 - NC */
+	GPIO_FUNC2,	/* S0_NC10 - SOC_EDP_BLON_C */
+	GPIO_FUNC2,	/* S0_NC11 - SOC_DPST_PWM_C */
+	GPIO_NC,	/* S0_NC12 - NC */
+	GPIO_INPUT,	/* S0_NC13 - GPIO_NC13 - STRAP */
+	GPIO_NC,	/* S0_NC14 - NC */
+	GPIO_DEFAULT,	/* S0_NC15 - XDP_GPIO_S0_NC15 */
+	GPIO_DEFAULT,	/* S0_NC16 - XDP_GPIO_S0_NC16 */
+	GPIO_DEFAULT,	/* S0_NC17 - XDP_GPIO_S0_NC17 */
+	GPIO_DEFAULT,	/* S0_NC18 - XDP_GPIO_S0_NC18 */
+	GPIO_DEFAULT,	/* S0_NC19 - XDP_GPIO_S0_NC19 */
+	GPIO_DEFAULT,	/* S0_NC20 - XDP_GPIO_S0_NC20 */
+	GPIO_DEFAULT,	/* S0_NC21 - XDP_GPIO_S0_NC21 */
+	GPIO_DEFAULT,	/* S0_NC22 - XDP_GPIO_S0_NC22 */
+	GPIO_DEFAULT,	/* S0_NC23 - XDP_GPIO_S0_NC23 */
+	GPIO_NC,	/* S0_NC24 - NC */
+	GPIO_NC,	/* S0_NC25 - NC */
+	GPIO_NC,	/* S0_NC26 - NC */
+	GPIO_END
+};
+
+/* SCORE GPIOs */
+static const struct soc_gpio_map gpscore_gpio_map[] = {
+	GPIO_ACPI_SCI,	/* S0_SC000 - SOC_KBC_SCI - INT */
+	GPIO_NC,	/* S0_SC001 - NC */
+	GPIO_NC,	/* S0-SC002 - SATA_LED_R_N (NC/PU) */
+	GPIO_FUNC1,	/* S0-SC003 - PCIE_CLKREQ_IMAGE0# */
+	GPIO_NC,	/* S0-SC004 - NC# */
+	GPIO_FUNC1,	/* S0-SC005 - PCIE_CLKREQ_WLAN# */
+	GPIO_FUNC1,	/* S0-SC006 - PCIE_CLKREQ_LAN# */
+	GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */
+	GPIO_NC,	/* S0-SC008 - ACZ_RST# (NC) */
+	GPIO_NC,	/* S0-SC009 - ACZ_SYNC (NC) */
+	GPIO_NC,	/* S0-SC010 - ACZ_BCLK (NC) */
+	GPIO_NC,	/* S0-SC011 - ACZ_STDOUT (NC) */
+	GPIO_NC,	/* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */
+	GPIO_NC,	/* S0-SC013 - NC */
+	GPIO_INPUT,	/* S0-SC014 - DET_TRIGGER - INT */
+	GPIO_INPUT,	/* S0-SC015 - AJACK_MICPRES_L - INT */
+	GPIO_FUNC(3, PULL_DOWN, 20K),	/* S0-SC016 - MMC1_45_CLK  */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC017 - MMC1_45_D[0] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC018 - MMC1_45_D[1] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC019 - MMC1_45_D[2] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC020 - MMC1_45_D[3] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC021 - MMC1_45_D[4] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC022 - MMC1_45_D[5] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC023 - MMC1_45_D[6] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC024 - MMC1_45_D[7] */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC025 - MMC1_45_CMD  */
+	GPIO_FUNC(3, PULL_UP, 20K),	/* S0-SC026 - MMC1_45_RST  */
+	GPIO_NC,	/* S0-SC027 - NC */
+	GPIO_NC,	/* S0-SC028 - NC */
+	GPIO_NC,	/* S0-SC029 - NC */
+	GPIO_NC,	/* S0-SC030 - NC */
+	GPIO_NC,	/* S0-SC031 - NC */
+	GPIO_NC,	/* S0-SC032 - NC */
+	GPIO_FUNC(1, PULL_DOWN, 20K),	/* S0-SC033 - SD3_CLK */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC034 - SD3_D0 */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC035 - SD3_D1 */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC036 - SD3_D2 */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC037 - SD3_D3 */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC038 - SD3_CD# */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC039 - SD3_CMD */
+	GPIO_NC,	/* S0-SC040 - SDMMC3_1P8_EN - TP3 */
+	GPIO_FUNC(1, PULL_UP, 20K),	/* S0-SC041 - SDIO3_PWR_EN# */
+	GPIO_FUNC1,	/* S0-SC042 - LPC_LAD0 */
+	GPIO_FUNC1,	/* S0-SC043 - LPC-LAD1 */
+	GPIO_FUNC1,	/* S0-SC044 - LPC_LAD2 */
+	GPIO_FUNC1,	/* S0-SC045 - LPC_LAD3 */
+	GPIO_FUNC1,	/* S0-SC046 - LPC_LFRAME# */
+	GPIO_FUNC1,	/* S0-SC047 - PCLK_TPM */
+	GPIO_FUNC1,	/* S0-SC048 - CLK_PCI_EC */
+	GPIO_FUNC1,	/* S0-SC049 - LPC_CLKRUN_L */
+	GPIO_NC,	/* S0-SC050 - IRQ_SERIRQ */
+	GPIO_FUNC1,	/* S0-SC051 - SMB_SOC_DATA (XDP) */
+	GPIO_FUNC1,	/* S0-SC052 - SMB_SOC_CLK (XDP) */
+	GPIO_NC,	/* S0-SC053 - SMB_SOC_ALERTB (NC) */
+	GPIO_DEFAULT,	/* S0-SC054 - NC */
+	GPIO_NC,	/* S0-SC055 - NC */
+	GPIO_INPUT,	/* S0-SC056 - GPIO_S0_SC_56 - STRAP */
+	GPIO_FUNC1,	/* S0-SC057 - PCH_UART_TXD */
+	GPIO_INPUT,	/* S0-SC058 - SIM_DET_C */
+	GPIO_INPUT_LEGACY,	/* S0-SC059 - EC_IN_RW_C */
+	GPIO_NC,	/* S0-SC060 - NC */
+	GPIO_FUNC1,	/* S0-SC061 - SOC_UART_RX */
+	GPIO_FUNC1,	/* S0-SC062 - I2S_BCLK */
+	GPIO_FUNC1,	/* S0-SC063 - I2S_LRCLK */
+	GPIO_FUNC1,	/* S0-SC064 - I2S_DIN */
+	GPIO_FUNC1,	/* S0-SC065 - I2S_DOUT */
+	GPIO_FUNC1,	/* S0-SC066 - SIO_SPI_CS# */
+	GPIO_FUNC1,	/* S0-SC067 - SIO_SPI_MISO */
+	GPIO_FUNC1,	/* S0-SC068 - SIO_SPI_MOSI */
+	GPIO_FUNC1,	/* S0-SC069 - SIO_SPI_CLK */
+	GPIO_NC,	/* S0-SC070 - NC */
+	GPIO_NC,	/* S0-SC071 - NC */
+	GPIO_DIRQ,	/* S0-SC072 - TOUCH_INT_L_DX */
+	GPIO_NC,	/* S0-SC073 - NC */
+	GPIO_NC,	/* S0-SC074 - SIO_UART2_RXD (NC) */
+	GPIO_NC,	/* S0-SC075 - SIO_UART2_TXD (NC) */
+	GPIO_NC,	/* S0-SC076 - NC */
+	GPIO_NC,	/* S0-SC077 - NC */
+	GPIO_NC,	/* S0-SC078 - NC */
+	GPIO_NC,	/* S0-SC079 - NC */
+	GPIO_FUNC1,	/* S0-SC080 - I2C_1_SDA */
+	GPIO_FUNC1,	/* S0-SC081 - I2C_1_SCL */
+	GPIO_NC,	/* S0-SC082 - NC */
+	GPIO_NC,	/* S0-SC083 - NC */
+	GPIO_NC,	/* S0-SC084 - NC */
+	GPIO_NC,	/* S0-SC085 - NC */
+	GPIO_NC,	/* S0-SC086 - NC */
+	GPIO_NC,	/* S0-SC087 - NC */
+	GPIO_FUNC1,	/* S0-SC088 - I2C_5_SDA */
+	GPIO_FUNC1,	/* S0-SC089 - I2C_5_SCL */
+	GPIO_NC,	/* S0-SC090 - NC */
+	GPIO_NC,	/* S0-SC091 - NC */
+	GPIO_NC,	/* S0-SC092 - I2C_NGFF_SDA (NC/PU) */
+	GPIO_NC,	/* S0-SC093 - I2C_NGFF_SCL (NC/PU) */
+	GPIO_NC,	/* S0-SC094 - NC */
+	GPIO_NC,	/* S0-SC095 - SIO_PWM1 (NC) */
+	GPIO_FUNC1,	/* S0-SC096 - I2S_MCLK */
+	GPIO_NC,	/* S0-SC097 - NC */
+	GPIO_NC,	/* S0-SC098 - NC */
+	GPIO_NC,	/* S0-SC099 - NC */
+	GPIO_NC,	/* S0-SC100 - NC */
+	GPIO_DIRQ,	/* S0-SC101 - KBD_IRQ# */
+	GPIO_END
+};
+
+/* SSUS GPIOs */
+static const struct soc_gpio_map gpssus_gpio_map[] = {
+	GPIO_ACPI_WAKE,	/* S500 - PCH_WAKE# */
+	GPIO_NC,	/* S501 - NC */
+	GPIO_ACPI_WAKE,	/* S502 - TOUCH_INT# - INT */
+	GPIO_FUNC6,	/* S503 - LTE_WAKE_L# - INT */
+	GPIO_NC,	/* S504 - SOC_JTAG2_TDO (NC/PU) */
+	GPIO_FUNC1,	/* S505 - SUS_CLK_WLAN (NC) */
+	GPIO_INPUT_PU,	/* S506 - PCH_SPI_WP */
+	GPIO_ACPI_SMI,	/* S507 - SOC_KBC_SMI - INT */
+	GPIO_INPUT,	/* S508 - SOC_RECOVER- */
+	GPIO_DIRQ,	/* S509 - MUX_AUD_INT1# */
+	GPIO_OUT_HIGH,	/* S510 - WIFI_DISABLE_L */
+	GPIO_FUNC0,	/* S511 - SUSPWRDNACK */
+	GPIO_FUNC0,	/* S512 - WIFI_SUSCLK */
+	GPIO_FUNC0,	/* S513 - SLP_SX */
+	GPIO_NC,	/* S514 - NC */
+	GPIO_FUNC0,	/* S515 - WLAN_WAKE_L - INT */
+	GPIO_FUNC0,	/* S516 - PCH_PWRBTN_L */
+	GPIO_NC,	/* S517 - NC */
+	GPIO_FUNC0,	/* S518 - SUS_STAT# */
+	GPIO_FUNC0,	/* S519 - USB_OC0# */
+	GPIO_FUNC0,	/* S520 - USB_OC1# */
+	GPIO_NC,	/* S521 - NC */
+	GPIO_NC,	/* S522 - XDP_GPIO_DFX0 */
+	GPIO_NC,	/* S523 - XDP_GPIO_DFX1 */
+	GPIO_NC,	/* S524 - XDP_GPIO_DFX2 */
+	GPIO_NC,	/* S525 - XDP_GPIO_DFX3 */
+	GPIO_NC,	/* S526 - XDP_GPIO_DFX4 */
+	GPIO_NC,	/* S527 - XDP_GPIO_DFX5 */
+	GPIO_NC,	/* S528 - XDP_GPIO_DFX6 */
+	GPIO_NC,	/* S529 - XDP_GPIO_DFX7 */
+	GPIO_NC,	/* S530 - XDP_GPIO_DFX8 */
+	GPIO_NC,	/* S531 - NC */
+	GPIO_NC,	/* S532 - NC */
+	GPIO_NC,	/* S533 - NC */
+	GPIO_NC,	/* S534 - NC */
+	GPIO_OUT_HIGH,	/* S535 - LTE_DISABLE_L */
+	GPIO_NC,	/* S536 - NC */
+	GPIO_INPUT,	/* S537 - RAM_ID0 */
+	GPIO_INPUT,	/* S538 - RAM_ID1 */
+	GPIO_INPUT,	/* S539 - RAM_ID2 */
+	GPIO_NC,	/* S540 - NC */
+	GPIO_NC,	/* S541 - NC */
+	GPIO_NC,	/* S542 - NC */
+	GPIO_NC,	/* S543 - NC */
+	GPIO_END
+};
+
+static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = {
+	[TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO,
+	[I8042_IRQ_OFFSET] = I8042_IRQ_GPIO,
+};
+
+static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = {
+	[CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO,
+};
+
+static struct soc_gpio_config gpio_config = {
+	.ncore = gpncore_gpio_map,
+	.score = gpscore_gpio_map,
+	.ssus  = gpssus_gpio_map,
+	.core_dirq = &core_dedicated_irq,
+	.sus_dirq = &sus_dedicated_irq,
+};
+
+struct soc_gpio_config* mainboard_get_gpios(void)
+{
+	return &gpio_config;
+}
diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/dptf.asl
new file mode 100644
index 0000000000..3530d7bc6d
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/dptf.asl
@@ -0,0 +1,42 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE	80
+#define DPTF_CPU_CRITICAL	90
+
+#define DPTF_TSR0_SENSOR_ID	1
+#define DPTF_TSR0_SENSOR_NAME	"TMP432_Internal"
+#define DPTF_TSR0_PASSIVE	48
+#define DPTF_TSR0_CRITICAL	70
+
+#define DPTF_TSR1_SENSOR_ID	2
+#define DPTF_TSR1_SENSOR_NAME	"TMP432_Power_top"
+#define DPTF_TSR1_PASSIVE	60
+#define DPTF_TSR1_CRITICAL	70
+
+#define DPTF_TSR2_SENSOR_ID	3
+#define DPTF_TSR2_SENSOR_NAME	"TMP432_CPU_bottom"
+#define DPTF_TSR2_PASSIVE	55
+#define DPTF_TSR2_CRITICAL	70
+
+#define DPTF_ENABLE_CHARGER
+
+/* Charger performance states, board-specific values from charger and EC */
+Name (CHPS, Package () {
+	Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 },	/* 1.7A (MAX) */
+	Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 },	/* 1.5A */
+	Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 },	/* 1.0A */
+	Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 },	/* 0.5A */
+	Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 },	/* 0.128A */
+})
diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/mainboard.asl
new file mode 100644
index 0000000000..e7f06ee2b7
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/mainboard.asl
@@ -0,0 +1,16 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* WDT touchscreen */
+#include <mainboard/google/rambi/acpi/touchscreen_wdt.asl>
diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/onboard.h b/src/mainboard/google/rambi/variants/sumo/include/variant/onboard.h
new file mode 100644
index 0000000000..1fb268aa9b
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/include/variant/onboard.h
@@ -0,0 +1,47 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ONBOARD_H
+#define ONBOARD_H
+
+#include <mainboard/google/rambi/irqroute.h>
+
+#ifndef __ACPI__
+void lan_init(void);
+#endif
+
+/* defines for programming the MAC address */
+#define SUMO_NIC_VENDOR_ID		0x10EC
+#define SUMO_NIC_DEVICE_ID		0x8168
+
+/* 0x00: White LINK LED and Amber ACTIVE LED */
+#define SUMO_NIC_LED_MODE		0x00
+
+/* PCH wake signal from EC. */
+#define BOARD_PCH_WAKE_GPIO             ACPI_ENABLE_WAKE_SUS_GPIO(0)
+
+#define BOARD_TOUCHSCREEN_NAME          "touchscreen"
+#define BOARD_TOUCHSCREEN_IRQ           GPIO_S0_DED_IRQ(TOUCH_IRQ_OFFSET)
+#define BOARD_TOUCHSCREEN_WAKE_GPIO     ACPI_ENABLE_WAKE_SUS_GPIO(2)
+#define BOARD_TOUCHSCREEN_I2C_BUS       5
+#define BOARD_TOUCHSCREEN_I2C_ADDR      0x2c
+
+#define BOARD_I8042_IRQ                 GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET)
+#define BOARD_CODEC_IRQ                 GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET)
+
+/* Disable PS2 keyboard */
+#undef SIO_EC_ENABLE_PS2K
+
+#endif
diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/variant.h b/src/mainboard/google/rambi/variants/sumo/include/variant/variant.h
new file mode 100644
index 0000000000..8d2113c063
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/include/variant/variant.h
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VARIANT_H
+#define VARIANT_H
+
+/*
+ * RAM_ID[2:0] are on GPIO_SSUS[39:37]
+ * 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz
+ * 0b001 - 4GiB total - 2 x 2GiB Hynix  H5TC4G63AFR-PBA 1600MHz
+ * 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz
+ * 0b011 - 2GiB total - 2 x 1GiB Hynix  H5TC2G63FFR-PBA 1600MHz
+ * 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz
+ * 0b101 - 2GiB total - 1 x 2GiB Hynix  H5TC4G63AFR-PBA 1600MHz
+ * 0b110 - 4GiB total - 2 x 2GiB Hynix  H5TC4G63CFR-PBA 1600MHz
+ * 0b111 - 2GiB total - 1 x 2GiB Hynix  H5TC4G63CFR-PBA 1600MHz
+ */
+
+static const uint32_t dual_channel_config =
+	(1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 6);
+
+#define SPD_SIZE 256
+#define GPIO_SSUS_37_PAD 57
+#define GPIO_SSUS_38_PAD 50
+#define GPIO_SSUS_39_PAD 58
+
+#endif
diff --git a/src/mainboard/google/rambi/variants/sumo/lan.c b/src/mainboard/google/rambi/variants/sumo/lan.c
new file mode 100644
index 0000000000..07fe3d96b0
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/sumo/lan.c
@@ -0,0 +1,191 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <cbfs.h>
+#include <string.h>
+#include <types.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <fmap.h>
+#include <variant/onboard.h>
+
+static unsigned int search(char *p, u8 *a, unsigned int lengthp,
+			   unsigned int lengtha)
+{
+	int i, j;
+
+	/* Searching */
+	for (j = 0; j <= lengtha - lengthp; j++) {
+		for (i = 0; i < lengthp && p[i] == a[i + j]; i++)
+			;
+		if (i >= lengthp)
+			return j;
+	}
+	return lengtha;
+}
+
+static unsigned char get_hex_digit(u8 *offset)
+{
+	unsigned char retval = 0;
+
+	retval = *offset - '0';
+	if (retval > 0x09) {
+		retval = *offset - 'A' + 0x0A;
+		if (retval > 0x0F)
+			retval = *offset - 'a' + 0x0a;
+	}
+	if (retval > 0x0F) {
+		printk(BIOS_DEBUG, "Error: Invalid Hex digit found: %c - 0x%02x\n",
+			*offset, *offset);
+		retval = 0;
+	}
+
+	return retval;
+}
+
+static int get_mac_address(u32 *high_dword, u32 *low_dword,
+			   u8 *search_address, u32 search_length)
+{
+	char key[] = "ethernet_mac";
+	unsigned int offset;
+	int i;
+
+	offset = search(key, search_address, sizeof(key) - 1, search_length);
+	if (offset == search_length) {
+		printk(BIOS_DEBUG,
+		       "Error: Could not locate '%s' in VPD\n", key);
+		return 0;
+	}
+	printk(BIOS_DEBUG, "Located '%s' in VPD\n", key);
+
+	offset += sizeof(key);	/* move to next character */
+	*high_dword = 0;
+
+	/* Fetch the MAC address and put the octets in the correct order to
+	 * be programmed.
+	 *
+	 * From RTL8105E_Series_EEPROM-Less_App_Note_1.1
+	 * If the MAC address is 001122334455h:
+	 * Write 33221100h to I/O register offset 0x00 via double word access
+	 * Write 00005544h to I/O register offset 0x04 via double word access
+	 */
+
+	for (i = 0; i < 4; i++) {
+		*high_dword |= (get_hex_digit(search_address + offset)
+				<< (4 + (i * 8)));
+		*high_dword |= (get_hex_digit(search_address + offset + 1)
+				<< (i * 8));
+		offset += 3;
+	}
+
+	*low_dword = 0;
+	for (i = 0; i < 2; i++) {
+		*low_dword |= (get_hex_digit(search_address + offset)
+			       << (4 + (i * 8)));
+		*low_dword |= (get_hex_digit(search_address + offset + 1)
+			       << (i * 8));
+		offset += 3;
+	}
+
+	return *high_dword | *low_dword;
+}
+
+static void program_mac_address(u16 io_base)
+{
+	void *search_address = NULL;
+	size_t search_length = -1;
+
+	/* Default MAC Address of A0:00:BA:D0:0B:AD */
+	u32 high_dword = 0xD0BA00A0;	/* high dword of mac address */
+	u32 low_dword = 0x0000AD0B;	/* low word of mac address as a dword */
+
+	if (IS_ENABLED(CONFIG_CHROMEOS)) {
+		struct region_device rdev;
+
+		if (fmap_locate_area_as_rdev("RO_VPD", &rdev) == 0) {
+			search_address = rdev_mmap_full(&rdev);
+
+			if (search_address != NULL)
+				search_length = region_device_sz(&rdev);
+		}
+	} else {
+		search_address = cbfs_boot_map_with_leak("vpd.bin",
+							CBFS_TYPE_RAW,
+							&search_length);
+	}
+
+	if (search_address == NULL)
+		printk(BIOS_ERR, "LAN: VPD not found.\n");
+	else
+		get_mac_address(&high_dword, &low_dword, search_address,
+				search_length);
+
+	if (io_base) {
+		printk(BIOS_DEBUG, "Realtek NIC io_base = 0x%04x\n", io_base);
+		printk(BIOS_DEBUG, "Programming MAC Address\n");
+
+		/* Disable register protection */
+		outb(0xc0, io_base + 0x50);
+		outl(high_dword, io_base);
+		outl(low_dword, io_base + 0x04);
+		outb(0x60, io_base + 54);
+		/* Enable register protection again */
+		outb(0x00, io_base + 0x50);
+	}
+}
+
+void lan_init(void)
+{
+	u16 io_base = 0;
+	struct device *ethernet_dev = NULL;
+
+	/* Get NIC's IO base address */
+	ethernet_dev = dev_find_device(SUMO_NIC_VENDOR_ID,
+				       SUMO_NIC_DEVICE_ID, 0);
+	if (ethernet_dev != NULL) {
+		io_base = pci_read_config16(ethernet_dev, 0x10) & 0xfffe;
+
+		/*
+		 * Battery life time - LAN PCIe should enter ASPM L1 to save
+		 * power when LAN connection is idle.
+		 * enable CLKREQ: LAN pci config space 0x81h=01
+		 */
+		pci_write_config8(ethernet_dev, 0x81, 0x01);
+	}
+
+	if (io_base) {
+		/* Program MAC address based on VPD data */
+		program_mac_address(io_base);
+
+		/*
+		 * Program NIC LEDS
+		 *
+		 * RTL8105E Series EEPROM-Less Application Note,
+		 * Section 5.6 LED Mode Configuration
+		 *
+		 * Step1: Write C0h to I/O register 0x50 via byte access to
+		 *        disable 'register protection'
+		 * Step2: Write xx001111b to I/O register 0x52 via byte access
+		 *        (bit7 is LEDS1 and bit6 is LEDS0)
+		 * Step3: Write 0x00 to I/O register 0x50 via byte access to
+		 *        enable 'register protection'
+		 */
+		outb(0xc0, io_base + 0x50);	/* Disable protection */
+		outb((SUMO_NIC_LED_MODE << 6) | 0x0f, io_base + 0x52);
+		outb(0x00, io_base + 0x50);	/* Enable register protection */
+	}
+}