mb/google/rambi: Convert to use override devicetree

Since the variants' devicetrees are almost identical, convert to
using an overridetree setup for simplicity.

Change-Id: I52b71cf12a4e0b67135cfb106c3e89b00205d3bc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39996
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

2 files changed, 6 insertions, 101 deletions

diff --git a/src/mainboard/google/rambi/variants/squawks/devicetree.cb b/src/mainboard/google/rambi/variants/squawks/devicetree.cb
deleted file mode 100644
index 4ed27be478..0000000000
--- a/src/mainboard/google/rambi/variants/squawks/devicetree.cb
+++ /dev/null
@@ -1,101 +0,0 @@
-chip soc/intel/baytrail
-
-	# SATA port enable mask (2 ports)
-	register "sata_port_map" = "0x1"
-	register "sata_ahci" = "0x1"
-	register "ide_legacy_combined" = "0x0"
-
-	# Route USB ports to XHCI
-	register "usb_route_to_xhci" = "1"
-
-	# USB Port Disable Mask
-	register "usb2_port_disable_mask" = "0x0"
-	register "usb3_port_disable_mask" = "0x0"
-
-	# USB PHY settings
-	# TODO: These values are from Baytrail and need tuned for Squawks board
-	register "usb2_per_port_lane0" = "0x00049a09"
-	register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d"
-	register "usb2_per_port_lane1" = "0x00049a09"
-	register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d"
-	register "usb2_per_port_lane2" = "0x00049209"
-	register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015"
-	register "usb2_per_port_lane3" = "0x00049a09"
-	register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d"
-
-	# LPE audio codec settings
-	register "lpe_codec_clk_freq" = "25" # 25MHz clock
-	register "lpe_codec_clk_num" = "0"   # PMC_PLT_CLK[0]
-
-	# SD Card controller
-	register "sdcard_cap_low" = "0x036864b2"
-	register "sdcard_cap_high" = "0x0"
-
-	# Enable devices in ACPI mode
-	register "lpe_acpi_mode" = "1"
-	register "lpss_acpi_mode" = "1"
-	register "scc_acpi_mode" = "1"
-
-	# Enable PIPEA as DP_C
-	register "gpu_pipea_port_select" = "2"		# DP_C
-	register "gpu_pipea_power_cycle_delay" = "6"	# 600ms
-	register "gpu_pipea_power_on_delay" = "5000"	# 500ms
-	register "gpu_pipea_light_on_delay" = "70"	# 7ms
-	register "gpu_pipea_power_off_delay" = "500"	# 50ms
-	register "gpu_pipea_light_off_delay" = "2000"	# 200ms
-
-	# VR PS2 control
-	register "vnn_ps2_enable" = "1"
-	register "vcc_ps2_enable" = "1"
-
-	# Disable SLP_X stretching after SUS power well fail.
-	register "disable_slp_x_stretch_sus_fail" = "1"
-
-	device cpu_cluster 0 on
-		device lapic 0 on end
-	end
-	device domain 0 on
-		device pci 00.0 on  end # SoC router
-		device pci 02.0 on  end # GFX
-		device pci 11.0 off end # SDIO
-		device pci 12.0 on  end # SD
-		device pci 13.0 on  end # SATA
-		device pci 14.0 on  end # XHCI
-		device pci 15.0 on  end # LPE
-		device pci 17.0 on  end # MMC
-		device pci 18.0 on  end # SIO_DMA1
-		device pci 18.1 on  end # I2C1
-		device pci 18.2 on  end # I2C2
-		device pci 18.3 off end # I2C3
-		device pci 18.4 off end # I2C4
-		device pci 18.5 off end # I2C5
-		device pci 18.6 off end # I2C6
-		device pci 18.7 off end # I2C7
-		device pci 1a.0 off end # TXE
-		device pci 1b.0 on  end # HDA
-		device pci 1c.0 on  end # PCIE_PORT1
-		device pci 1c.1 on  end # PCIE_PORT2
-		device pci 1c.2 off end # PCIE_PORT3
-		device pci 1c.3 off end # PCIE_PORT4
-		device pci 1d.0 on  end # EHCI
-		device pci 1e.0 on  end # SIO_DMA2
-		device pci 1e.1 off end # PWM1
-		device pci 1e.2 off end # PWM2
-		device pci 1e.3 off end # HSUART1
-		device pci 1e.4 off end # HSUART2
-		device pci 1e.5 off end # SPI
-		device pci 1f.0 on
-			chip drivers/pc80/tpm
-				device pnp 0c31.0 on end
-			end
-			chip ec/google/chromeec
-				# We only have one init function that
-				# we need to call to initialize the
-				# keyboard part of the EC.
-				device pnp ff.1 on # dummy address
-				end
-			end
-		end # LPC Bridge
-		device pci 1f.3 off end # SMBus
-	end
-end
diff --git a/src/mainboard/google/rambi/variants/squawks/overridetree.cb b/src/mainboard/google/rambi/variants/squawks/overridetree.cb
new file mode 100644
index 0000000000..76bcf92a21
--- /dev/null
+++ b/src/mainboard/google/rambi/variants/squawks/overridetree.cb
@@ -0,0 +1,6 @@
+chip soc/intel/baytrail
+
+	device domain 0 on
+		device pci 1c.1 on  end # PCIE_PORT2
+	end
+end