mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboard

This change updates the configuration of GPIO_178 to be active low as
per latest revision on different octopus variants. This effectively:
1. Gets rid of early_gpio_table in different variants -- phaser, meep,
fleex, bobba.
2. Deprecates board id < 2 for bobba, board id < 1 for fleex and
phaser.
3. Adds special early_gpio_table in yorp which has GPIO_178 as an
active high signal.

BUG=b:119885949

Change-Id: I024199a8f1f96db57f8fa60c4d265789cd3a0493
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/29784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>

1 files changed, 0 insertions, 45 deletions

diff --git a/src/mainboard/google/octopus/variants/bobba/gpio.c b/src/mainboard/google/octopus/variants/bobba/gpio.c
index 6b471e5061..1b5c0bb069 100644
--- a/src/mainboard/google/octopus/variants/bobba/gpio.c
+++ b/src/mainboard/google/octopus/variants/bobba/gpio.c
@@ -49,48 +49,3 @@ const struct pad_config *variant_override_gpio_table(size_t *num)
 	}
 	return c;
 }
-
-/* GPIOs needed prior to ramstage. */
-static const struct pad_config early_gpio_table[] = {
-	/* PCH_WP_OD */
-	PAD_CFG_GPI(GPIO_190, NONE, DEEP),
-	/* H1_PCH_INT_ODL */
-	PAD_CFG_GPI_APIC_IOS(GPIO_63, NONE, DEEP, LEVEL, INVERT, TxDRxE,
-			     DISPUPD),
-	/* H1_SLAVE_SPI_CLK_R */
-	PAD_CFG_NF(GPIO_79, NONE, DEEP, NF1),
-	/* H1_SLAVE_SPI_CS_L_R */
-	PAD_CFG_NF(GPIO_80, NONE, DEEP, NF1),
-	/* H1_SLAVE_SPI_MISO */
-	PAD_CFG_NF(GPIO_82, NONE, DEEP, NF1),
-	/* H1_SLAVE_SPI_MOSI_R */
-	PAD_CFG_NF(GPIO_83, NONE, DEEP, NF1),
-
-	/* WLAN_PE_RST */
-	PAD_CFG_GPO(GPIO_164, 0, DEEP),
-
-	/*
-	 * ESPI_IO1 acts as ALERT# (which is open-drain) and requies a weak
-	 * pull-up for proper operation. Since there is no external pull present
-	 * on this platform, configure an internal weak pull-up.
-	 */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_151, UP_20K, DEEP, NF2, HIZCRx1,
-				    ENPU),
-};
-
-const struct pad_config *variant_early_gpio_table(size_t *num)
-{
-	/*
-	 * This is a hack to configure EN_PP3300_WLAN based on board id. Once
-	 * board id 0/1 is deprecated, we can get rid of this.
-	 */
-	uint32_t bid = board_id();
-
-	if (bid == UNDEFINED_STRAPPING_ID || bid < 2)
-		gpio_output(GPIO_178, 1);
-	else
-		gpio_output(GPIO_178, 0);
-
-	*num = ARRAY_SIZE(early_gpio_table);
-	return early_gpio_table;
-}