diff options
| author | Tim Wawrzynczak <twawrzynczak@chromium.org> | 2019-08-07 11:08:07 -0600 |
|---|---|---|
| committer | Shelley Chen <shchen@google.com> | 2019-08-07 18:16:11 +0000 |
| commit | 69254494a0b03d870ab925f0a474c6077a358229 (patch) | |
| tree | 7492e3c75f501167d96606166340bbe7eb604a76 /src/mainboard/google/hatch/variants | |
| parent | 042e46f6c845dd64adf781cd254fd5a899688677 (diff) | |
mb/google/hatch: Kohaku: Add touchscreen controller to device tree
The touchscreen controller was never added to the device tree, and the
next board rev will have this IC connected. Set it up in the device tree
with conservative power resource timings from the datasheet.
BUG=b:138869702
BRANCH=none
TEST=compiles; current board rev does not have touch IC
Change-Id: I759fb32f31c8eee0e6bd664c6a82308354ef5d08
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/mainboard/google/hatch/variants')
| -rw-r--r-- | src/mainboard/google/hatch/variants/kohaku/gpio.c | 4 | ||||
| -rw-r--r-- | src/mainboard/google/hatch/variants/kohaku/overridetree.cb | 15 |
2 files changed, 19 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/kohaku/gpio.c b/src/mainboard/google/hatch/variants/kohaku/gpio.c index d22de04648..bc9df38ab5 100644 --- a/src/mainboard/google/hatch/variants/kohaku/gpio.c +++ b/src/mainboard/google/hatch/variants/kohaku/gpio.c @@ -41,10 +41,14 @@ static const struct pad_config gpio_table[] = { PAD_NC(GPP_C1, NONE), /* C7 : PEN_IRQ_OD_L */ PAD_CFG_GPI_APIC(GPP_C7, NONE, PLTRST, LEVEL, INVERT), + /* C12 : EN_PP3300_TSP_DX */ + PAD_CFG_GPO(GPP_C12, 0, DEEP), /* C15 : EN_PP3300_DIG_DX */ PAD_CFG_GPO(GPP_C15, 0, DEEP), /* C23 : UART2_CTS# ==> NC */ PAD_NC(GPP_C23, NONE), + /* D16 : TOUCHSCREEN_INT_L */ + PAD_CFG_GPI_APIC(GPP_D16, NONE, PLTRST, LEVEL, INVERT), /* E23 : GPP_E23 ==> NC */ PAD_NC(GPP_E23, NONE), /* F1 : GPP_F1 ==> NC */ diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb index 8a1de845a7..57429ad0b8 100644 --- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb @@ -81,6 +81,21 @@ chip soc/intel/cannonlake end end # I2C 0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ATML0001"" + register "desc" = ""Atmel Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" + register "reset_delay_ms" = "91" # 90.5 ms + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C12)" + register "enable_delay_ms" = "1" # 90 ns + register "has_power_resource" = "1" + register "disable_gpio_export_in_crs" = "1" + device i2c 4b on end + end + end # I2C #1 + device pci 15.2 on chip drivers/i2c/hid register "generic.hid" = ""WCOM50C1"" |