diff options
| author | Matt DeVillier <matt.devillier@gmail.com> | 2022-12-18 18:47:20 -0600 |
|---|---|---|
| committer | Martin L Roth <gaumless@gmail.com> | 2022-12-23 00:22:03 +0000 |
| commit | 251d443e8b3dd27df9ee5070b7a4926fe1e07dad (patch) | |
| tree | 99508bc9e7b69cb6e8b45cf209d5635babd23785 /src/mainboard/google/hatch/variants/mushu | |
| parent | 4534ed7a628f1a42a1ecb4fa056099704abcc7d5 (diff) | |
mb/google/hatch: Set touchpad/screen IRQs to LEVEL vs EDGE
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I580348d0aabb24f0241d6e9992c5a17942bd57ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Diffstat (limited to 'src/mainboard/google/hatch/variants/mushu')
| -rw-r--r-- | src/mainboard/google/hatch/variants/mushu/overridetree.cb | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/src/mainboard/google/hatch/variants/mushu/overridetree.cb b/src/mainboard/google/hatch/variants/mushu/overridetree.cb index 48a7eadae3..04721c6d1f 100644 --- a/src/mainboard/google/hatch/variants/mushu/overridetree.cb +++ b/src/mainboard/google/hatch/variants/mushu/overridetree.cb @@ -95,7 +95,7 @@ chip soc/intel/cannonlake chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A21_IRQ)" register "wake" = "GPE0_DW0_21" device i2c 15 on end end @@ -104,7 +104,7 @@ chip soc/intel/cannonlake chip drivers/i2c/generic register "hid" = ""ELAN0001"" register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D16_IRQ)" register "probed" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" register "reset_delay_ms" = "100" |