diff options
| author | Michael Niewöhner <foss@mniewoehner.de> | 2020-12-21 03:46:58 +0100 |
|---|---|---|
| committer | Michael Niewöhner <foss@mniewoehner.de> | 2021-01-21 17:52:06 +0000 |
| commit | 3a2d4000cefe2f054a4ad53f95e06e6cbc86b5fc (patch) | |
| tree | f577ae900e99147762eada674287b1780e125686 /src/mainboard/google/hatch/variants/akemi/gpio.c | |
| parent | 1b77a487d6161053c36b5eeade3775b6858fb6ab (diff) | |
mb/google/hatch: do UART pad configuration at board-level
UART pad configuration should not be done in common code, because that
may cause short circuits, when the user sets a wrong UART index. Thus,
add the corresponding pads to the early UART gpio table for the board as
a first step. Common UART pad config code then gets dropped in CB:48829.
Also switch to `bootblock_mainboard_early_init` to configure the pads in
early bootblock before console initialization, to make the console work
as early as possible. The board does not do any other gpio configuration
in bootblock, so this should not influence behaviour in a negative way
(e.g. breaking overrides).
Change-Id: I62ffbe36bd7b7675aa0f41a8c6e9214d04ad4ae5
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49428
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google/hatch/variants/akemi/gpio.c')
| -rw-r--r-- | src/mainboard/google/hatch/variants/akemi/gpio.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/akemi/gpio.c b/src/mainboard/google/hatch/variants/akemi/gpio.c index 7694b0c930..b08f062186 100644 --- a/src/mainboard/google/hatch/variants/akemi/gpio.c +++ b/src/mainboard/google/hatch/variants/akemi/gpio.c @@ -152,6 +152,10 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), /* B18 : H1_SLAVE_SPI_MOSI_R */ PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C8 : UART_PCH_RX_DEBUG_TX */ + PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), + /* C9 : UART_PCH_TX_DEBUG_RX */ + PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* C14 : BT_DISABLE_L */ PAD_CFG_GPO(GPP_C14, 0, DEEP), /* PCH_WP_OD */ |