mb/google/drallion: Add two variants - arcada_cml & sarien_cml

These variants are to support the sarien and arcada boards
with CML SOC, the drallion variant will be used to support the
upcoming drallion board.

Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: I766bdccb6f8b6924d6ae1abbe57035f4ff1f6f17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>

9 files changed, 1109 insertions, 0 deletions

diff --git a/src/mainboard/google/drallion/variants/arcada_cml/Makefile.inc b/src/mainboard/google/drallion/variants/arcada_cml/Makefile.inc
new file mode 100644
index 0000000000..2bf028eb1f
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/Makefile.inc
@@ -0,0 +1,19 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2018 Google LLC
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+
+bootblock-y += gpio.c
+ramstage-y += gpio.c
+romstage-y += gpio.c
+verstage-y += gpio.c
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/devicetree.cb b/src/mainboard/google/drallion/variants/arcada_cml/devicetree.cb
new file mode 100644
index 0000000000..fe3b6c9cb1
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/devicetree.cb
@@ -0,0 +1,392 @@
+chip soc/intel/cannonlake
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route. i.e. If this route changes then the affected GPE
+	# offset bits also need to be changed.
+	register "gpe0_dw0" = "PMC_GPP_A"
+	register "gpe0_dw1" = "PMC_GPP_C"
+	register "gpe0_dw2" = "PMC_GPP_D"
+
+	# EC host command ranges
+	register "gen1_dec" = "0x00040931" # 0x930-0x937
+	register "gen2_dec" = "0x00040941" # 0x940-0x947
+	register "gen3_dec" = "0x000c0951" # 0x950-0x95f
+
+	# FSP configuration
+	register "SaGv" = "SaGv_Enabled"
+	register "HeciEnabled" = "0"
+	register "SataSalpSupport" = "1"
+	register "SataMode" = "Sata_AHCI"
+	register "SataPortsEnable[2]" = "1"
+	register "SataPortsDevSlp[2]" = "1"
+	register "InternalGfx" = "1"
+	register "SkipExtGfxScan" = "1"
+	register "PchPmSlpS3MinAssert" = "3"  # 50ms
+	register "PchPmSlpS4MinAssert" = "4"  # 4s
+	register "PchPmSlpSusMinAssert" = "4" # 4s
+	register "PchPmSlpAMinAssert" = "4"   # 2s
+	register "PchUnlockGpioPads" = "1"
+
+	register "speed_shift_enable" = "1"
+	register "psys_pmax" = "140"
+	register "s0ix_enable" = "1"
+	register "dptf_enable" = "1"
+	register "dmipwroptimize" = "1"
+	register "satapwroptimize" = "1"
+	register "tdp_pl1_override" = "25"
+	register "tdp_pl2_override" = "51"
+	register "Device4Enable" = "1"
+	register "AcousticNoiseMitigation" = "1"
+	register "SlowSlewRateForIa" = "2"
+	register "SlowSlewRateForGt" = "2"
+	register "SlowSlewRateForSa" = "0"
+	register "SlowSlewRateForFivr" = "2"
+	# Enable eDP device
+	register "DdiPortEdp" = "1"
+	# Enable HPD for DDI ports B/C
+	register "DdiPortBHpd" = "1"
+	register "DdiPortCHpd" = "1"
+	# Enable DDC for DDI port B
+	register "DdiPortBDdc" = "1"
+
+	# VR Settings Configuration for 4 Domains
+	#+----------------+-------+-------+-------+-------+
+	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
+	#+----------------+-------+-------+-------+-------+
+	#| Psi1Threshold  | 20A   | 20A   | 20A   | 20A   |
+	#| Psi2Threshold  | 5A    | 5A    | 5A    | 5A    |
+	#| Psi3Threshold  | 1A    | 1A    | 1A    | 1A    |
+	#| Psi3Enable     | 1     | 1     | 1     | 1     |
+	#| Psi4Enable     | 1     | 1     | 1     | 1     |
+	#| ImonSlope      | 0     | 0     | 0     | 0     |
+	#| ImonOffset     | 0     | 0     | 0     | 0     |
+	#| IccMax         | 6A    | 70A   | 31A   | 31A   |
+	#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
+	#| AcLoadline     | 10.3  | 1.8   | 3.1   | 3.1   |
+	#| DcLoadline     | 10.3  | 1.8   | 3.1   | 3.1   |
+	#+----------------+-------+-------+-------+-------+
+	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = VR_CFG_AMP(6),
+		.voltage_limit = 1520,
+		.ac_loadline = 1030,
+		.dc_loadline = 1030,
+	}"
+
+	register "domain_vr_config[VR_IA_CORE]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = VR_CFG_AMP(70),
+		.voltage_limit = 1520,
+		.ac_loadline = 180,
+		.dc_loadline = 180,
+	}"
+
+	register "domain_vr_config[VR_GT_UNSLICED]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = VR_CFG_AMP(31),
+		.voltage_limit = 1520,
+		.ac_loadline = 310,
+		.dc_loadline = 310,
+	}"
+
+	register "domain_vr_config[VR_GT_SLICED]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = VR_CFG_AMP(31),
+		.voltage_limit = 1520,
+		.ac_loadline = 310,
+		.dc_loadline = 310,
+	}"
+
+	# Intel Common SoC Config
+	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)"	# Left Type-C Port
+	register "usb2_ports[1]" = "USB2_PORT_LONG(OC0)"	# Left Type-A Port
+	register "usb2_ports[2]" = "USB2_PORT_LONG(OC1)"	# Right Type-A Port
+	register "usb2_ports[3]" = "USB2_PORT_EMPTY"
+	register "usb2_ports[4]" = "USB2_PORT_EMPTY"
+	register "usb2_ports[5]" = "USB2_PORT_LONG(OC_SKIP)"	# Camera
+	register "usb2_ports[6]" = "{
+		.enable        = 1, \
+		.ocpin         = OC_SKIP, \
+		.tx_bias       = USB2_BIAS_0MV, \
+		.tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \
+		.pre_emp_bias  = USB2_BIAS_28P15MV, \
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP, \
+		}"	# WWAN
+	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"	# USH
+	register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)"	# Fingerprint
+	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth
+
+	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# Left Type-C Port
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"	# Left Type-A Port
+	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)"	# Right Type-A Port
+	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# WWAN
+	register "usb3_ports[4]" = "USB3_PORT_EMPTY"
+	register "usb3_ports[5]" = "USB3_PORT_EMPTY"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| chipset_lockdown  | CHIPSET_LOCKDOWN_COREBOOT |
+	#| I2C0              | Touchscreen               |
+	#| I2C1              | Touchpad                  |
+	#| I2C4              | H1 TPM                    |
+	#+-------------------+---------------------------+
+
+	register "tcc_offset" = "1"
+
+	# PCH Thermal Trip Temperature in deg C
+	register "common_soc_config.pch_thermal_trip" = "77"
+
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 52,
+			.fall_time_ns = 110,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 52,
+			.fall_time_ns = 110,
+			.data_hold_time_ns = 330,
+		},
+		.i2c[4] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 36,
+			.fall_time_ns = 99,
+		},
+	}"
+
+	# PCIe port 10 for M.2 2230 WLAN
+	register "PcieRpEnable[9]" = "1"
+	register "PcieClkSrcUsage[2]" = "9"
+	register "PcieClkSrcClkReq[2]" = "2"
+
+	# PCIe port 11 for card reader
+	register "PcieRpEnable[10]" = "1"
+	register "PcieRpLtrEnable[10]" = "1"
+	register "PcieClkSrcUsage[1]" = "10"
+	register "PcieClkSrcClkReq[1]" = "1"
+
+	# PCIe port 13 for M.2 2280 SSD
+	register "PcieRpEnable[12]" = "1"
+	register "PcieRpLtrEnable[12]" = "1"
+	register "PcieClkSrcUsage[4]" = "12"
+	register "PcieClkSrcClkReq[4]" = "4"
+
+	# GPIO PM programming
+	register "gpio_override_pm" = "1"
+
+	# GPIO community PM configuration
+	register "gpio_pm[COMM_0]" = "MISCCFG_ENABLE_GPIO_PM_CONFIG"
+	register "gpio_pm[COMM_1]" = "MISCCFG_GPSIDEDPCGEN | MISCCFG_GPRTCDLCGEN | MISCCFG_GSXSLCGEN | MISCCFG_GPDPCGEN | MISCCFG_GPDLCGEN"
+	register "gpio_pm[COMM_2]" = "MISCCFG_ENABLE_GPIO_PM_CONFIG"
+	register "gpio_pm[COMM_3]" = "MISCCFG_ENABLE_GPIO_PM_CONFIG"
+	register "gpio_pm[COMM_4]" = "MISCCFG_ENABLE_GPIO_PM_CONFIG"
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+	device domain 0 on
+		device pci 00.0 on  end # Host Bridge
+		device pci 02.0 on  end # Integrated Graphics Device
+		device pci 04.0 on  end # SA Thermal device
+		device pci 12.0 on  end # Thermal Subsystem
+		device pci 12.5 off end # UFS SCS
+		device pci 12.6 off end # GSPI #2
+		device pci 13.0 on	# Integrated Sensor Hub
+			chip drivers/intel/ish
+				register "firmware_name" = ""drallion_ish.bin""
+				device generic 0 on end
+			end
+		end
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				register "desc" = ""Root Hub""
+				register "type" = "UPC_TYPE_HUB"
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-C Port""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 2.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-A Port""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-A Port""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 2.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USH""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Fingerprint""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H15)"
+						device usb 2.9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-C Port""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 3.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-A Port""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device usb 3.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-A Port""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 3.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.3 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 14.1 off end # USB xDCI (OTG)
+		chip drivers/intel/wifi
+			register "wake" = "PME_B0_EN_BIT"
+			device pci 14.3 on  end # CNVi wifi
+		end
+		device pci 14.5 off end # SDCard
+		device pci 15.0 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""WCOM48E2""
+				register "generic.desc" = ""Wacom Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C23_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E7)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
+				register "generic.enable_delay_ms" = "55"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0A on end
+			end
+		end # I2C #0
+		device pci 15.1 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
+				register "probed" = "1"
+				device i2c 2c on end
+			end
+		end # I2C #1
+		device pci 15.2 off end # I2C #2
+		device pci 15.3 off end # I2C #3
+		device pci 16.0 on  end # Management Engine Interface 1
+		device pci 16.1 off end # Management Engine Interface 2
+		device pci 16.2 off end # Management Engine IDE-R
+		device pci 16.3 off end # Management Engine KT Redirection
+		device pci 16.4 off end # Management Engine Interface 3
+		device pci 16.5 off end # Management Engine Interface 4
+		device pci 17.0 on  end # SATA
+		device pci 19.0 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D18_IRQ)"
+				device i2c 50 on end
+			end
+		end # I2C #4
+		device pci 19.1 off end # I2C #5
+		device pci 19.2 on  end # UART #2
+		device pci 1a.0 off end # eMMC
+		device pci 1c.0 off end # PCI Express Port 1 (USB)
+		device pci 1c.1 off end # PCI Express Port 2 (USB)
+		device pci 1c.2 off end # PCI Express Port 3 (USB)
+		device pci 1c.3 off end # PCI Express Port 4 (USB)
+		device pci 1c.4 off end # PCI Express Port 5 (USB)
+		device pci 1c.5 off end # PCI Express Port 6
+		device pci 1c.6 off end # PCI Express Port 7
+		device pci 1c.7 off end # PCI Express Port 8
+		device pci 1d.0 on
+			smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "2230" "SlotDataBusWidth1X"
+		end # PCI Express Port 9
+		device pci 1d.1 on  end # PCI Express Port 10
+		device pci 1d.2 on  end # PCI Express Port 11
+		device pci 1d.3 off end # PCI Express Port 12
+		device pci 1d.4 on
+			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "2280" "SlotDataBusWidth4X"
+		end # PCI Express Port 13 (x4)
+		device pci 1e.0 off end # UART #0
+		device pci 1e.1 off end # UART #1
+		device pci 1e.2 off end # GSPI #0
+		device pci 1e.3 off end # GSPI #1
+		device pci 1f.0 on
+			chip ec/google/wilco
+				device pnp 0c09.0 on end
+			end
+		end # LPC/eSPI
+		device pci 1f.1 on  end # P2SB
+		device pci 1f.2 on  end # Power Management Controller
+		device pci 1f.3 on  end # Intel HDA
+		device pci 1f.4 on  end # SMBus
+		device pci 1f.5 on  end # PCH SPI
+		device pci 1f.6 off end # GbE
+	end
+end
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/gpio.c b/src/mainboard/google/drallion/variants/arcada_cml/gpio.c
new file mode 100644
index 0000000000..ff0240c991
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/gpio.c
@@ -0,0 +1,279 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#include <variant/gpio.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config gpio_table[] = {
+/* RCIN# */		PAD_NC(GPP_A0, NONE),
+/* ESPI_IO0 */
+/* ESPI_IO1 */
+/* ESPI_IO2 */
+/* ESPI_IO3 */
+/* ESPI_CS# */
+/* SERIRQ */
+/* PIRQA# */		PAD_NC(GPP_A7, NONE),
+/* CLKRUN# */		PAD_NC(GPP_A8, NONE),
+/* ESPI_CLK */
+/* CLKOUT_LPC1 */	PAD_NC(GPP_A10, NONE),
+/* PME# */		PAD_NC(GPP_A11, NONE),
+			/* ISH_LID_CL#_TAB */
+/* ISH_GP6 */		PAD_CFG_NF(GPP_A12, NONE, DEEP, NF2),
+/* SUSWARN# */		PAD_NC(GPP_A13, NONE),
+/* ESPI_RESET# */
+/* SUSACK# */		PAD_NC(GPP_A15, NONE),
+/* SD_1P8_SEL */	PAD_NC(GPP_A16, NONE),
+/* SD_PWR_EN# */	PAD_NC(GPP_A17, NONE),
+			/* ISH_ACC1_INT# */
+/* ISH_GP0 */		PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
+			/* ISH_ACC2_INT# */
+/* ISH_GP1 */		PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1),
+/* ISH_GP2 */		PAD_NC(GPP_A20, NONE),
+/* ISH_GP3 */		PAD_NC(GPP_A21, NONE),
+			/* ISH_NB_MODE */
+/* ISH_GP4 */		PAD_CFG_NF(GPP_A22, NONE, DEEP, NF1),
+			/* ISH_LID_CL#_NB */
+/* ISH_GP5 */		PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1),
+
+/* CORE_VID0 */
+/* CORE_VID1 */
+/* VRALERT# */		PAD_NC(GPP_B2, NONE),
+/* CPU_GP2 */		PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST,
+				 EDGE_SINGLE, INVERT), /* TOUCHPAD_INTR# */
+/* CPU_GP3 */		PAD_CFG_GPI(GPP_B4, NONE, DEEP), /* TOUCH_SCREEN_DET# */
+			 /* LAN_CLKREQ_CPU_N */
+/* SRCCLKREQ0# */	PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
+			/* CARD_CLKREQ_CPU_N */
+/* SRCCLKREQ1# */	PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1),
+			/* WLAN_CLKREQ_CPU_N */
+/* SRCCLKREQ2# */	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
+			/* WWAN_CLKREQ_CPU_N */
+/* SRCCLKREQ3# */	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1),
+			/* SSD_CKLREQ_CPU_N */
+/* SRCCLKREQ4# */	PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
+/* SRCCLKREQ5# */	PAD_NC(GPP_B10, NONE), /* TBT_CLKREQ_CPU_N (nostuff) */
+/* EXT_PWR_GATE# */	PAD_CFG_GPO(GPP_B11, 0, DEEP), /* 3.3V_CAM_EN# */
+/* SLP_S0# */		PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
+/* PLTRST# */		PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
+/* SPKR */		PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),
+/* GSPI0_CS# */		PAD_NC(GPP_B15, NONE), /* PRIM_CORE_OPT_DIS (nostuff) */
+/* GSPI0_CLK */		PAD_CFG_GPI(GPP_B16, NONE, DEEP), /* ONE_DIMM# */
+/* GSPI0_MISO */	PAD_NC(GPP_B17, NONE), /* RTC_DET# */
+/* GSPI0_MOSI */	PAD_NC(GPP_B18, NONE),
+/* GSPI1_CS# */		PAD_NC(GPP_B19, NONE), /* HDD_FALL_INT (nostuff) */
+/* GSPI1_CLK */		PAD_NC(GPP_B20, NONE), /* TPM_PIRQ# (nostuff) */
+/* GSPI1_MISO */	PAD_CFG_GPO(GPP_B21, 1, DEEP), /* PCH_3.3V_TS_EN */
+/* GSPI1_MOSI */	PAD_NC(GPP_B22, NONE),
+/* SML1ALERT# */	PAD_NC(GPP_B23, DN_20K),
+
+/* SMBCLK */		PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), /* MEM_SMBCLK */
+/* SMBDATA */		PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), /* MEM_SMBDATA */
+/* SMBALERT# */		PAD_NC(GPP_C2, DN_20K),
+/* SML0CLK */		PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), /* SML0_SMBCLK */
+/* SML0DATA */		PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), /* SML0_SMBDATA */
+/* SML0ALERT# */	PAD_NC(GPP_C5, DN_20K),
+/* SM1CLK */		PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1), /* SML1_SMBCLK */
+/* SM1DATA */		PAD_CFG_NF(GPP_C7, NONE, DEEP, NF1), /* SML1_SMBDATA */
+/* UART0_RXD */		PAD_NC(GPP_C8, NONE), /* PCH_TBT_PERST# (nostuff) */
+/* UART0_TXD */		PAD_NC(GPP_C9, NONE),
+/* UART0_RTS# */	PAD_CFG_GPI(GPP_C10, NONE, DEEP), /* TYPEC_CON_SEL1 */
+/* UART0_CTS# */	PAD_CFG_GPI(GPP_C11, NONE, DEEP), /* TYPEC_CON_SEL2 */
+/* UART1_RXD */         PAD_CFG_GPI_SCI_LOW(GPP_C12, NONE, DEEP,
+				    EDGE_SINGLE), /* SIO_EXT_WAKE# */
+/* UART1_TXD */		PAD_NC(GPP_C13, NONE),
+/* UART1_RTS# */	PAD_CFG_GPI(GPP_C14, NONE, DEEP), /* LCD_CBL_DET# */
+/* UART1_CTS# */	PAD_NC(GPP_C15, NONE),
+/* I2C0_SDA */		PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), /* TS_I2C_SDA */
+/* I2C0_SCL */		PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), /* TS_I2C_SCL */
+/* I2C1_SDA */		PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), /* I2C1_SDA_TP */
+/* I2C1_SCL */		PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), /* I2C1_SCK_TP */
+/* UART2_RXD */		PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* SERVOTX_UART */
+/* UART2_TXD */		PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* SERVORX_UART */
+/* UART2_RTS# */	PAD_NC(GPP_C22, NONE),
+/* UART2_CTS# */	PAD_CFG_GPI_APIC(GPP_C23, NONE, PLTRST,
+				 LEVEL, NONE), /* TS_INT# */
+
+/* SPI1_CS# */		PAD_CFG_GPI_APIC(GPP_D0, NONE, PLTRST,
+				 EDGE_SINGLE, INVERT), /* MEDIACARD_IRQ# */
+/* SPI1_CLK */		PAD_NC(GPP_D1, NONE),
+/* SPI1_MISO */		PAD_CFG_GPI(GPP_D2, NONE, DEEP), /* ISH_LAN# */
+/* SPI1_MOSI */		PAD_NC(GPP_D3, NONE),
+/* FASHTRIG */		PAD_NC(GPP_D4, NONE), /* TBT_FORCE_PWR (nostuff) */
+			/* ISH_I2C0_ACC_SDA */
+/* ISH_I2C0_SDA */	PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1),
+			/* ISH_I2C0_ACC_SCL */
+/* ISH_I2C0_SCL */	PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1),
+/* ISH_I2C1_SDA */	PAD_NC(GPP_D7, NONE),
+/* ISH_I2C1_SCL */	PAD_NC(GPP_D8, NONE),
+/* ISH_SPI_CS# */	PAD_CFG_GPI(GPP_D9, NONE, DEEP), /* IR_CAM_DET# */
+/* ISH_SPI_CLK */	PAD_NC(GPP_D10, NONE),
+/* ISH_SPI_MISO */	PAD_CFG_GPI(GPP_D11, NONE, DEEP), /* TBT_DET# */
+/* ISH_SPI_MOSI */	PAD_NC(GPP_D12, NONE),
+			/* ISH_CPU_UART0_RX */
+/* ISH_UART0_RXD */	PAD_CFG_NF(GPP_D13, UP_20K, DEEP, NF1),
+			/* ISH_CPU_UART0_TX */
+/* ISH_UART0_TXD */	PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1),
+/* ISH_UART0_RTS# */	PAD_CFG_GPO(GPP_D15, 1, DEEP), /* WWAN_FULL_PWR_EN */
+/* ISH_UART0_CTS# */	PAD_NC(GPP_D16, NONE),
+/* DMIC_CLK1 */		PAD_CFG_GPI(GPP_D17, NONE, DEEP), /* KB_DET# */
+/* DMIC_DATA1 */	PAD_CFG_GPI_APIC(GPP_D18, NONE, PLTRST,
+				 EDGE_SINGLE, INVERT), /* H1_PCH_INT_ODL */
+/* DMIC_CLK0 */		PAD_NC(GPP_D19, NONE),
+/* DMIC_DATA0 */	PAD_NC(GPP_D20, NONE),
+/* SPI1_IO2 */		PAD_CFG_GPO(GPP_D21, 1, DEEP), /* WWAN_BB_RST# */
+/* SPI1_IO3 */		PAD_CFG_GPO(GPP_D22, 0, DEEP), /* WWAN_GPIO_PERST# */
+/* I2S_MCLK */		PAD_CFG_GPI_SCI_LOW(GPP_D23, NONE, DEEP,
+				 EDGE_SINGLE), /* WWAN_GPIO_WAKE# */
+
+/* SATAXPCIE0 */	PAD_NC(GPP_E0, NONE),
+			/* M3042_PCIE#_SATA */
+/* SATAXPCIE1 */	PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
+			/* M2880_PCIE_SATA# */
+/* SATAXPCIE2 */	PAD_CFG_NF(GPP_E2, NONE, DEEP, NF1),
+/* CPU_GP0 */		PAD_CFG_GPI(GPP_E3, NONE, DEEP), /* MEM_INTERLEAVED */
+/* SATA_DEVSLP0 */	PAD_NC(GPP_E4, NONE),
+/* SATA_DEVSLP1 */	PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1), /* M3042_DEVSLP */
+/* SATA_DEVSLP2 */	PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1), /* M2280_DEVSLP */
+/* CPU_GP1 */		PAD_CFG_GPO(GPP_E7, 1, DEEP), /* TOUCH_SCREEN_PD# */
+/* SATALED# */		PAD_CFG_GPI(GPP_E8, NONE, DEEP), /* RECOVERY# */
+/* USB2_OCO# */		PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), /* USB_OC0# */
+/* USB2_OC1# */		PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), /* USB_OC1# */
+/* USB2_OC2# */		PAD_NC(GPP_E11, NONE),
+/* USB2_OC3# */		PAD_NC(GPP_E12, NONE),
+/* DDPB_HPD0 */		PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), /* DP_HPD_CPU */
+/* DDPC_HPD1 */		PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), /* DP2_HPD_CPU */
+/* DDPD_HPD2 */		PAD_CFG_GPI(GPP_E15, NONE, DEEP), /* PCH_WP */
+/* DDPE_HPD3 */		PAD_NC(GPP_E16, NONE), /* FFS_INT2 (nostuff) */
+/* EDP_HPD */		PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
+/* DDPB_CTRLCLK */	PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), /* HDMI_SCL_CPU */
+/* DDPB_CTRLDATA */	PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1), /* HDMI_SDA_CPU */
+/* DDPC_CTRLCLK */	PAD_NC(GPP_E20, NONE),
+/* DDPC_CTRLDATA */	PAD_NC(GPP_E21, NONE),
+/* DDPD_CTRLCLK */	PAD_NC(GPP_E22, NONE),
+/* DDPD_CTRLDATA */	PAD_NC(GPP_E23, NONE),
+
+/* CNV_PA_BLANKING */	PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), /* CNV_COEX3 */
+/* GPP_F1 */		PAD_NC(GPP_F1, NONE),
+/* GPP_F2 */		PAD_NC(GPP_F2, NONE),
+/* GPP_F3 */		PAD_NC(GPP_F3, NONE),
+/* CNV_BRI_DT */	PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1),
+/* CNV_BRI_RSP */	PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1),
+/* CNV_RGI_DT */	PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1),
+/* CNV_RGI_RSP */	PAD_CFG_NF(GPP_F7, NONE, DEEP, NF1),
+/* CNV_MFUART2_RXD */	PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1), /* CNV_COEX2 */
+/* CNV_MFUART2_TXD */	PAD_CFG_NF(GPP_F9, NONE, DEEP, NF1), /* CNV_COEX1 */
+/* GPP_F10 */		PAD_NC(GPP_F10, NONE),
+/* EMMC_CMD */		PAD_NC(GPP_F11, NONE),
+/* EMMC_DATA0 */	PAD_NC(GPP_F12, NONE),
+/* EMMC_DATA1 */	PAD_NC(GPP_F13, NONE),
+/* EMMC_DATA2 */	PAD_NC(GPP_F14, NONE),
+/* EMMC_DATA3 */	PAD_NC(GPP_F15, NONE),
+/* EMMC_DATA4 */	PAD_NC(GPP_F16, NONE),
+/* EMMC_DATA5 */	PAD_NC(GPP_F17, NONE),
+/* EMMC_DATA6 */	PAD_NC(GPP_F18, NONE),
+/* EMMC_DATA7 */	PAD_NC(GPP_F19, NONE),
+/* EMMC_RCLK */		PAD_NC(GPP_F20, NONE),
+/* EMMC_CLK */		PAD_NC(GPP_F21, NONE),
+/* EMMC_RESET# */	PAD_NC(GPP_F22, NONE),
+/* A4WP_PRESENT */	PAD_NC(GPP_F23, NONE),
+
+/* SD_CMD */		PAD_CFG_GPI(GPP_G0, NONE, DEEP), /* CAM_MIC_CBL_DET# */
+/* SD_DATA0 */		PAD_NC(GPP_G1, NONE), /* ANT_CONFIG (nostuff) */
+/* SD_DATA1 */		PAD_NC(GPP_G2, NONE), /* TBT_CIO_PLUG_EVT# (nostuff) */
+/* SD_DATA2 */		PAD_NC(GPP_G3, NONE),
+/* SD_DATA3 */		PAD_CFG_GPI(GPP_G4, NONE, DEEP), /* CTLESS_DET# */
+/* SD_CD# */		PAD_CFG_GPO(GPP_G5, 1, DEEP), /* HOST_SD_WP# */
+/* SD_CLK */		PAD_CFG_GPO(GPP_G6, 1, DEEP), /* AUD_PWR_EN */
+/* SD_WP */		PAD_CFG_GPI(GPP_G7, NONE, DEEP), /* SPK_DET# */
+
+/* I2S2_SCLK */		PAD_NC(GPP_H0, NONE),
+/* I2S2_SFRM */		PAD_CFG_NF(GPP_H1, NONE, DEEP, NF3), /* CNV_RF_RESET# */
+/* I2S2_TXD */		PAD_CFG_NF(GPP_H2, NONE, DEEP, NF3), /* CLKREQ_CNV# */
+/* I2S2_RXD */		PAD_NC(GPP_H3, NONE),
+/* I2C2_SDA */		PAD_NC(GPP_H4, NONE),
+/* I2C2_SCL */		PAD_NC(GPP_H5, NONE),
+/* I2C3_SDA */		PAD_NC(GPP_H6, NONE),
+/* I2C3_SCL */		PAD_NC(GPP_H7, NONE),
+/* I2C4_SDA */		PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1), /* I2C_SDA_H1 */
+/* I2C4_SCL */		PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), /* I2C_SCL_H1 */
+/* I2C5_SDA */		PAD_NC(GPP_H10, NONE), /* ISH_I2C2_SDA */
+/* I2C5_SCL */		PAD_NC(GPP_H11, NONE), /* ISH_I2C2_SCL */
+/* M2_SKT2_CFG2 */	PAD_NC(GPP_H14, NONE),
+/* M2_SKT2_CFG3 */      PAD_CFG_GPO(GPP_H15, 1, DEEP), /* BT_RADIO_DIS# */
+/* DDPF_CTRLCLK */	PAD_NC(GPP_H16, NONE),
+/* DPPF_CTRLDATA */	PAD_NC(GPP_H17, NONE),
+/* CPU_C10_GATE# */	PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), /* C10_GATE# */
+/* TIMESYNC0 */		PAD_NC(GPP_H19, NONE),
+/* IMGCLKOUT1 */	PAD_NC(GPP_H20, NONE),
+/* GPP_H21 */		PAD_NC(GPP_H21, NONE),
+/* GPP_H22 */		PAD_NC(GPP_H22, NONE), /* RTD3_CIO_PWR_EN (nostuff) */
+/* GPP_H23 */		PAD_NC(GPP_H23, NONE),
+
+/* BATLOW# */		PAD_CFG_NF(GPD0, NONE, DEEP, NF1), /* BATLOW# */
+/* ACPRESENT */		PAD_CFG_NF(GPD1, NONE, DEEP, NF1), /* AC_PRESENT */
+/* LAN_WAKE# */		PAD_CFG_NF(GPD2, NONE, DEEP, NF1), /* LAN_WAKE# */
+/* PWRBTN# */		PAD_CFG_NF(GPD3, NONE, DEEP, NF1), /* SIO_PWRBTN# */
+/* SLP_S3# */		PAD_CFG_NF(GPD4, NONE, DEEP, NF1), /* SIO_SLP_S3# */
+/* SLP_S4# */		PAD_CFG_NF(GPD5, NONE, DEEP, NF1), /* SIO_SLP_S4# */
+/* SLP_A# */		PAD_CFG_NF(GPD6, NONE, DEEP, NF1), /* SIO_SLP_A# */
+/* GPD7 */		PAD_NC(GPD7, NONE), /* TBT_RTD3_WAKE# (nostuff) */
+/* SUSCLK */		PAD_CFG_NF(GPD8, NONE, DEEP, NF1), /* SUSCLK */
+/* SLP_WLAN# */		PAD_CFG_NF(GPD9, NONE, DEEP, NF1), /* SIO_SLP_WLAN# */
+/* SLP_S5# */		PAD_CFG_NF(GPD10, NONE, DEEP, NF1), /* SIO_SLP_S5# */
+/* LANPHYC */		PAD_CFG_NF(GPD11, NONE, DEEP, NF1), /* PM_LANPHY_EN */
+};
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+/* M2_SKT2_CFG1 */	PAD_CFG_GPO(GPP_H13, 1, DEEP), /* M.2 SSD D3 cold */
+/* SSD RESET pin will stay low first */
+/* M2_SKT2_CFG0 */	PAD_CFG_GPO(GPP_H12, 0, DEEP), /* D3 cold RST */
+/* UART2_RXD */		PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* SERVOTX_UART */
+/* UART2_TXD */		PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* SERVORX_UART */
+/* I2C4_SDA */		PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1), /* I2C_SDA_H1 */
+/* I2C4_SCL */		PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), /* I2C_SCL_H1 */
+/* DMIC_DATA1 */	PAD_CFG_GPI_APIC(GPP_D18, NONE, PLTRST,
+				 EDGE_SINGLE, INVERT), /* H1_PCH_INT_ODL */
+/* RESET# need to stay low before FULL_CARD_POWER_OFF assert */
+/* SPI1_IO2 */		PAD_CFG_GPO(GPP_D21, 0, DEEP), /* WWAN_BB_RST# */
+/* CPU_GP0 */		PAD_CFG_GPI(GPP_E3, NONE, DEEP), /* MEM_INTERLEAVED */
+/* SATALED# */		PAD_CFG_GPI(GPP_E8, NONE, DEEP), /* RECOVERY# */
+/* DDPD_HPD2 */		PAD_CFG_GPI(GPP_E15, NONE, DEEP), /* PCH_WP */
+/* M2_SKT2_CFG0 */	PAD_CFG_GPO(GPP_H12, 1, DEEP), /* D3 cold RST */
+};
+
+const struct pad_config *variant_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
+
+static const struct cros_gpio cros_gpios[] = {
+	CROS_GPIO_REC_AL(GPP_E8, CROS_GPIO_DEVICE_NAME),
+	CROS_GPIO_WP_AH(GPP_E15, CROS_GPIO_DEVICE_NAME),
+};
+
+const struct cros_gpio *variant_cros_gpios(size_t *num)
+{
+	*num = ARRAY_SIZE(cros_gpios);
+	return cros_gpios;
+}
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/include/variant/acpi/dptf.asl b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/acpi/dptf.asl
new file mode 100644
index 0000000000..73e1decc1b
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/acpi/dptf.asl
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE	98
+#define DPTF_CPU_CRITICAL	108
+
+/* Skin Sensor for CPU VR temperature monitor */
+#define DPTF_TSR0_SENSOR_ID	1
+#define DPTF_TSR0_SENSOR_NAME	"Skin"
+#define DPTF_TSR0_PASSIVE	55
+#define DPTF_TSR0_CRITICAL	100
+
+/* Memory Sensor for DDR temperature monitor */
+#define DPTF_TSR1_SENSOR_ID	2
+#define DPTF_TSR1_SENSOR_NAME	"DDR"
+#define DPTF_TSR1_PASSIVE	53
+#define DPTF_TSR1_CRITICAL	100
+
+/* M.2 Sensor for Ambient temperature monitor */
+#define DPTF_TSR2_SENSOR_ID	3
+#define DPTF_TSR2_SENSOR_NAME	"Ambient"
+#define DPTF_TSR2_PASSIVE	38
+#define DPTF_TSR2_CRITICAL	93
+
+#undef DPTF_ENABLE_FAN_CONTROL
+#undef DPTF_ENABLE_CHARGER
+
+Name (DTRT, Package () {
+	/* CPU Throttle Effect on CPU */
+	Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 500, 100, 0, 0, 0, 0 },
+
+	/* CPU Throttle Effect on Skin (TSR0) */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 400, 40, 0, 0, 0, 0 },
+
+	/* CPU Throttle Effect on DDR (TSR1) */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 300, 50, 2, 0, 0, 0 },
+
+	/* CPU Throttle Effect on Ambient (TSR2) */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 1000, 100, 1, 0, 0, 0 },
+})
+
+Name (MPPC, Package ()
+{
+	0x2,		/* Revision */
+	Package () {	/* Power Limit 1 */
+		0,	/* PowerLimitIndex, 0 for Power Limit 1 */
+		3000,	/* PowerLimitMinimum */
+		21000,	/* PowerLimitMaximum */
+		28000,	/* TimeWindowMinimum */
+		28000,	/* TimeWindowMaximum */
+		100	/* StepSize */
+	},
+	Package () {	/* Power Limit 2 */
+		1,	/* PowerLimitIndex, 1 for Power Limit 2 */
+		15000,	/* PowerLimitMinimum */
+		51000,	/* PowerLimitMaximum */
+		28000,	/* TimeWindowMinimum */
+		28000,	/* TimeWindowMaximum */
+		100	/* StepSize */
+	}
+})
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/include/variant/acpi/mainboard.asl b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/acpi/mainboard.asl
new file mode 100644
index 0000000000..41121d28fe
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/acpi/mainboard.asl
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define CAM_EN GPP_B11 /* Active low */
+#define TS_PD GPP_E7
+
+/* Method called from LPIT prior to enter s0ix state */
+Method (MS0X, 1)
+{
+	If (Arg0) {
+		/* Turn off camera power */
+		\_SB.PCI0.STXS (CAM_EN)
+	} Else {
+		/* Turn on camera power */
+		\_SB.PCI0.CTXS (CAM_EN)
+	}
+}
+
+/* Method called from _PTS prior to enter sleep state */
+Method (MPTS, 1)
+{
+	\_SB.PCI0.LPCB.EC0.PTS (Arg0)
+
+	/* Clear touch screen pd pin to avoid leakage */
+	\_SB.PCI0.CTXS (TS_PD)
+}
+
+/* Method called from _WAK prior to wakeup */
+Method (MWAK, 1)
+{
+	\_SB.PCI0.LPCB.EC0.WAK (Arg0)
+}
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/include/variant/ec.h b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/ec.h
new file mode 100644
index 0000000000..01a17b5f99
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/ec.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VARIANT_EC_H
+#define VARIANT_EC_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+/* EC wake pin */
+#define EC_WAKE_PIN		GPE0_DW1_12
+
+/* eSPI virtual wire reporting */
+#define EC_SCI_GPI		GPE0_ESPI
+
+/* Enable PS/2 keyboard */
+#define SIO_EC_ENABLE_PS2K
+
+/* Enable DPTF */
+#define EC_ENABLE_DPTF
+
+#endif
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/include/variant/gpio.h b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/gpio.h
new file mode 100644
index 0000000000..f7e0403e59
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VARIANT_GPIO_H
+#define VARIANT_GPIO_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+/* Flash Write Protect */
+#define GPIO_PCH_WP		GPP_E15
+
+/* Recovery mode */
+#define GPIO_REC_MODE		GPP_E8
+
+const struct pad_config *variant_gpio_table(size_t *num);
+const struct pad_config *variant_early_gpio_table(size_t *num);
+
+struct cros_gpio;
+const struct cros_gpio *variant_cros_gpios(size_t *num);
+
+#endif
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/include/variant/hda_verb.h b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/hda_verb.h
new file mode 100644
index 0000000000..10fbaf13f5
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/hda_verb.h
@@ -0,0 +1,209 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_HDA_VERB_H
+#define MAINBOARD_HDA_VERB_H
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+	/* coreboot specific header */
+	0x10ec0295,	// Codec Vendor / Device ID: Realtek ALC3204
+	0xffffffff,	// Subsystem ID
+	0x0000002b,	// Number of jacks (NID entries)
+
+	/* Rest Codec First */
+	AZALIA_RESET(0x1),
+	/* NID 0x01, HDA Codec Subsystem ID Verb Table */
+	AZALIA_SUBVENDOR(0x0, 0x102808b6),
+
+	/* Pin Widget Verb Table */
+	AZALIA_PIN_CFG(0x0, 0x12, 0xb7a60130),
+	AZALIA_PIN_CFG(0x0, 0x13, 0x411111f0),
+	AZALIA_PIN_CFG(0x0, 0x14, 0x90170110),
+	AZALIA_PIN_CFG(0x0, 0x16, 0x40000000),
+	AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0),
+	AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0),
+	AZALIA_PIN_CFG(0x0, 0x19, 0x04a11030),
+	AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0),
+	AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0),
+	AZALIA_PIN_CFG(0x0, 0x1d, 0x40c00001),
+	AZALIA_PIN_CFG(0x0, 0x1e, 0x421212f2),
+	AZALIA_PIN_CFG(0x0, 0x21, 0x04211020),
+
+	/* D reset */
+	0x0205003C,
+	0x0204F254,
+	0x0205003C,
+	0x0204F214,
+	/* JD1 - 2port JD mode */
+	0x02050009,
+	0x0204E003,
+	0x0205000A,
+	0x02047770,
+	/* Set TRS type-1 */
+	0x02050045,
+	0x02045289,
+	0x02050049,
+	0x02040049,
+	/* Set TRS type-2 + Set UAJ Line2 vref(ALC3254) */
+	0x0205004A,
+	0x0204A830,
+	0x02050063,
+	0x0204CF00,
+	/* NID 0x20 set class-D to 2W@4ohm (+12dB gain)
+	 * + Set sine tone gain(0x34) */
+	0x02050038,
+	0x02043909,
+	0x05C50000,
+	0x05C43482,
+	/* AGC-1 Disable + (Front Gain=0dB ) */
+	0x05D50006,
+	0x05D44C50,
+	0x05D50002,
+	0x05D44004,
+	/* AGC-2   (Backt Boost Gain= -0.375dB  ,Limiter = -3dB) */
+	0x05D50003,
+	0x05D45E5E,
+	0x05D50001,
+	0x05D4D788,
+	/* AGC-3 + AGC Enable */
+	0x05D50009,
+	0x05D451FF,
+	0x05D50006,
+	0x05D44E50,
+	/* HP-JD Enable +Nokia type */
+	0x0205004A,
+	0x02042010,
+	0x02050008,
+	0x02046A0C,
+	/* EAPD set to verb-control + I2C Un-use+ DVDD3.3V */
+	0x02050010,
+	0x02040020,
+	0x02050034,
+	0x0204A23D,
+	/* Class D silent detection Enable -84dB threshold */
+	0x02050030,
+	0x02049000,
+	0x02050037,
+	0x0204FE15,
+	/* Disable EQ + set 250Hz 3rd High Pass filter */
+	0x05350000,
+	0x0534203A,
+	0x05350000,
+	0x0534203A,
+	/* Left Channel-1 */
+	0x0535001d,
+	0x05340800,
+	0x0535001e,
+	0x05340800,
+	/* Left Channel-2 */
+	0x05350003,
+	0x05341EF8,
+	0x05350004,
+	0x05340000,
+	/* Left Channel-3 */
+	0x05350005,
+	0x053403EE,
+	0x05350006,
+	0x0534FA60,
+	/* Left Channel-4 */
+	0x05350007,
+	0x05341E10,
+	0x05350008,
+	0x05347B86,
+	/* Left Channel-5 */
+	0x05350009,
+	0x053401F7,
+	0x0535000A,
+	0x05349FB6,
+	/* Left Channel-6 */
+	0x0535000B,
+	0x05341C00,
+	0x0535000C,
+	0x05340000,
+	/* Left Channel-7 */
+	0x0535000D,
+	0x05340200,
+	0x0535000E,
+	0x05340000,
+	/* Right Channel-1 */
+	0x05450000,
+	0x05442000,
+	0x0545001d,
+	0x05440800,
+	/* Right Channel-2 */
+	0x0545001e,
+	0x05440800,
+	0x05450003,
+	0x05441EF8,
+	/* Right Channel-3 */
+	0x05450004,
+	0x05440000,
+	0x05450005,
+	0x054403EE,
+	/* Right Channel-4 */
+	0x05450006,
+	0x0544FA60,
+	0x05450007,
+	0x05441E10,
+	/* Right Channel-5 */
+	0x05450008,
+	0x05447B86,
+	0x05450009,
+	0x054401F7,
+	/* Right Channel-6 */
+	0x0545000A,
+	0x05449FB6,
+	0x0545000B,
+	0x05441C00,
+	/* Right Channel-7 */
+	0x0545000C,
+	0x05440000,
+	0x0545000D,
+	0x05440200,
+	/* Right Channel-8 + EQ Update & Enable */
+	0x0545000E,
+	0x05440000,
+	0x05350000,
+	0x0534E03A,
+	/* Enable all Microphone */
+	0x0205000D,
+	0x0204A023,
+	0x0205000D,
+	0x0204A023,
+	/* Enable Internal Speaker (NID14) */
+	0x0205000F,
+	0x02040000,
+	0x0205000F,
+	0x02040000,
+};
+
+const u32 pc_beep_verbs[] = {
+	/* PCBeep pass through to NID14 for ePSA test-1 */
+	0x02050036,
+	0x020477D7,
+	0x0143B000,
+	0x01470740,
+	/* PCBeep pass through to NID14 for ePSA test-2 */
+	0x01470C02,
+	0x01470C02,
+	0x01470C02,
+	0x01470C02,
+};
+
+AZALIA_ARRAY_SIZES;
+
+#endif
diff --git a/src/mainboard/google/drallion/variants/arcada_cml/include/variant/variant.h b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/variant.h
new file mode 100644
index 0000000000..da1189e14c
--- /dev/null
+++ b/src/mainboard/google/drallion/variants/arcada_cml/include/variant/variant.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VARIANT_H
+#define VARIANT_H
+
+/* Arcada is SKU ID 2 and 4 */
+#define VARIANT_SKU_ID			2
+#define VARIANT_SKU_NAME		"sku2"
+#define VARIANT_SKU_ID_SIGNED_EC	4
+#define VARIANT_SKU_NAME_SIGNED_EC	"sku4"
+
+#endif