mb/google/dedede: add gooey variant

gooey is the same design as boten, and differs only in replacing Cr50
with discrete TPM.

BUG=b:193366710, 197247706
TEST=FW_NAME=gooey emerge-keeby coreboot

Signed-off-by: stanley.wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I2a54f872a7d5c0bee76a9e6e309613d9357b380b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>

9 files changed, 447 insertions, 0 deletions

diff --git a/src/mainboard/google/dedede/variants/gooey/Makefile.inc b/src/mainboard/google/dedede/variants/gooey/Makefile.inc
new file mode 100644
index 0000000000..5ca7b86d1d
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/Makefile.inc
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+ramstage-y += gpio.c
+
+smm-y += variant.c
+
+ramstage-y += variant.c
diff --git a/src/mainboard/google/dedede/variants/gooey/gpio.c b/src/mainboard/google/dedede/variants/gooey/gpio.c
new file mode 100644
index 0000000000..6046acb94f
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/gpio.c
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+/* Pad configuration in ramstage*/
+static const struct pad_config gpio_table[] = {
+	/* A10 : WWAN_EN => LTE_PWR_OFF_ODL */
+	PAD_CFG_GPO(GPP_A10, 1, PWROK),
+
+	/* B7  : WWAN_SAR_DETECT_R_ODL */
+	PAD_CFG_GPO(GPP_B7, 1, DEEP),
+
+	/* C12 : AP_PEN_DET_ODL */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, UP_20K, DEEP),
+	/* C18 : AP_I2C_EMR_SDA */
+	PAD_NC(GPP_C18, NONE),
+	/* C19 : AP_I2C_EMR_SCL */
+	PAD_NC(GPP_C19, NONE),
+	/* C22 : UART2_RTS_N */
+	PAD_NC(GPP_C22, NONE),
+	/* C23 : UART2_CTS_N */
+	PAD_NC(GPP_C23, NONE),
+
+	/* D12 : WCAM_RST_L */
+	PAD_NC(GPP_D12, NONE),
+	/* D13 : EN_PP2800_CAMERA */
+	PAD_CFG_GPO(GPP_D13, 1, PLTRST),
+	/* D14 : EN_PP1200_CAMERA */
+	PAD_NC(GPP_D14, NONE),
+	/* D15 : UCAM_RST_L */
+	PAD_NC(GPP_D15, NONE),
+	/* D19 : WWAN_WLAN_COEX1 */
+	PAD_NC(GPP_D19, NONE),
+	/* D20 : WWAN_WLAN_COEX2 */
+	PAD_NC(GPP_D20, NONE),
+	/* D21 : WWAN_WLAN_COEX3 */
+	PAD_NC(GPP_D21, NONE),
+	/* D22 : AP_I2C_SUB_SDA*/
+	PAD_CFG_NF(GPP_D22, NONE, DEEP, NF1),
+	/* D23 : AP_I2C_SUB_SCL */
+	PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1),
+
+	/* E0  : CLK_24M_UCAM */
+	PAD_NC(GPP_E0, NONE),
+	/* E2  : CLK_24M_WCAM */
+	PAD_NC(GPP_E2, NONE),
+	/* E11 : AP_I2C_SUB_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_E11, NONE, PLTRST, LEVEL, NONE),
+
+	/* H6  : AP_I2C_CAM_SDA */
+	PAD_NC(GPP_H6, NONE),
+	/* H7  : AP_I2C_CAM_SCL */
+	PAD_NC(GPP_H7, NONE),
+	/* H17 : WWAN_RST_L => LTE_RESET_R_ODL */
+	PAD_CFG_GPO(GPP_H17, 0, PLTRST),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
diff --git a/src/mainboard/google/dedede/variants/gooey/include/variant/ec.h b/src/mainboard/google/dedede/variants/gooey/include/variant/ec.h
new file mode 100644
index 0000000000..08870e0627
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/include/variant/ec.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+#endif
diff --git a/src/mainboard/google/dedede/variants/gooey/include/variant/gpio.h b/src/mainboard/google/dedede/variants/gooey/include/variant/gpio.h
new file mode 100644
index 0000000000..9078664608
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/include/variant/gpio.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */
diff --git a/src/mainboard/google/dedede/variants/gooey/memory/Makefile.inc b/src/mainboard/google/dedede/variants/gooey/memory/Makefile.inc
new file mode 100644
index 0000000000..d0960c7768
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/memory/Makefile.inc
@@ -0,0 +1,5 @@
+## SPDX-License-Identifier: GPL-2.0-or-later
+## This is an auto-generated file. Do not edit!!
+
+SPD_SOURCES =
+SPD_SOURCES += lp4x-spd-1.hex      # ID = 0(0b0000)  Parts = MT53E512M32D2NP-046 WT:E, K4U6E3S4AA-MGCR, H9HCNNNBKMMLXR-NEE
diff --git a/src/mainboard/google/dedede/variants/gooey/memory/dram_id.generated.txt b/src/mainboard/google/dedede/variants/gooey/memory/dram_id.generated.txt
new file mode 100644
index 0000000000..0df7bfc8d6
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/memory/dram_id.generated.txt
@@ -0,0 +1,4 @@
+DRAM Part Name                 ID to assign
+MT53E512M32D2NP-046 WT:E       0 (0000)
+K4U6E3S4AA-MGCR                0 (0000)
+H9HCNNNBKMMLXR-NEE             0 (0000)
diff --git a/src/mainboard/google/dedede/variants/gooey/memory/mem_list_variant.txt b/src/mainboard/google/dedede/variants/gooey/memory/mem_list_variant.txt
new file mode 100644
index 0000000000..47159f8f8e
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/memory/mem_list_variant.txt
@@ -0,0 +1,3 @@
+MT53E512M32D2NP-046 WT:E
+K4U6E3S4AA-MGCR
+H9HCNNNBKMMLXR-NEE
diff --git a/src/mainboard/google/dedede/variants/gooey/overridetree.cb b/src/mainboard/google/dedede/variants/gooey/overridetree.cb
new file mode 100644
index 0000000000..9b291fbf4f
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/overridetree.cb
@@ -0,0 +1,324 @@
+chip soc/intel/jasperlake
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| I2C0              | Trackpad                  |
+	#| I2C1              | Digitizer                 |
+	#| I2C2              | Touchscreen, Stylus       |
+	#| I2C4              | Audio                     |
+	#| I2C5              | P-Sensor                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[4] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+		},
+	}"
+
+	# USB Port Configuration
+	register "usb2_ports[4]" = "USB2_PORT_EMPTY"		# Not Used
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"	# UF Camera
+	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"	# WF Camera
+
+	register "SerialIoI2cMode" = "{
+		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C3]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
+	}"
+
+	register "SerialIoGSpiMode[PchSerialIoIndexGSPI0]" = "PchSerialIoDisabled" # Disable GSPI0
+	register "SerialIoGSpiCsMode[PchSerialIoIndexGSPI0]" = "0"
+
+	# Enable Acoustic noise mitigation and set slew rate to 1/8
+	# Rest of the parameters are 0 by default.
+	register "AcousticNoiseMitigation" = "1"
+	register "SlowSlewRate" = "SlewRateFastBy8"
+	register "FastPkgCRampDisable" = "1"
+
+	# Set xHCI LFPS period sampling off time to 0 ms
+	register "xhci_lfps_sampling_offtime_ms" = "0"
+
+	device domain 0 on
+		device pci 04.0 on
+			chip drivers/intel/dptf
+				## Passive Policy
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU, CPU,           90, 10000),
+					[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000),
+					[2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 15000)
+				}"
+
+				## Critical Policy
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,           105, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 90, SHUTDOWN)
+				}"
+
+				## Power Limits Control
+				register "controls.power_limits" = "{
+					.pl1 = {
+						.min_power = 3000,
+						.max_power = 6000,
+						.time_window_min = 1 * MSECS_PER_SEC,
+						.time_window_max = 1 * MSECS_PER_SEC,
+						.granularity = 200,
+					},
+					.pl2 = {
+						.min_power = 20000,
+						.max_power = 20000,
+						.time_window_min = 1 * MSECS_PER_SEC,
+						.time_window_max = 1 * MSECS_PER_SEC,
+						.granularity = 1000,
+					}
+				}"
+
+				register "options.tsr[0].desc" = ""Memory""
+				register "options.tsr[1].desc" = ""Charger""
+
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 3000 },
+					[1] = {  24, 2000 },
+					[2] = {  16, 1500 },
+					[3] = {   8, 1000 }
+				}"
+
+				device generic 0 on end
+			end
+		end # SA Thermal device
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				register "desc" = ""Root Hub""
+				register "type" = "UPC_TYPE_HUB"
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-A Port""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""LTE""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "has_power_resource" = "1"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)"
+						register "reset_off_delay_ms" = "10"
+						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)"
+						register "enable_delay_ms" = "20"
+						device usb 2.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""UFCamera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""WFCamera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-A Port""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 3.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""LTE""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.3 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 15.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+				register "wake" = "GPE0_DW0_03"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""PNP0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
+				register "generic.wake" = "GPE0_DW0_03"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 0x2c on end
+			end
+		end # I2C 0
+		device pci 15.2 on
+			chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_C12)"
+				register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
+				register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+				register "generic.reset_delay_ms" = "180"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.stop_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
+				register "generic.stop_delay_ms" = "20"
+				register "generic.stop_off_delay_ms" = "2"
+				register "generic.enable_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 0x5d on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN901C""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.stop_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
+				register "generic.stop_delay_ms" = "280"
+				register "generic.stop_off_delay_ms" = "2"
+				register "generic.enable_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+		end # I2C 2
+		device pci 15.3 off  end # I2C 3
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""10EC1015""
+				register "desc" = ""Realtek SPK AMP L""
+				register "uid" = "0"
+				device i2c 28 on
+					probe AUDIO_AMP RT1015_I2C
+					probe AUDIO_AMP UNPROVISIONED
+				end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""10EC1015""
+				register "desc" = ""Realtek SPK AMP R""
+				register "uid" = "1"
+				device i2c 29 on
+					probe AUDIO_AMP RT1015_I2C
+					probe AUDIO_AMP UNPROVISIONED
+				end
+			end
+		end # I2C 4
+		device pci 19.1 on
+			chip drivers/i2c/sx9324
+				register "desc" = ""SAR Proximity Sensor""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E11_IRQ)"
+				register "uid" = "2"
+				register "reg_gnrl_ctrl0" = "0x0a"
+				register "reg_gnrl_ctrl1" = "0x22"
+				register "reg_afe_ctrl0" = "0x20"
+				register "reg_afe_ctrl3" = "0x01"
+				register "reg_afe_ctrl4" = "0x47"
+				register "reg_afe_ctrl6" = "0x00"
+				register "reg_afe_ctrl7" = "0x47"
+				register "reg_afe_ctrl8" = "0x12"
+				register "reg_afe_ctrl9" = "0x0f"
+				register "reg_afe_ph0" = "0x37"
+				register "reg_afe_ph1" = "0x29"
+				register "reg_afe_ph2" = "0x1f"
+				register "reg_afe_ph3" = "0x3d"
+				register "reg_prox_ctrl0" = "0x0b"
+				register "reg_prox_ctrl1" = "0x0b"
+				register "reg_prox_ctrl2" = "0x20"
+				register "reg_prox_ctrl3" = "0x20"
+				register "reg_prox_ctrl4" = "0x0c"
+				register "reg_prox_ctrl5" = "0x00"
+				register "reg_prox_ctrl6" = "0x2d"
+				register "reg_prox_ctrl7" = "0xc0"
+				register "reg_adv_ctrl0" = "0x00"
+				register "reg_adv_ctrl1" = "0x00"
+				register "reg_adv_ctrl2" = "0x00"
+				register "reg_adv_ctrl3" = "0x00"
+				register "reg_adv_ctrl4" = "0x00"
+				register "reg_adv_ctrl5" = "0x05"
+				register "reg_adv_ctrl6" = "0x00"
+				register "reg_adv_ctrl7" = "0x00"
+				register "reg_adv_ctrl8" = "0x00"
+				register "reg_adv_ctrl9" = "0x00"
+				register "reg_adv_ctrl10" = "0x00"
+				register "reg_adv_ctrl11" = "0x00"
+				register "reg_adv_ctrl12" = "0x00"
+				register "reg_adv_ctrl13" = "0x00"
+				register "reg_adv_ctrl14" = "0x80"
+				register "reg_adv_ctrl15" = "0x0c"
+				register "reg_adv_ctrl16" = "0x04"
+				register "reg_adv_ctrl17" = "0x70"
+				register "reg_adv_ctrl18" = "0x40"
+				register "reg_adv_ctrl19" = "0x00"
+				register "reg_adv_ctrl20" = "0x00"
+				register "reg_irq_msk" = "0x6f"
+				register "reg_irq_cfg0" = "0x00"
+				register "reg_irq_cfg1" = "0x80"
+				register "reg_irq_cfg2" = "0x00"
+				device i2c 28 on end
+			end
+		end # I2C 5
+		device pci 1f.0 on
+			chip drivers/pc80/tpm
+				device pnp 0c31.0 on end # Discrete TPM
+			end # chip drivers/pc80/tpm
+		end # PCH eSPI
+		device pci 1e.2 off end # GSPI 0
+		device pci 1f.3 on
+			chip drivers/generic/alc1015
+				register "sdb" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
+				device generic 0 on
+					probe AUDIO_AMP RT1015P_AUTO
+				end
+			end
+		end # Intel HDA
+	end
+end
diff --git a/src/mainboard/google/dedede/variants/gooey/variant.c b/src/mainboard/google/dedede/variants/gooey/variant.c
new file mode 100644
index 0000000000..2540fc7f2a
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/gooey/variant.c
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <acpi/acpi.h>
+#include <baseboard/variants.h>
+#include <delay.h>
+#include <gpio.h>
+
+static void power_off_lte_module(void)
+{
+	gpio_output(GPP_H17, 0);
+	mdelay(10);
+	gpio_output(GPP_A10, 0);
+}
+
+void variant_smi_sleep(u8 slp_typ)
+{
+	/*
+	 * Once the FW_CONFIG is provisioned, power off LTE module only under
+	 * the situation where it is stuffed.
+	 */
+	if (slp_typ == ACPI_S5)
+		power_off_lte_module();
+}