diff options
| author | Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> | 2023-10-08 05:34:22 +0000 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2023-10-23 12:59:05 +0000 |
| commit | 8ce19f54c7d3292631d6eb2db0d63923d742665a (patch) | |
| tree | a8cce46a366e7ec03c341b6f158d2ca757e003fe /src/mainboard/google/brya/variants | |
| parent | 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94 (diff) | |
mb/google/nissa/var/gothrax: Supplement register settings for SX9324 P-sensor
Set the following register value to make SX9324 work normally
"ph0_pin" = "{1, 3, 3}"
"ph1_pin" = "{3, 2, 1}"
"ph2_pin" = "{3, 3, 1}"
"ph3_pin" = "{1, 3, 3}"
"ph01_resolution" = "512"
"ph23_resolution" = "1024"
"startup_sensor" = "1"
"ph01_proxraw_strength" = "2"
"ph23_proxraw_strength" = "2"
"avg_pos_strength" = "256"
"cs_idle_sleep" = ""gnd""
"int_comp_resistor" = ""lowest""
"input_precharge_resistor_ohms" = "4000"
"input_analog_gain" = "3"
BUG=b:295109511
BRANCH=None
TEST=emerge-nissa coreboot chromeos-bootimage & Check sar sensor data
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: Ib15f12d754fec8b379afd702b27d0701fac78072
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Diffstat (limited to 'src/mainboard/google/brya/variants')
| -rw-r--r-- | src/mainboard/google/brya/variants/gothrax/overridetree.cb | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/gothrax/overridetree.cb b/src/mainboard/google/brya/variants/gothrax/overridetree.cb index 552c140e1d..87a2b48919 100644 --- a/src/mainboard/google/brya/variants/gothrax/overridetree.cb +++ b/src/mainboard/google/brya/variants/gothrax/overridetree.cb @@ -271,6 +271,21 @@ chip soc/intel/alderlake register "reg_adv_ctrl18" = "0x33" register "reg_adv_ctrl19" = "0xf0" register "reg_adv_ctrl20" = "0xf0" + + register "ph0_pin" = "{1, 3, 3}" + register "ph1_pin" = "{3, 2, 1}" + register "ph2_pin" = "{3, 3, 1}" + register "ph3_pin" = "{1, 3, 3}" + register "ph01_resolution" = "512" + register "ph23_resolution" = "1024" + register "startup_sensor" = "1" + register "ph01_proxraw_strength" = "2" + register "ph23_proxraw_strength" = "2" + register "avg_pos_strength" = "256" + register "cs_idle_sleep" = ""gnd"" + register "int_comp_resistor" = ""lowest"" + register "input_precharge_resistor_ohms" = "4000" + register "input_analog_gain" = "3" device i2c 28 on end end end |