mb/google/brya/variant/taeko: Update devicetree settings

Based on schematic and gpio table of taeko, generate overridetree.cb
settings for taeko.

BUG=b:195494281
TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage

Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I96aaf48284a226edc39115f870bf0f3dd83ab8b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

1 files changed, 277 insertions, 2 deletions

diff --git a/src/mainboard/google/brya/variants/taeko/overridetree.cb b/src/mainboard/google/brya/variants/taeko/overridetree.cb
index 4f2c04a57a..a8a5e83f71 100644
--- a/src/mainboard/google/brya/variants/taeko/overridetree.cb
+++ b/src/mainboard/google/brya/variants/taeko/overridetree.cb
@@ -1,6 +1,281 @@
 chip soc/intel/alderlake
+	register "usb2_ports[1]" = "USB2_PORT_EMPTY"	# Disable Port 1
+	register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC2)"	# DB USB2_C1
+	register "usb2_ports[3]" = "USB2_PORT_EMPTY"	# Disable M.2 WWAN
+	register "usb3_ports[3]" = "USB3_PORT_EMPTY"	# Disable M.2 WWAN
 
-        device domain 0 on
-        end
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| chipset_lockdown  | CHIPSET_LOCKDOWN_COREBOOT |
+	#| GSPI1             | Fingerprint MCU           |
+	#| I2C0              | Audio                     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | HPS                       |
+	#| I2C3              | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config.chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT"
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[3] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+		},
+	}"
+	# I2C Port Config
+	register "SerialIoI2cMode" = "{
+		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
+	}"
+	device domain 0 on
+		device ref tbt_pcie_rp0 off end
+		device ref tbt_pcie_rp1 off end
+		device ref tbt_pcie_rp2 off end
+		device ref i2c0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on
+				end
+			end
+		end
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				# Parameter T5 >= 180ms
+				register "generic.reset_delay_ms" = "180"
+				# Parameter T2 >= 1ms
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.enable_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				# Parameter T1 >= 20ms
+				register "generic.enable_delay_ms" = "20"
+				register "generic.stop_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)"
+				# Parameter T4 >= 1ms
+				register "generic.stop_off_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 5d on end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0001""
+				register "desc" = ""ELAN Touchscreen""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "probed" = "1"
+				register "reset_gpio" =
+						"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "reset_delay_ms" = "20"
+				register "enable_gpio" =
+						"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "enable_delay_ms" = "1"
+				register "has_power_resource" = "1"
+				device i2c 10 on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""PNP0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "generic.wake" = "GPE0_DW2_15"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 2c on end
+			end
+		end
+		device ref hda on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98357A""
+				register "sdmode_gpio" =
+						"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
 
+			chip drivers/intel/soundwire
+				device generic 0 on
+					chip drivers/soundwire/alc5682
+						# SoundWire Link 0 ID 1
+						register "desc" = ""Headset Codec""
+						device generic 0.1 on end
+					end
+					chip drivers/soundwire/max98373
+						# SoundWire Link 2 ID 3
+						register "desc" = ""Left Speaker Amp""
+						device generic 2.3 on end
+					end
+					chip drivers/soundwire/max98373
+						# SoundWire Link 2 ID 7
+						register "desc" = ""Right Speaker Amp""
+						device generic 2.7 on end
+					end
+				end
+			end
+		end
+		device ref pcie_rp5 on
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H20)"
+				register "srcclk_pin" = "2"
+				device generic 0 on end
+			end
+			register "pch_pcie_rp[PCH_RP(5)]" = "{
+				.clk_src = 2,
+				.clk_req = 2,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+		end
+		device ref pcie_rp6 off end
+		device ref pcie_rp8 on
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
+				register "srcclk_pin" = "3"
+				device generic 0 on end
+			end
+		end
+		device ref pcie_rp9 on
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D11)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B4)"
+				register "srcclk_pin" = "1"
+				device generic 0 on end
+			end
+		end
+		device ref gspi1 on
+			chip drivers/spi/acpi
+				register "name" = ""CRFP""
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "uid" = "1"
+				register "compat_string" = ""google,cros-ec-spi""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				device spi 0 on end
+			end # FPMCU
+		end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "1"
+						register "usb3_port_number" = "1"
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "3"
+						register "usb3_port_number" = "3"
+						device generic 2 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref tcss_usb3_port3 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port6 on
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb2_port9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port10 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb3_port1 on end
+					end
+				end
+			end
+		end
+	end
 end