brya: add new skolas variant

Add a new skolas variant, which is a variant of brya's skolas
baseboard.

BUG=b:242869976
BRANCH=firmware-brya-14505.B
TEST=none

Change-Id: I7f9f0389d8b1bf75d8652cbcc9d0c15d3a529802
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

1 files changed, 204 insertions, 0 deletions

diff --git a/src/mainboard/google/brya/variants/skolas/gpio.c b/src/mainboard/google/brya/variants/skolas/gpio.c
new file mode 100644
index 0000000000..251348beaa
--- /dev/null
+++ b/src/mainboard/google/brya/variants/skolas/gpio.c
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <soc/gpio.h>
+
+static const struct pad_config board_id0_1_overrides[] = {
+	/* B2  : VRALERT# ==> NC */
+	PAD_NC(GPP_B2, NONE),
+	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
+	PAD_CFG_NF_LOCK(GPP_B7, NONE, NF2, LOCK_CONFIG),
+	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
+	PAD_CFG_NF_LOCK(GPP_B8, NONE, NF2, LOCK_CONFIG),
+	/* B15 : TIME_SYNC0 ==> NC */
+	PAD_NC(GPP_B15, NONE),
+	/* C3  : SML0CLK ==> NC */
+	PAD_NC(GPP_C3, NONE),
+	/* C4  : SML0DATA ==> NC */
+	PAD_NC(GPP_C4, NONE),
+	/* D13 : ISH_UART0_RXD ==> PCH_I2C_CAM_SDA */
+	PAD_CFG_NF(GPP_D13, NONE, DEEP, NF3),
+	/* D14 : ISH_UART0_TXD ==> PCH_I2C_CAM_SCL */
+	PAD_CFG_NF(GPP_D14, NONE, DEEP, NF3),
+	/* F19 : SRCCLKREQ6# ==> WWAN_SIM1_DET_OD */
+	PAD_CFG_GPI(GPP_F19, UP_20K, DEEP),
+	/* F20 : EXT_PWR_GATE# ==> HPS_RST_R */
+	PAD_CFG_GPO(GPP_F20, 0, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> WAKE_ON_WWAN_ODL */
+	PAD_NC(GPP_F21, NONE),
+	/* H21 : IMGCLKOUT2 ==> WLAN_INT_L */
+	PAD_CFG_GPI_APIC(GPP_H21, NONE, DEEP, EDGE_SINGLE, NONE),
+	/* GPD2: LAN_WAKE# ==> NC */
+	PAD_NC(GPD2, NONE),
+};
+
+/* Early pad configuration in bootblock for board id < 2 */
+static const struct pad_config early_gpio_table[] = {
+	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
+	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
+	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
+	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
+	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
+	/*
+	 * D1  : ISH_GP1 ==> FP_RST_ODL
+	 * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
+	 * To ensure proper power sequencing for the FPMCU device, reset signal is driven low
+	 * early on in bootblock, followed by enabling of power. Reset signal is deasserted
+	 * later on in ramstage. Since reset signal is asserted in bootblock, it results in
+	 * FPMCU not working after a S3 resume. This is a known issue.
+	 */
+	PAD_CFG_GPO(GPP_D1, 0, DEEP),
+	/* D2  : ISH_GP2 ==> EN_FP_PWR */
+	PAD_CFG_GPO(GPP_D2, 1, DEEP),
+	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E0, 0, DEEP),
+	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
+	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
+	/* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E16, 0, DEEP),
+	/* E15 : RSVD_TP ==> PCH_WP_OD */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
+	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
+	PAD_CFG_GPI(GPP_F18, NONE, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> NC */
+	PAD_NC(GPP_F21, NONE),
+	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
+	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
+	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
+	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
+	/* H13 : I2C7_SCL ==> EN_PP3300_SD */
+	PAD_NC(GPP_H13, UP_20K),
+};
+
+/* Early pad configuration in bootblock for board id 2 */
+static const struct pad_config early_gpio_table_id2[] = {
+	/* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */
+	PAD_CFG_GPO(GPP_A12, 1, DEEP),
+	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
+	/* B4  : PROC_GP3 ==> SSD_PERST_L */
+	PAD_CFG_GPO(GPP_B4, 0, DEEP),
+	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
+	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
+	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
+	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
+	/*
+	 * D1  : ISH_GP1 ==> FP_RST_ODL
+	 * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
+	 * To ensure proper power sequencing for the FPMCU device, reset signal is driven low
+	 * early on in bootblock, followed by enabling of power. Reset signal is deasserted
+	 * later on in ramstage. Since reset signal is asserted in bootblock, it results in
+	 * FPMCU not working after a S3 resume. This is a known issue.
+	 */
+	PAD_CFG_GPO(GPP_D1, 0, DEEP),
+	/* D2  : ISH_GP2 ==> EN_FP_PWR */
+	PAD_CFG_GPO(GPP_D2, 1, DEEP),
+	/* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */
+	PAD_CFG_GPO(GPP_D11, 1, DEEP),
+	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E0, 0, DEEP),
+	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
+	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
+	/* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E16, 0, DEEP),
+	/* E15 : RSVD_TP ==> PCH_WP_OD */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
+	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
+	PAD_CFG_GPI(GPP_F18, NONE, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */
+	PAD_CFG_GPO(GPP_F21, 0, DEEP),
+	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
+	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
+	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
+	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
+	/* H13 : I2C7_SCL ==> EN_PP3300_SD */
+	PAD_NC(GPP_H13, UP_20K),
+};
+
+/* Early pad configuration in bootblock for board id 4 */
+static const struct pad_config early_gpio_table_id4[] = {
+	/* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */
+	PAD_CFG_GPO(GPP_A12, 1, DEEP),
+	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
+	/* B4  : PROC_GP3 ==> SSD_PERST_L */
+	PAD_CFG_GPO(GPP_B4, 0, DEEP),
+	/* H6  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
+	PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),
+	/* H7  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
+	PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),
+	/*
+	 * D1  : ISH_GP1 ==> FP_RST_ODL
+	 * FP_RST_ODL comes out of reset as hi-z and does not have an external
+	 * pull-down. To ensure proper power sequencing for the FPMCU device,
+	 * reset signal is driven low early on in bootblock, followed by
+	 * enabling of power. Reset signal is deasserted later on in ramstage.
+	 * Since reset signal is asserted in bootblock, it results in FPMCU not
+	 * working after a S3 resume. This is a known issue.
+	 */
+	PAD_CFG_GPO(GPP_D1, 0, DEEP),
+	/* D2  : ISH_GP2 ==> EN_FP_PWR */
+	PAD_CFG_GPO(GPP_D2, 1, DEEP),
+	/* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */
+	PAD_CFG_GPO(GPP_D11, 1, DEEP),
+	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E0, 0, DEEP),
+	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
+	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
+	/* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */
+	PAD_CFG_GPO(GPP_E16, 0, DEEP),
+	/* E15 : RSVD_TP ==> PCH_WP_OD */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
+	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
+	PAD_CFG_GPI(GPP_F18, NONE, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */
+	PAD_CFG_GPO(GPP_F21, 0, DEEP),
+	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
+	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
+	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
+	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
+	/* H13 : I2C7_SCL ==> EN_PP3300_SD */
+	PAD_NC(GPP_H13, UP_20K),
+};
+
+static const struct pad_config romstage_gpio_table[] = {
+	/* B4  : PROC_GP3 ==> SSD_PERST_L */
+	PAD_CFG_GPO(GPP_B4, 1, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (set here for correct power sequencing) */
+	PAD_CFG_GPO(GPP_F21, 1, DEEP),
+};
+
+const struct pad_config *variant_gpio_override_table(size_t *num)
+{
+	const uint32_t id = board_id();
+	if (id == BOARD_ID_UNKNOWN || id < 2) {
+		*num = ARRAY_SIZE(board_id0_1_overrides);
+		return board_id0_1_overrides;
+	}
+
+	*num = 0;
+	return NULL;
+}
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	const uint32_t id = board_id();
+	if (id == BOARD_ID_UNKNOWN || id < 2) {
+		*num = ARRAY_SIZE(early_gpio_table);
+		return early_gpio_table;
+	} else if (id >= 4) {
+		*num = ARRAY_SIZE(early_gpio_table_id4);
+		return early_gpio_table_id4;
+	}
+
+	*num = ARRAY_SIZE(early_gpio_table_id2);
+	return early_gpio_table_id2;
+}
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}