diff options
| author | Matt DeVillier <matt.devillier@gmail.com> | 2024-01-16 18:46:20 -0600 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2024-01-25 14:50:49 +0000 |
| commit | cf29efabbad08098e8f0b51eb25c22661dd62ba5 (patch) | |
| tree | 172437bd3eadca117801feea9ecf7e636e60a76f /src/mainboard/google/brya/variants/anahera | |
| parent | b6cbfa977f63d57d5d6b9e9f7c1cef30162f575a (diff) | |
mb/google/brya/var/*: Ensure LCD device has a valid address
Some variants added the generic gfx driver with an LCD device without
specifying the address, which is required for the backlight controls
to be functional under Windows. Add the address value where missing.
Address value used (0x80010400) is same as on other Brya variants which
did properly set it, and is taken from the ACPI 6.5 spec section B.4.2,
_DOD (display output device enumeration), table B-2:
- bit 31 = use the ACPI-defined (vs vendor-defined) bit scheme for bits
15-0
- bit 16 = platform firmware can detect the device
- bit 10 = display type is internal/integrated flat panel (aka LCD)
TEST=build/boot Win11 on google/brya (osiris), verify ACPI backlight
controls functional.
Change-Id: Id24e330cfb7c993d12665a704e1ca78e2e38874f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Diffstat (limited to 'src/mainboard/google/brya/variants/anahera')
| -rw-r--r-- | src/mainboard/google/brya/variants/anahera/overridetree.cb | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/anahera/overridetree.cb b/src/mainboard/google/brya/variants/anahera/overridetree.cb index 0a72246e12..1961e09c58 100644 --- a/src/mainboard/google/brya/variants/anahera/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera/overridetree.cb @@ -118,6 +118,8 @@ chip soc/intel/alderlake register "device_count" = "6" # DDIA for eDP register "device[0].name" = ""LCD"" + # Internal panel on the first port of the graphics chip + register "device[0].addr" = "0x80010400" # DDIB for HDMI register "device[1].name" = ""DD01"" # TCP0 (DP-1) for port C0 |