mb/clevo: Rename l140cu to cml-u

In addition to CB:45664, rename clevo/l140cu to clevo/cml-u being able
to add more variants under a generic mainboard later.

Change-Id: I9c16e24830ebb80752df302aa2e63d9df8edad95
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45665
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

9 files changed, 609 insertions, 0 deletions

diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc b/src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc
new file mode 100644
index 0000000000..3d742d6e13
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc
@@ -0,0 +1,4 @@
+bootblock-y += bootblock.c
+ramstage-y += ramstage.c
+ramstage-y += hda_verb.c
+SPD_SOURCES  = samsung-K4AAG165WA-BCTD
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt b/src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt
new file mode 100644
index 0000000000..86230320af
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt
@@ -0,0 +1,2 @@
+Board name: L140CU
+Release year: 2020
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c b/src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c
new file mode 100644
index 0000000000..2b673021b5
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootblock_common.h>
+#include <gpio.h>
+#include "gpio.h"
+
+void bootblock_mainboard_init(void)
+{
+	gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table));
+}
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/data.vbt b/src/mainboard/clevo/cml-u/variants/l140cu/data.vbt
new file mode 100644
index 0000000000..f14d8073e9
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/data.vbt
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb
new file mode 100644
index 0000000000..b1899417b9
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb
@@ -0,0 +1,207 @@
+chip soc/intel/cannonlake
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		/* Touchpad */
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 80,
+			.fall_time_ns = 110,
+		},
+	}"
+
+	# Send an extra VR mailbox command for the PS4 exit issue
+	register "SendVrMbxCmd" = "2"
+
+# CPU (soc/intel/cannonlake/cpu.c)
+	# Power limit
+	register "power_limits_config" = "{
+		.tdp_pl1_override = 20,
+		.tdp_pl2_override = 30,
+	}"
+
+	# Enable "Intel Speed Shift Technology"
+	register "speed_shift_enable" = "1"
+
+	# Enable Enhanced Intel SpeedStep
+	register "eist_enable" = "1"
+
+# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
+	register "SaGv" = "SaGv_Enabled"
+	#register "enable_c6dram" = "1"
+
+# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
+	# Serial I/O
+	register "SerialIoDevMode" = "{
+		[PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad
+		[PchSerialIoIndexUART2] = PchSerialIoSkipInit, // LPSS UART
+	}"
+
+	# Misc
+	register "AcousticNoiseMitigation" = "1"
+	#register "dmipwroptimize" = "1"
+	#register "satapwroptimize" = "1"
+
+	# Power
+	register "PchPmSlpS3MinAssert" = "3"		# 50ms
+	register "PchPmSlpS4MinAssert" = "1"		# 1s
+	register "PchPmSlpSusMinAssert" = "2"		# 500ms
+	register "PchPmSlpAMinAssert" = "4"		# 2s
+
+	# Thermal
+	register "tcc_offset" = "12"
+
+# PM Util (soc/intel/cannonlake/pmutil.c)
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route. i.e. If this route changes then the affected GPE
+	# offset bits also need to be changed.
+	# sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG)
+	register "gpe0_dw0" = "PMC_GPP_C"
+	register "gpe0_dw1" = "PMC_GPP_D"
+	register "gpe0_dw2" = "PMC_GPP_E"
+
+# Actual device tree
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	device domain 0 on
+		subsystemid 0x1558 0x1401 inherit
+		device pci 00.0 on  end # Host Bridge
+		device pci 02.0 on  end # Integrated Graphics Device
+		device pci 04.0 on      # SA Thermal device
+			register "Device4Enable" = "1"
+		end
+		device pci 12.0 on  end # Thermal Subsystem
+		device pci 12.5 off end # UFS SCS
+		device pci 12.6 off end # GSPI #2
+		device pci 13.0 off end # Integrated Sensor Hub
+		device pci 14.0 on	# USB xHCI
+			# USB2
+			register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)"		# Type-A port 1
+			register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)"		# Type-C port 2
+			register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"		# Type-A port 3
+			register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)"		# Camera
+			register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"		# Bluetooth
+			# USB3
+			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"		# Type-A port 1
+			register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"		# Type-C port 2
+			register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)"		# Type-A port 3
+		end
+		device pci 14.1 off end # USB xDCI (OTG)
+		chip drivers/intel/wifi # CNVi wifi
+			register "wake" = "GPE0_PME_B0"
+			device pci 14.3 on end
+		end
+		device pci 14.5 off end # SDCard
+		device pci 15.0 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN040D""
+				register "generic.desc" = ""ELAN Touchpad""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 15 on end
+			end
+		end # I2C #0
+		device pci 15.1 off end # I2C #1
+		device pci 15.2 off end # I2C #2
+		device pci 15.3 off end # I2C #3
+		device pci 16.0 off end # Management Engine Interface 1
+		device pci 16.1 off end # Management Engine Interface 2
+		device pci 16.2 off end # Management Engine IDE-R
+		device pci 16.3 off end # Management Engine KT Redirection
+		device pci 16.4 off end # Management Engine Interface 3
+		device pci 16.5 off end # Management Engine Interface 4
+		device pci 17.0 on	# SATA
+			register "SataMode" = "Sata_AHCI"
+			register "SataSalpSupport" = "1"
+			# Port 2 (J_SSD2)
+			register "SataPortsEnable[1]" = "1"
+			register "SataPortsDevSlp[1]" = "1"
+			# Port 3 (J_SSD1)
+			register "SataPortsEnable[2]" = "1"
+			register "SataPortsDevSlp[2]" = "1"
+		end
+		device pci 19.0 off end # I2C #4
+		device pci 19.1 off end # I2C #5
+		device pci 19.2 on  end # UART #2
+		device pci 1a.0 off end # eMMC
+		device pci 1c.0 off end # PCI Express Port 1
+		device pci 1c.1 off end # PCI Express Port 2
+		device pci 1c.2 off end # PCI Express Port 3
+		device pci 1c.3 off end # PCI Express Port 4
+		device pci 1c.4 off end # PCI Express Port 5
+		device pci 1c.5 on	# PCI Express Port 6
+			device pci 00.0 on end # x1 Card reader
+			register "PcieRpEnable[5]" = "1"
+			register "PcieRpLtrEnable[5]" = "1"
+			register "PcieClkSrcUsage[3]" = "5"
+			register "PcieClkSrcClkReq[3]" = "3"
+			register "PcieRpSlotImplemented[5]" = "1"
+		end
+		device pci 1c.6 off end # PCI Express Port 7
+		device pci 1c.7 on	# PCI Express Port 8
+			device pci 00.0 on end # x1 M.2/E 2230 (J_WLAN1)
+			register "PcieRpEnable[7]" = "1"
+			register "PcieRpLtrEnable[7]" = "1"
+			register "PcieClkSrcUsage[2]" = "7"
+			register "PcieClkSrcClkReq[2]" = "2"
+			register "PcieRpSlotImplemented[7]" = "1"
+			chip drivers/intel/wifi
+				device pci 00.0 on end
+			end
+			smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230 (J_WLAN1)" "SlotDataBusWidth1X"
+		end
+		device pci 1d.0 on	# PCI Express Port 9
+			device pci 00.0 on end # x4 M.2/M 2280 (J_SSD2)
+			register "PcieRpEnable[8]" = "1"
+			register "PcieRpLtrEnable[8]" = "1"
+			register "PcieClkSrcUsage[4]" = "8"
+			register "PcieClkSrcClkReq[4]" = "4"
+			register "PcieRpSlotImplemented[8]" = "1"
+			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD2)" "SlotDataBusWidth4X"
+		end
+		device pci 1d.1 off end # PCI Express Port 10
+		device pci 1d.2 off end # PCI Express Port 11
+		device pci 1d.3 off end # PCI Express Port 12
+		device pci 1d.4 on	# PCI Express Port 13
+			device pci 00.0 on end # x4 M.2/M 2280 (J_SSD1)
+			register "PcieRpEnable[12]" = "1"
+			register "PcieRpLtrEnable[12]" = "1"
+			register "PcieClkSrcUsage[5]" = "12"
+			register "PcieClkSrcClkReq[5]" = "5"
+			register "PcieRpSlotImplemented[12]" = "1"
+			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD1)" "SlotDataBusWidth4X"
+		end
+		device pci 1d.5 off end # PCI Express Port 14
+		device pci 1d.6 off end # PCI Express Port 15
+		device pci 1d.7 off end # PCI Express Port 16
+		device pci 1e.0 off end # UART #0
+		device pci 1e.1 off end # UART #1
+		device pci 1e.2 off end # GSPI #0
+		device pci 1e.3 off end # GSPI #1
+		device pci 1f.0 on	# LPC Interface
+			# LPC configuration from lspci -s 1f.0 -xxx
+			# Address 0x84: Decode 0x80 - 0x8F (Port 80)
+			register "gen1_dec" = "0x000c0081"
+			# Address 0x88: Decode 0x68 - 0x6F (PMC)
+			register "gen2_dec" = "0x00040069"
+			# Address 0x8C: Decode 0xE00 - 0xEFF (AP/EC command)
+			register "gen3_dec" = "0x00fc0E01"
+			# Address 0x90: Decode 0xF00 - 0xFFF (AP/EC debug)
+			register "gen4_dec" = "0x00fc0F01"
+			chip drivers/pc80/tpm	# TPM
+				device pnp 0c31.0 on  end
+			end
+		end
+		device pci 1f.1 off end # P2SB
+		device pci 1f.2 off end # Power Management Controller
+		device pci 1f.3 on	# Intel HDA
+			register "PchHdaAudioLinkHda" = "1"
+		end
+		device pci 1f.4 on  end # SMBus
+		device pci 1f.5 on  end	# PCH SPI
+		device pci 1f.6 off end # GbE
+	end
+end
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/gpio.h b/src/mainboard/clevo/cml-u/variants/l140cu/gpio.h
new file mode 100644
index 0000000000..1f7d119947
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/gpio.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+#ifndef __ACPI__
+
+/* Name format: <pad name> / <net/pin name in schematics> */
+
+/* Early pad configuration in romstage. */
+static const struct pad_config early_gpio_table[] = {
+	PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),		/* UART2_RXD */
+	PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),		/* UART2_TXD */
+	PAD_NC(GPP_C22, UP_20K),
+	PAD_NC(GPP_C23, UP_20K),
+};
+
+/* Pad configuration in ramstage. */
+static const struct pad_config gpio_table[] = {
+	/* ------- GPIO Group GPD ------- */
+	PAD_NC(GPD0, NONE),
+	PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1),		/* ACPRESENT / AC_PRESENT */
+	PAD_NC(GPD2, UP_20K),
+	PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1),		/* PWRBTN# / PWR_BTN# */
+	PAD_CFG_NF(GPD4, NONE, DEEP, NF1),		/* SLP_S3# / SUSB#_PCH */
+	PAD_CFG_NF(GPD5, NONE, DEEP, NF1),		/* SLP_S4# / SUSC#_PCH */
+	PAD_NC(GPD6, UP_20K),
+	PAD_NC(GPD7, NONE),
+	PAD_CFG_NF(GPD8, NONE, DEEP, NF1),		/* SUSCLK / SUS_CLK */
+	PAD_NC(GPD9, UP_20K),
+	PAD_NC(GPD10, UP_20K),
+	PAD_NC(GPD11, UP_20K),
+
+	/* ------- GPIO Group GPP_A ------- */
+	PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1),		/* RCIN# / SB_KBCRST# */
+	PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1),		/* LAD0 / LPC_AD0 */
+	PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1),		/* LAD1 / LPC_AD1 */
+	PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1),		/* LAD2 / LPC_AD2 */
+	PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1),		/* LAD3 / LPC_AD3 */
+	PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),		/* LFRAME# / LPC_FRAME# */
+	PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),		/* SERIRQ */
+	PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1),		/* PIRQA# / TPM_PIRQ# */
+	PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),		/* CLKRUN# / PM_CLKRUN#
+							   Note: R209 is populated despite being
+							   marked no-stuff in schematic
+							 */
+	PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1),		/* CLKOUT_LPC0 / PCLK_KBC */
+	PAD_NC(GPP_A10, UP_20K),
+	PAD_NC(GPP_A11, UP_20K),			/* INTP_OUT
+							   (Type-C VBUS_SENSE; unused in cb)
+							 */
+	PAD_NC(GPP_A12, UP_20K),
+	PAD_NC(GPP_A13, UP_20K),			/* SUSWARN#
+							   (unused due to missing DeepSx support)
+							 */
+	PAD_NC(GPP_A14, UP_20K),
+	PAD_NC(GPP_A15, UP_20K),
+	PAD_NC(GPP_A16, UP_20K),
+	PAD_NC(GPP_A17, NONE),				/* LEDKB_DET#
+							   (unused in cb; all devices of that
+							   model have KB LED)
+							 */
+	PAD_NC(GPP_A18, UP_20K),
+	PAD_NC(GPP_A19, UP_20K),
+	PAD_CFG_GPO(GPP_A20, 0, DEEP),			/* GPP_A20 / TEST_R */
+	PAD_NC(GPP_A21, UP_20K),
+	PAD_NC(GPP_A22, UP_20K),
+	PAD_NC(GPP_A23, UP_20K),
+
+	/* ------- GPIO Group GPP_B ------- */
+	PAD_NC(GPP_B0, UP_20K),
+	PAD_NC(GPP_B1, UP_20K),
+	PAD_NC(GPP_B2, UP_20K),				/* CNVI_WAKE#
+							   (UART_WAKE# in M.2 spec; unused)
+							 */
+	PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST),/* GPP_B3 (touchpad interrupt) */
+	PAD_NC(GPP_B4, UP_20K),
+	PAD_NC(GPP_B5, UP_20K),
+	PAD_NC(GPP_B6, UP_20K),
+	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),		/* SRCCLKREQ2# / WLAN_CLKREQ# */
+	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1),		/* SRCCLKREQ3# / CARD_CLKREQ# */
+	PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),		/* SRCCLKREQ4# / SSD2_CLKREQ# */
+	PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),		/* SRCCLKREQ5# / SSD1_CLKREQ# */
+	PAD_NC(GPP_B11, NONE),
+	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),		/* SLP_S0# */
+	PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),		/* PLT_RST# */
+	PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),		/* SPKR / PCH_SPKR */
+	PAD_NC(GPP_B15, UP_20K),
+	PAD_NC(GPP_B16, UP_20K),
+	PAD_NC(GPP_B17, NONE),
+	PAD_NC(GPP_B18, UP_20K),
+	PAD_NC(GPP_B19, UP_20K),
+	PAD_NC(GPP_B20, UP_20K),
+	PAD_NC(GPP_B21, UP_20K),
+	PAD_NC(GPP_B22, UP_20K),
+	PAD_NC(GPP_B23, UP_20K),
+
+	/* ------- GPIO Group GPP_C ------- */
+	PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),		/* SMBCLK / SMB_CLK_DDR */
+	PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),		/* SMBDATA / SMB_DAT_DDR */
+	PAD_NC(GPP_C2, UP_20K),
+	PAD_NC(GPP_C3, UP_20K),
+	PAD_NC(GPP_C4, UP_20K),
+	PAD_NC(GPP_C5, UP_20K),
+	PAD_NC(GPP_C6, UP_20K),
+	PAD_NC(GPP_C7, UP_20K),
+	PAD_NC(GPP_C8, UP_20K),
+	PAD_NC(GPP_C9, UP_20K),
+	PAD_NC(GPP_C10, UP_20K),
+	PAD_NC(GPP_C11, UP_20K),
+	PAD_NC(GPP_C12, UP_20K),
+	PAD_CFG_GPO(GPP_C13, 1, PLTRST),		/* GPP_C13 / SSD1_PWR_DN# */
+	PAD_NC(GPP_C14, UP_20K),
+	PAD_NC(GPP_C15, UP_20K),
+	PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),		/* I2C0_SDA / T_SDA */
+	PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),		/* I2C0_SCL / T_SCL */
+	PAD_NC(GPP_C18, UP_20K),
+	PAD_NC(GPP_C19, UP_20K),
+	PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),		/* UART2_RXD */
+	PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),		/* UART2_TXD */
+	PAD_NC(GPP_C22, UP_20K),
+	PAD_NC(GPP_C23, UP_20K),
+
+	/* ------- GPIO Group GPP_D ------- */
+	PAD_NC(GPP_D0, UP_20K),
+	PAD_NC(GPP_D1, UP_20K),
+	PAD_NC(GPP_D2, UP_20K),
+	PAD_NC(GPP_D3, UP_20K),
+	PAD_NC(GPP_D4, UP_20K),
+	PAD_NC(GPP_D5, UP_20K),
+	PAD_NC(GPP_D6, UP_20K),
+	PAD_NC(GPP_D7, UP_20K),
+	PAD_CFG_GPO(GPP_D8, 1, DEEP),			/* SB_BLON */
+	PAD_CFG_GPI_SCI_LOW(GPP_D9, NONE, DEEP, LEVEL),	/* EC SWI# */
+	PAD_NC(GPP_D10, NONE),				/* DDR_TYPE_D10
+							   (unused; there is only one on-board
+							   ram type/model)
+							 */
+	PAD_NC(GPP_D11, NONE),				/* BOARD_ID
+							   (unused in cb; we already know the
+							   device model)
+							 */
+	PAD_NC(GPP_D12, UP_20K),
+	PAD_NC(GPP_D13, UP_20K),
+	PAD_CFG_GPO(GPP_D14, 1, PLTRST),		/* SSD2_PWR_DN# */
+	PAD_NC(GPP_D15, UP_20K),
+	PAD_NC(GPP_D16, UP_20K),
+	PAD_NC(GPP_D17, UP_20K),
+	PAD_NC(GPP_D18, UP_20K),
+	PAD_NC(GPP_D19, UP_20K),
+	PAD_NC(GPP_D20, UP_20K),
+	PAD_NC(GPP_D21, NONE),				/* TPM_DET#
+							   (currently unused in cb; there seem
+							   to be no devices without TPM)
+							 */
+	PAD_NC(GPP_D22, NONE),				/* DDR_TYPE_D22
+							   (unused in cb; there is only one
+							   on-board ram type)
+							 */
+	PAD_NC(GPP_D23, UP_20K),
+
+	/* ------- GPIO Group GPP_E ------- */
+	PAD_NC(GPP_E0, UP_20K),
+	PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),		/* SATAXPCIE1 / SATAGP1 */
+	PAD_CFG_NF(GPP_E2, NONE, DEEP, NF1),		/* SATAXPCIE2 / SATAGP2 */
+	PAD_NC(GPP_E3, UP_20K),
+	PAD_NC(GPP_E4, UP_20K),
+	PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),		/* DEVSLP1 */
+	PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1),		/* DEVSLP2 */
+	PAD_NC(GPP_E7, UP_20K),
+	PAD_NC(GPP_E8, NONE),
+	PAD_NC(GPP_E9, NONE),
+	PAD_NC(GPP_E10, NONE),
+	PAD_NC(GPP_E11, NONE),
+	PAD_NC(GPP_E12, NONE),
+	PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),		/* DDPB_HPD0 / MUX_HPD */
+	PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),		/* DDPC_HPD1 / HDMI_HPD */
+	PAD_CFG_GPI_SMI_LOW(GPP_E15, NONE, DEEP, EDGE_SINGLE),	/* EC SMI# */
+	PAD_CFG_GPI_SCI_LOW(GPP_E16, NONE, PLTRST, LEVEL),	/* EC SCI# */
+	PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),		/* EDP_HPD */
+	PAD_NC(GPP_E18, UP_20K),
+	PAD_NC(GPP_E19, NONE),
+	PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1),		/* DPPC_CTRLCLK / HDMI_CTRLCLK */
+	PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1),		/* DPPC_CTRLDATA / HDMI_CTRLDATA */
+	PAD_NC(GPP_E22, UP_20K),
+	PAD_NC(GPP_E23, UP_20K),
+
+	/* ------- GPIO Group GPP_F ------- */
+	PAD_NC(GPP_F0, UP_20K),
+	PAD_NC(GPP_F1, UP_20K),
+	PAD_NC(GPP_F2, UP_20K),
+	PAD_NC(GPP_F3, UP_20K),
+	PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1),		/* CNV_BRI_DT / CNVI_BRI_DT */
+	PAD_CFG_NF(GPP_F5, UP_20K, DEEP, NF1),		/* CNV_BRI_RSP / CNVI_BRI_RSP */
+	PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1),		/* CNV_RGI_DT / CNVI_RGI_DT */
+	PAD_CFG_NF(GPP_F7, UP_20K, DEEP, NF1),		/* CNV_RGI_RSP / CNVI_RGI_RSP */
+	PAD_NC(GPP_F8, UP_20K),
+	PAD_NC(GPP_F9, UP_20K),
+	PAD_NC(GPP_F10, UP_20K),
+	PAD_NC(GPP_F11, UP_20K),
+	PAD_NC(GPP_F12, UP_20K),
+	PAD_NC(GPP_F13, UP_20K),
+	PAD_NC(GPP_F14, UP_20K),
+	PAD_NC(GPP_F15, UP_20K),
+	PAD_NC(GPP_F16, UP_20K),
+	PAD_NC(GPP_F17, UP_20K),
+	PAD_NC(GPP_F18, UP_20K),
+	PAD_NC(GPP_F19, UP_20K),
+	PAD_NC(GPP_F20, UP_20K),
+	PAD_NC(GPP_F21, UP_20K),
+	PAD_NC(GPP_F22, UP_20K),
+	PAD_NC(GPP_F23, NONE),
+
+	/* ------- GPIO Group GPP_G ------- */
+	PAD_NC(GPP_G0, UP_20K),
+	PAD_NC(GPP_G1, UP_20K),
+	PAD_NC(GPP_G2, UP_20K),
+	PAD_NC(GPP_G3, UP_20K),
+	PAD_NC(GPP_G4, UP_20K),
+	PAD_NC(GPP_G5, UP_20K),
+	PAD_NC(GPP_G6, UP_20K),
+	PAD_NC(GPP_G7, UP_20K),
+
+	/* ------- GPIO Group GPP_H ------- */
+	PAD_NC(GPP_H0, UP_20K),
+	PAD_CFG_NF(GPP_H1, NONE, DEEP, NF3),		/* CNV_RF_RESET# / CNVI_RST# */
+	PAD_CFG_NF(GPP_H2, DN_20K, DEEP, NF3),		/* MODEM_CLKREQ / CNVI_CLKREQ */
+	PAD_NC(GPP_H3, UP_20K),
+	PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),		/* I2C2_SDA / SMD_7411 */
+	PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),		/* I2C2_SCL / SMC_7411 */
+	PAD_NC(GPP_H6, UP_20K),
+	PAD_NC(GPP_H7, UP_20K),
+	PAD_NC(GPP_H8, UP_20K),
+	PAD_NC(GPP_H9, UP_20K),
+	PAD_NC(GPP_H10, UP_20K),
+	PAD_NC(GPP_H11, UP_20K),
+	PAD_NC(GPP_H12, UP_20K),
+	PAD_NC(GPP_H13, UP_20K),
+	PAD_NC(GPP_H14, UP_20K),
+	PAD_NC(GPP_H15, UP_20K),
+	PAD_NC(GPP_H16, UP_20K),
+	PAD_NC(GPP_H17, UP_20K),
+	PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1),		/* CPU_C10_GATE# */
+	PAD_NC(GPP_H19, UP_20K),
+	PAD_NC(GPP_H20, UP_20K),
+	PAD_NC(GPP_H21, NONE),
+	PAD_NC(GPP_H22, UP_20K),
+	PAD_NC(GPP_H23, UP_20K),
+};
+
+#endif
+
+#endif
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c b/src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c
new file mode 100644
index 0000000000..7bb073698d
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+	/* Realtek ALC293 */
+	0x10ec0293, /* Vendor ID */
+	0x15581401, /* Subsystem ID */
+	12, /* Number of entries */
+	AZALIA_SUBVENDOR(0, 0x15581401),
+	AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
+	AZALIA_PIN_CFG(0, 0x13, 0x40000000),
+	AZALIA_PIN_CFG(0, 0x14, 0x90170110),
+	AZALIA_PIN_CFG(0, 0x15, 0x02211020),
+	AZALIA_PIN_CFG(0, 0x16, 0x411111f0),
+	AZALIA_PIN_CFG(0, 0x18, 0x411111f0),
+	AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
+	AZALIA_PIN_CFG(0, 0x1a, 0x01a1913c),
+	AZALIA_PIN_CFG(0, 0x1b, 0x411111f0),
+	AZALIA_PIN_CFG(0, 0x1d, 0x41748245),
+	AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
+
+	/* Intel GPU HDMI */
+	0x8086280b, /* Vendor ID */
+	0x80860101, /* Subsystem ID */
+	4, /* Number of entries */
+	AZALIA_SUBVENDOR(2, 0x80860101),
+	AZALIA_PIN_CFG(2, 0x05, 0x18560010),
+	AZALIA_PIN_CFG(2, 0x06, 0x18560010),
+	AZALIA_PIN_CFG(2, 0x07, 0x18560010),
+};
+
+const u32 pc_beep_verbs[] = {};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c b/src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c
new file mode 100644
index 0000000000..4b0ddd4823
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <soc/ramstage.h>
+#include "gpio.h"
+
+void mainboard_silicon_init_params(FSP_S_CONFIG *params)
+{
+	/* Configure pads prior to SiliconInit() in case there's any
+	 * dependencies during hardware initialization. */
+	cnl_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
+}
diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/romstage.c b/src/mainboard/clevo/cml-u/variants/l140cu/romstage.c
new file mode 100644
index 0000000000..1af8ce6633
--- /dev/null
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/romstage.c
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <soc/cnl_memcfg_init.h>
+#include <soc/romstage.h>
+
+static const struct cnl_mb_cfg memcfg = {
+	/* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */
+	.spd[0] = {
+		.read_type = READ_SPD_CBFS,
+		.spd_spec = {.spd_index = 0},
+	},
+	.spd[1] = {.read_type = NOT_EXISTING},
+	.spd[2] = {
+		.read_type = READ_SMBUS,
+		.spd_spec = {.spd_smbus_address = 0xa4},
+	},
+	.spd[3] = {.read_type = NOT_EXISTING},
+
+	/*
+	 * For each channel, there are 3 sets of DQ byte mappings,
+	 * where each set has a package 0 and a package 1 value (package 0
+	 * represents the first 64-bit lpddr4 chip combination, and package 1
+	 * represents the second 64-bit lpddr4 chip combination).
+	 * The first three sets are for CLK, CMD, and CTL.
+	 * The fsp package actually expects 6 sets, but the last 3 sets are
+	 * not used in CNL, so we only define the three sets that are used
+	 * and let the meminit_lpddr4() routine take care of clearing the
+	 * unused fields for the caller.
+	 */
+	.dq_map[DDR_CH0] = {
+		{0x0F, 0xF0}, {0x00, 0xF0}, {0x0F, 0xF0},
+		//{0x0F, 0x00}, {0xFF, 0x00}, {0xFF, 0x00}
+	},
+	.dq_map[DDR_CH1] = {
+		{0x33, 0xCC}, {0x00, 0xCC}, {0x33, 0xCC},
+		//{0x33, 0x00}, {0xFF, 0x00}, {0xFF, 0x00}
+	},
+
+	/*
+	 * DQS CPU<>DRAM map Ch0 and Ch1.  Each array entry represents a
+	 * mapping of a dq bit on the CPU to the bit it's connected to on
+	 * the memory part.  The array index represents the dqs bit number
+	 * on the memory part, and the values in the array represent which
+	 * pin on the CPU that DRAM pin connects to.
+	 */
+	.dqs_map[DDR_CH0] = {0, 1, 2, 3, 4, 5, 6, 7},
+	.dqs_map[DDR_CH1] = {1, 0, 2, 3, 4, 5, 6, 7},
+
+	/*
+	 * Rcomp resistor values.  These values represent the resistance in
+	 * ohms of the three rcomp resistors attached to the DDR_COMP_0,
+	 * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM.
+	 */
+	.rcomp_resistor = { 121, 81, 100 },
+
+	/*
+	 * Rcomp target values.  These will typically be the following
+	 * values for Cannon Lake : { 80, 40, 40, 40, 30 }
+	 */
+	.rcomp_targets = { 100, 40, 20, 20, 26 },
+
+	/*
+	 * Indicates whether memory is interleaved.
+	 * Set to 1 for an interleaved design,
+	 * set to 0 for non-interleaved design.
+	 */
+	.dq_pins_interleaved = 1,
+
+	/*
+	 * VREF_CA configuration.
+	 * Set to 0 VREF_CA goes to both CH_A and CH_B,
+	 * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B,
+	 * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B.
+	 */
+	.vref_ca_config = 2,
+
+	/* Early Command Training */
+	.ect = 0,
+};
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+	cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg);
+}