AGESA f14/f15tn/f16kb: Clean up buildOpts.c files

Until now, the buildOpts.c files were primarily made out of copy-pasted
AGESA options, commented-out definitions and several useless comments;
that is, the materialization of technical debt in GCC-parsable form...

Until now.

It is assumed that the boards in the tree still boot. So, by comparing
their settings, we can extract saner defaults to place into AGESA. Many
of the settings were common across all boards of the same family, so we
promote those values to default settings. In some cases flipping a flag
was required, so the macros to alter that option had to be adapted as
well. Since those AGESA versions are expected to never receive updates,
it should not be a problem to change their files to suit our needs.

As a result, all but two buildOpts.c files now have less than 100 lines.
AGESA f14 boards need less than 50 lines, and f15tn/f16kb just require
about 60 or 70 lines in those files. Hopefully, this will make porting
more mainboards using AGESA f14/f15tn/f16kb a substantially easier task.

TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.

Change-Id: Ife1ca5177d85441b9a7b24d64d7fcbabde6e0409
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>

1 files changed, 20 insertions, 233 deletions

diff --git a/src/mainboard/asrock/imb-a180/buildOpts.c b/src/mainboard/asrock/imb-a180/buildOpts.c
index 34561210f7..d7558f0091 100644
--- a/src/mainboard/asrock/imb-a180/buildOpts.c
+++ b/src/mainboard/asrock/imb-a180/buildOpts.c
@@ -1,196 +1,33 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
-/**
- * @file
- *
- * AMD User options selection for a Brazos platform solution system
- *
- * This file is placed in the user's platform directory and contains the
- * build option selections desired for that platform.
- *
- * For Information about this file, see @ref platforminstall.
- */
-
 #include <AGESA.h>
 
-#define INSTALL_FT3_SOCKET_SUPPORT           TRUE
-#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT   TRUE
-
-#define INSTALL_G34_SOCKET_SUPPORT  FALSE
-#define INSTALL_C32_SOCKET_SUPPORT  FALSE
-#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
-#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
-#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
-#define INSTALL_FS1_SOCKET_SUPPORT  FALSE
-#define INSTALL_FM1_SOCKET_SUPPORT  FALSE
-#define INSTALL_FP2_SOCKET_SUPPORT  FALSE
-#define INSTALL_FT1_SOCKET_SUPPORT  FALSE
-#define INSTALL_AM3_SOCKET_SUPPORT  FALSE
-#define INSTALL_FM2_SOCKET_SUPPORT  FALSE
+#define INSTALL_FT3_SOCKET_SUPPORT		TRUE
+#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT	TRUE
 
-#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT
-  #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE
-    #undef INSTALL_FT3_SOCKET_SUPPORT
-    #define INSTALL_FT3_SOCKET_SUPPORT     FALSE
-  #endif
-#endif
-
-//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
-//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
-#define BLDOPT_REMOVE_LRDIMMS_SUPPORT          TRUE
-//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
-//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
-//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
-#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
-#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
-#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
-//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
-#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT        TRUE
-//#define BLDOPT_REMOVE_ACPI_PSTATES             FALSE
-#define BLDOPT_REMOVE_SRAT                     FALSE //TRUE
-#define BLDOPT_REMOVE_SLIT                     FALSE //TRUE
-#define BLDOPT_REMOVE_WHEA                     FALSE //TRUE
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT		TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT		TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT		TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT		TRUE
+#define BLDOPT_REMOVE_SRAT			FALSE
+#define BLDOPT_REMOVE_WHEA			FALSE
 #define	BLDOPT_REMOVE_CRAT			TRUE
-#define BLDOPT_REMOVE_CDIT                     TRUE
-#define BLDOPT_REMOVE_DMI                      TRUE
-//#define BLDOPT_REMOVE_EARLY_SAMPLES            FALSE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE
-
-//This element selects whether P-States should be forced to be independent,
-// as reported by the ACPI _PSD object. For single-link processors,
-// setting TRUE for OS to support this feature.
-
-//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT  TRUE
-
-/* Build configuration values here.
- */
-#define BLDCFG_VRM_CURRENT_LIMIT                  15000
-#define BLDCFG_VRM_NB_CURRENT_LIMIT               13000
-#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT          21000
-#define BLDCFG_VRM_SVI_OCP_LEVEL                  BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
-#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT       17000
-#define BLDCFG_VRM_NB_SVI_OCP_LEVEL               BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
-#define BLDCFG_VRM_LOW_POWER_THRESHOLD            0
-#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD         0
-#define BLDCFG_VRM_SLEW_RATE                      10000
-#define BLDCFG_VRM_NB_SLEW_RATE                   BLDCFG_VRM_SLEW_RATE
-#define BLDCFG_VRM_HIGH_SPEED_ENABLE              TRUE
-
-#define BLDCFG_PLAT_NUM_IO_APICS                 3
-#define BLDCFG_GNB_IOAPIC_ADDRESS		0xFEC20000
-#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
-#define BLDCFG_MEM_INIT_PSTATE                   0
-#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS    0x1770 // Specifies the IO addresses trapped by the
-                                                         // core for C-state entry requests. A value
-                                                         // of 0 in this field specifies that the core
-                                                         // does not trap any IO addresses for C-state entry.
-                                                         // Values greater than 0xFFF8 results in undefined behavior.
-#define BLDCFG_PLATFORM_CSTATE_OPDATA             0x1770
+#define BLDOPT_REMOVE_CDIT			TRUE
 
-#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_MOBILE
+/* Build configuration values here. */
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD	0
 
-#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1866_FREQUENCY
-#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
-#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
-#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_UNBUFFERED
-#define BLDCFG_MEMORY_RDIMM_CAPABLE               FALSE
-#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
-#define BLDCFG_MEMORY_SODIMM_CAPABLE              TRUE
-#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    TRUE
-#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE
-#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        TRUE
-#define BLDCFG_MEMORY_POWER_DOWN                  TRUE
-#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHIP_SELECT
-#define BLDCFG_ONLINE_SPARE                       FALSE
-#define BLDCFG_BANK_SWIZZLE                       TRUE
-#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
-#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1866_FREQUENCY
-#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
-#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
-#define BLDCFG_USE_BURST_MODE                     FALSE
-#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
-#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
-#define BLDCFG_ECC_REDIRECTION                    FALSE
-#define BLDCFG_SCRUB_DRAM_RATE                    0
-#define BLDCFG_SCRUB_L2_RATE                      0
-#define BLDCFG_SCRUB_L3_RATE                      0
-#define BLDCFG_SCRUB_IC_RATE                      0
-#define BLDCFG_SCRUB_DC_RATE                      0
-#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
-#define BLDCFG_ECC_SYMBOL_SIZE                    4
-#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000ul
-#define BLDCFG_1GB_ALIGN                          FALSE
-#define BLDCFG_UMA_ALIGNMENT                      UMA_4MB_ALIGNED
-#define BLDCFG_UMA_ALLOCATION_MODE                UMA_AUTO
-#define BLDCFG_PLATFORM_CSTATE_MODE               CStateModeDisabled
-#define BLDCFG_IOMMU_SUPPORT                      FALSE
-#define OPTION_GFX_INIT_SVIEW                     FALSE
-//#define BLDCFG_PLATFORM_POWER_POLICY_MODE         BatteryLife
+#define BLDCFG_AMD_PLATFORM_TYPE		AMD_PLATFORM_MOBILE
 
-//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL         OEM_LCD_BACK_LIGHT_CONTROL
-#define BLDCFG_CFG_ABM_SUPPORT                    TRUE
+#define BLDCFG_MEMORY_RDIMM_CAPABLE		FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE		TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE		TRUE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING	TRUE
+#define BLDCFG_ENABLE_ECC_FEATURE		TRUE
+#define BLDCFG_ECC_SYNC_FLOOD			TRUE
+#define BLDCFG_IOMMU_SUPPORT			FALSE
 
-#define BLDCFG_CFG_GNB_HD_AUDIO                   TRUE
-//#define BLDCFG_IGPU_SUBSYSTEM_ID            OEM_IGPU_SSID
-//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID   OEM_IGPU_HD_AUDIO_SSID
-//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID  OEM_APU_PCIE_PORTS_SSID
-
-#ifdef PCIEX_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20)
-#endif
-
-#define BLDCFG_PROCESSOR_SCOPE_NAME0              'P'
-#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
-#define BLDCFG_PCIE_TRAINING_ALGORITHM           PcieTrainingDistributed
-
-/* Process the options...
- * This file include MUST occur AFTER the user option selection settings
- */
-/*
- * Customized OEM build configurations for FCH component
- */
-// #define BLDCFG_SMBUS0_BASE_ADDRESS            0xB00
-// #define BLDCFG_SMBUS1_BASE_ADDRESS            0xB20
-// #define BLDCFG_SIO_PME_BASE_ADDRESS           0xE00
-// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS     0x400
-// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS     0x404
-// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS      0x408
-// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS     0x410
-// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS        0x420
-// #define BLDCFG_SPI_BASE_ADDRESS               0xFEC10000
-// #define BLDCFG_WATCHDOG_TIMER_BASE            0xFEC00000
-// #define BLDCFG_HPET_BASE_ADDRESS              0xFED00000
-// #define BLDCFG_SMI_CMD_PORT_ADDRESS           0xB0
-// #define BLDCFG_ACPI_PMA_BLK_ADDRESS           0xFE00
-// #define BLDCFG_ROM_BASE_ADDRESS               0xFED61000
-// #define BLDCFG_AZALIA_SSID                    0x780D1022
-// #define BLDCFG_SMBUS_SSID                     0x780B1022
-// #define BLDCFG_IDE_SSID                       0x780C1022
-// #define BLDCFG_SATA_AHCI_SSID                 0x78011022
-// #define BLDCFG_SATA_IDE_SSID                  0x78001022
-// #define BLDCFG_SATA_RAID5_SSID                0x78031022
-// #define BLDCFG_SATA_RAID_SSID                 0x78021022
-// #define BLDCFG_EHCI_SSID                      0x78081022
-// #define BLDCFG_OHCI_SSID                      0x78071022
-// #define BLDCFG_LPC_SSID                       0x780E1022
-// #define BLDCFG_SD_SSID                        0x78061022
-// #define BLDCFG_XHCI_SSID                      0x78121022
-// #define BLDCFG_FCH_PORT80_BEHIND_PCIB         FALSE
-// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
-// #define BLDCFG_FCH_GPP_LINK_CONFIG            PortA4
-// #define BLDCFG_FCH_GPP_PORT0_PRESENT          FALSE
-// #define BLDCFG_FCH_GPP_PORT1_PRESENT          FALSE
-// #define BLDCFG_FCH_GPP_PORT2_PRESENT          FALSE
-// #define BLDCFG_FCH_GPP_PORT3_PRESENT          FALSE
-// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG          FALSE
-// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG          FALSE
-// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG          FALSE
-// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG          FALSE
+#define BLDCFG_CFG_GNB_HD_AUDIO			TRUE
 
 /* Include the files that instantiate the configuration definitions. */
 #include "cpuRegisters.h"
@@ -205,54 +42,4 @@
 #include "cpuLateInit.h"
 #include "GnbInterface.h"
 
-/*
- * Agesa optional capabilities selection.
- * Uncomment and mark FALSE those features you wish to include in the build.
- * Comment out or mark TRUE those features you want to REMOVE from the build.
- */
-
-#define DFLT_SMBUS0_BASE_ADDRESS            0xB00
-#define DFLT_SMBUS1_BASE_ADDRESS            0xB20
-#define DFLT_SIO_PME_BASE_ADDRESS           0xE00
-#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS     0x800
-#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS     0x804
-#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS      0x808
-#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS     0x810
-#define DFLT_ACPI_GPE0_BLOCK_ADDRESS        0x820
-#define DFLT_SPI_BASE_ADDRESS               0xFEC10000
-#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS    0xFEC000F0
-#define DFLT_HPET_BASE_ADDRESS              0xFED00000
-#define DFLT_SMI_CMD_PORT                   0xB0
-#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS       0xFE00
-#define DFLT_GEC_BASE_ADDRESS               0xFED61000
-#define DFLT_AZALIA_SSID                    0x780D1022
-#define DFLT_SMBUS_SSID                     0x780B1022
-#define DFLT_IDE_SSID                       0x780C1022
-#define DFLT_SATA_AHCI_SSID                 0x78011022
-#define DFLT_SATA_IDE_SSID                  0x78001022
-#define DFLT_SATA_RAID5_SSID                0x78031022
-#define DFLT_SATA_RAID_SSID                 0x78021022
-#define DFLT_EHCI_SSID                      0x78081022
-#define DFLT_OHCI_SSID                      0x78071022
-#define DFLT_LPC_SSID                       0x780E1022
-#define DFLT_SD_SSID                        0x78061022
-#define DFLT_XHCI_SSID                      0x78121022
-#define DFLT_FCH_PORT80_BEHIND_PCIB         FALSE
-#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
-#define DFLT_FCH_GPP_LINK_CONFIG            PortA4
-#define DFLT_FCH_GPP_PORT0_PRESENT          FALSE
-#define DFLT_FCH_GPP_PORT1_PRESENT          FALSE
-#define DFLT_FCH_GPP_PORT2_PRESENT          FALSE
-#define DFLT_FCH_GPP_PORT3_PRESENT          FALSE
-#define DFLT_FCH_GPP_PORT0_HOTPLUG          FALSE
-#define DFLT_FCH_GPP_PORT1_HOTPLUG          FALSE
-#define DFLT_FCH_GPP_PORT2_HOTPLUG          FALSE
-#define DFLT_FCH_GPP_PORT3_HOTPLUG          FALSE
-
-GPIO_CONTROL   imba180_gpio[] = {
-	{183, Function1, GpioIn | GpioOutEnB | PullUpB},
-	{-1}
-};
-//#define BLDCFG_FCH_GPIO_CONTROL_LIST           (&imba180_gpio[0])
-
 #include <PlatformInstall.h>