summaryrefslogtreecommitdiff
path: root/src/mainboard/artecgroup
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2006-09-19 19:30:11 +0000
committerRonald G. Minnich <rminnich@gmail.com>2006-09-19 19:30:11 +0000
commitefba85f00e16c541eb8205b8dbb5611dc18b9544 (patch)
treee88cccfb77d9f329bce135a8fd80ce65e9e15bc3 /src/mainboard/artecgroup
parent21acfcb0d515553cd9c6d42fbd48b458572c8fbe (diff)
commit moire changes
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2428 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/artecgroup')
-rw-r--r--src/mainboard/artecgroup/dbe61/Config.lb75
-rw-r--r--src/mainboard/artecgroup/dbe61/Options.lb6
-rw-r--r--src/mainboard/artecgroup/dbe61/auto.c75
-rw-r--r--src/mainboard/artecgroup/dbe61/mainboard.c40
4 files changed, 88 insertions, 108 deletions
diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb
index b9d0e15f39..48e0fec450 100644
--- a/src/mainboard/artecgroup/dbe61/Config.lb
+++ b/src/mainboard/artecgroup/dbe61/Config.lb
@@ -125,32 +125,69 @@ config chip.h
chip northbridge/amd/lx
register "irqmap" = "0xcba5"
- register "setupflash" = "1"
device apic_cluster 0 on
chip cpu/amd/model_lx
device apic 0 on end
end
end
device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536_lx
- register "enable_gpio0_inta" = "1"
- register "enable_ide_nand_flash" = "1"
- register "enable_uarta" = "1"
- register "audio_irq" = "11"
- register "usbf4_irq" = "5"
- register "usbf5_irq" = "5"
- register "usbf6_irq" = "5"
- register "usbf7_irq" = "5"
- device pci d.0 on end # Realtek 8139 LAN
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
+
+ device pci 1.0 on end # Host Bridge
+
+ chip drivers/pci/realmode
+ device pci 1.1 on end # VGA
+ register "rom_address" = "0xfffc0000" # at the beginning of 256k
+ end
+
+ device pci 1.2 off end # AES
+ chip southbridge/amd/cs5536_lx
+ register "enable_ide_nand_flash" = "0"
+
+ register "isa_irq" = "0"
+ #register "flash_irq" = "14"
+
+ ## IDE IRQ
+ register "enable_ide_irq" = "0"
+
+ register "audio_irq" = "5"
+ register "usb_irq" = "7"
+
+ register "uart0_irq" = "0"
+ register "uart1_irq" = "4"
+
+ ## PCI INTA ... INTD and their GPIO pins
+ ## int==0: disable
+ register "pci_int[0]" = "0"
+ register "pci_int[1]" = "10"
+ register "pci_int[2]" = "0"
+ register "pci_int[3]" = "0"
+ register "pci_int_pin[0]" = "0"
+ register "pci_int_pin[1]" = "7"
+ register "pci_int_pin[2]" = "0"
+ register "pci_int_pin[3]" = "0"
+
+
+ # Keyboard Emulation Logic IRQs
+ # Enable keyboard IRQ2
+ register "enable_kel_keyb_irq" = "0"
+ # Enable mouse IRQ12
+ register "enable_kel_mouse_irq" = "0"
+ # Configure KEL Emulation IRQ, 0 to disable
+ register "kel_emul_irq" = "0"
+
+ device pci f.0 on end # ISA Bridge
+ device pci f.1 on end # Flash controller
+ device pci f.2 off end # IDE controller
+ device pci f.3 on end # Audio
device pci f.4 on end # OHCI
device pci f.5 on end # EHCI
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- end
- end
+ device pci f.6 off end # UDC controller
+ device pci f.7 off end # OTG controller
+ end
+ chip drivers/pci/rtl8139
+ device pci d.0 on end # Realtek LAN
+ register "nic_irq" = "10"
+ end
+ end
end
diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb
index ec4c78c330..b42f0d04a7 100644
--- a/src/mainboard/artecgroup/dbe61/Options.lb
+++ b/src/mainboard/artecgroup/dbe61/Options.lb
@@ -40,6 +40,9 @@ uses TTYS0_BASE
uses TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses VIDEO_MB
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
@@ -47,6 +50,9 @@ default ROM_SIZE = 256*1024
###
### Build options
###
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=0
+default VIDEO_MB=8
##
## Build code for the fallback boot
diff --git a/src/mainboard/artecgroup/dbe61/auto.c b/src/mainboard/artecgroup/dbe61/auto.c
index 866f6e4752..1dba629381 100644
--- a/src/mainboard/artecgroup/dbe61/auto.c
+++ b/src/mainboard/artecgroup/dbe61/auto.c
@@ -37,24 +37,6 @@ static inline unsigned int fls(unsigned int x)
return r;
}
-
-
-
-/* sdram parameters for OLPC:
- row address = 13
- col address = 9
- banks = 4
- dimm0size=128MB
- d0_MB=1 (module banks)
- d0_cb=4 (component banks)
- do_psz=4KB (page size)
- Trc=10 (clocks) (ref2act)
- Tras=7 (act2pre)
- Trcd=3 (act2cmd)
- Trp=3 (pre2act)
- Trrd=2 (act2act)
- Tref=17.8ms
- */
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
@@ -65,49 +47,8 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
msr_t msr;
unsigned char module_banks, val;
-
-#if 0 //GX3
- msr = rdmsr(MC_CF07_DATA);
-
- /* get module banks (sides) per dimm, SPD byte 5 */
- module_banks = 1;
- module_banks >>= 1;
- msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
- msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
-
- /* get component banks per module bank, SPD byte 17 */
- val = 4;
- val >>= 2;
- msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
-
- /* get the module bank density, SPD byte 31 */
- /* this is multiples of 8 MB */
- /* actually it is 2^x*4, where x is the value you put in */
- /* for OLPC, set default size */
- /* dimm size - hardcoded 128Mb */
- val = 5;
- msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
-
- /* page size = 2^col address */
- val = 2; /* 4096 bytes */
- msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
-
- print_debug("computed msr.hi ");
- print_debug_hex32(msr.hi);
- print_debug("\r\n");
-
- /* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
- /* well, it may be close. It's about 200,000 ticks */
- msr.lo = 0x00003000;
- wrmsr(MC_CF07_DATA, msr);
-
-#endif
-
- msr.hi = 0x00005012;
- msr.lo = 0x05000040;
+ msr.hi = 0x10075012;
+ msr.lo = 0x00000040;
wrmsr(MC_CF07_DATA, msr); //GX3
@@ -140,17 +81,17 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
#include "northbridge/amd/lx/raminit.c"
#include "sdram/generic_sdram.c"
-#define PLLMSRhi 0x00001490
-#define PLLMSRlo 0x02000030
-#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
-#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
+/* CPU and GLIU mult/div */
+#define PLLMSRhi 0x0000039C
+/* Hold Count - how long we will sit in reset */
+#define PLLMSRlo 0x00DE0000
+
#include "northbridge/amd/lx/pll_reset.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
+
static void msr_init(void)
{
- __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
-
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
diff --git a/src/mainboard/artecgroup/dbe61/mainboard.c b/src/mainboard/artecgroup/dbe61/mainboard.c
index c95ca159f4..5a8fb6b469 100644
--- a/src/mainboard/artecgroup/dbe61/mainboard.c
+++ b/src/mainboard/artecgroup/dbe61/mainboard.c
@@ -4,35 +4,31 @@
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/lxdef.h>
#include "chip.h"
+#define DIVIL_LBAR_GPIO 0x5140000c
-static void init(struct device *dev)
+static void init_gpio()
{
- unsigned bus = 0;
- unsigned devNic = PCI_DEVFN(0xd, 0);
- unsigned devUsb = PCI_DEVFN(0xf, 4);
- device_t usb = NULL, nic = NULL;
- unsigned char irqUsb = 0xa, irqNic = 0xb;
+ msr_t msr;
+ printk_debug("Initializing GPIO module...\n");
+
+ // initialize the GPIO LBAR
+ msr.lo = GPIO_BASE;
+ msr.hi = 0x0000f001;
+ wrmsr(DIVIL_LBAR_GPIO, msr);
+ msr = rdmsr(DIVIL_LBAR_GPIO);
+ printk_debug("DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo);
+}
+static void init(struct device *dev)
+{
+ // BOARD-SPECIFIC INIT
printk_debug("ARTECGROUP DBE61 ENTER %s\n", __FUNCTION__);
- // FIXME: do we need to initialize USB OHCI this way?
- printk_debug("%s (%x,%x) set USB PCI interrupt line to %d\n",
- __FUNCTION__, bus, devUsb, irqUsb);
-
- // initialize the USB controller
- usb = dev_find_slot(bus, devUsb);
- if (!usb) printk_err("Could not find USB\n");
- else pci_write_config8(usb, PCI_INTERRUPT_LINE, irqUsb);
-
- printk_debug("%s (%x,%x) set NIC PCI interrupt line to %d\n",
- __FUNCTION__, bus, devNic, irqNic);
-
- // initialize the Realtek NIC
- nic = dev_find_slot(bus, devNic);
- if (!nic) printk_err("Could not find USB\n");
- else pci_write_config8(nic, PCI_INTERRUPT_LINE, irqNic);
+ init_gpio();
printk_debug("ARTECGROUP DBE61 EXIT %s\n", __FUNCTION__);
}