Persimmon/Fam14/SB800 DSDT: Split into common areas

Split the Persimmon DSDT into common code areas.
For example, split the Southbridge specific code into
the Southbridge directory and CPU specific code into
the CPU directory.  Also adding the superio.asl file
to the Persimmon DSDT tree. This file is empty for
the moment but will be necessary in the future.  I have
also emptied the thermal.asl file in the mainboard
directory because it does not seem to perform as
intended (fan control does not change when it is
brought back into the code base) and it has been
inside a '#if 0' statement for a long time.  Removing
it until it is decided that it is actually necessary.

This change was verified in three different ways:
	1. Visual comparison of the compiled DSDT pulled from the
	Persimmon after booting into Linux using the ACPI tools
	acpidump, acpixtract, and iasl.  The comparison was done
	between the DSDT before and after doing the split work.

	This test is somewhat difficult considering the expanse
	of the changes.  Blocks of code have been moved, and
	others changed.

	2. Linux logs were dumped before and after the DSDT split.
	Logs dumped and compared include dmesg and lspci -tv.
	Neither log changed significantly between the two compare
	points.

	3. The test suite FWTS was run on the Coreboot build both
	before and after doing the DSDT split with the command
	'sudo fwts -b -P -u'.  The flag -b specifies all batch jobs,
	-P specifies all power tests, and -u specifies utilities.
	Interactive jobs were not run as most of them consist of
	laptop checks.  Again, there were no significant changes
	between the two endpoints.

These tests lead me to believe that there was no change in
the functionality of the ACPI tables apart from what is
known and expected.

This patch is the first of a series of patches to split the DSDT.
The ASRock patch was merged before this one and breaks the ASROCK
E350M1 build (patch 8d80a3fb: http://review.coreboot.org/#/c/3050/).
Please be aware of this dependency when pulling these patches.
Other patches that depend on this patch are
'AMD Fam14: Split out the AMD Fam14 DSDT'
(http://review.coreboot.org/#/c/3051/)
and 'Fam14 DSDT: Also return for unrecognized UUID in _OSC'
(http://review.coreboot.org/#/c/3052/)

Change-Id: I53ff59909cceb30a08e8eab3d59b30b97c802726
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/3048
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>

8 files changed, 359 insertions, 1877 deletions

diff --git a/src/mainboard/amd/persimmon/acpi/gpe.asl b/src/mainboard/amd/persimmon/acpi/gpe.asl
new file mode 100644
index 0000000000..6ad1ad4d48
--- /dev/null
+++ b/src/mainboard/amd/persimmon/acpi/gpe.asl
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Scope(\_GPE) {	/* Start Scope GPE */
+
+	/*  General event 3  */
+	Method(_L03) {
+		/* DBGO("\\_GPE\\_L00\n") */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Legacy PM event  */
+	Method(_L08) {
+		/* DBGO("\\_GPE\\_L08\n") */
+	}
+
+	/*  Temp warning (TWarn) event  */
+	Method(_L09) {
+		/* DBGO("\\_GPE\\_L09\n") */
+		/* Notify (\_TZ.TZ00, 0x80) */
+	}
+
+	/*  USB controller PME#  */
+	Method(_L0B) {
+		/* DBGO("\\_GPE\\_L0B\n") */
+		Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  ExtEvent0 SCI event  */
+	Method(_L10) {
+		/* DBGO("\\_GPE\\_L10\n") */
+	}
+
+
+	/*  ExtEvent1 SCI event  */
+	Method(_L11) {
+		/* DBGO("\\_GPE\\_L11\n") */
+	}
+
+	/*  GPIO0 or GEvent8 event  */
+	Method(_L18) {
+		/* DBGO("\\_GPE\\_L18\n") */
+		Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Azalia SCI event  */
+	Method(_L1B) {
+		/* DBGO("\\_GPE\\_L1B\n") */
+		Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+} 	/* End Scope GPE */
+
+/* Contains the GPEs for USB overcurrent */
+#include "usb_oc.asl"
+
diff --git a/src/mainboard/amd/persimmon/acpi/mainboard.asl b/src/mainboard/amd/persimmon/acpi/mainboard.asl
new file mode 100644
index 0000000000..49ea44fabf
--- /dev/null
+++ b/src/mainboard/amd/persimmon/acpi/mainboard.asl
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Data to be patched by the BIOS during POST */
+/* FIXME the patching is not done yet! */
+/* Memory related values */
+Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0)	/* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+Name(SSFG, 0x0D)	/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSTP, 3)	/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones)	/* Assume nothing */
+Name(PMOD, One)	/* Assume APIC */
+
+Scope(\_SB) {
+	Method(CkOT, 0){
+
+		if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+
+		if(CondRefOf(\_OSI,Local1))
+		{
+			Store(1, OSTP)					/* Assume some form of XP */
+			if (\_OSI("Windows 2006"))		/* Vista */
+			{
+				Store(2, OSTP)
+			}
+		} else {
+			If(WCMP(\_OS,"Linux")) {
+				Store(3, OSTP)				/* Linux */
+			} Else {
+				Store(4, OSTP)				/* Gotta be WinCE */
+			}
+		}
+		Return(OSTP)
+	}
+}
+
+Scope(\_SI) {
+	Method(_SST, 1) {
+		/* DBGO("\\_SI\\_SST\n") */
+		/* DBGO("   New Indicator state: ") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+	}
+} /* End Scope SI */
+
diff --git a/src/mainboard/amd/persimmon/acpi/routing.asl b/src/mainboard/amd/persimmon/acpi/routing.asl
index 7a871da047..e98047ce6f 100644
--- a/src/mainboard/amd/persimmon/acpi/routing.asl
+++ b/src/mainboard/amd/persimmon/acpi/routing.asl
@@ -64,37 +64,17 @@ Scope(\_SB) {
 		Package(){0x0007FFFF, 2, INTB, 0 },
 		Package(){0x0007FFFF, 3, INTC, 0 },
 
-		Package(){0x0009FFFF, 0, INTB, 0 },
-		Package(){0x0009FFFF, 1, INTC, 0 },
-		Package(){0x0009FFFF, 2, INTD, 0 },
-		Package(){0x0009FFFF, 3, INTA, 0 },
-
-		Package(){0x000AFFFF, 0, INTC, 0 },
-		Package(){0x000AFFFF, 1, INTD, 0 },
-		Package(){0x000AFFFF, 2, INTA, 0 },
-		Package(){0x000AFFFF, 3, INTB, 0 },
-
-		Package(){0x000BFFFF, 0, INTD, 0 },
-		Package(){0x000BFFFF, 1, INTA, 0 },
-		Package(){0x000BFFFF, 2, INTB, 0 },
-		Package(){0x000BFFFF, 3, INTC, 0 },
-
-		Package(){0x000CFFFF, 0, INTA, 0 },
-		Package(){0x000CFFFF, 1, INTB, 0 },
-		Package(){0x000CFFFF, 2, INTC, 0 },
-		Package(){0x000CFFFF, 3, INTD, 0 },
-
 		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
 
+
 		/* SB devices */
-		/* Bus 0, Dev 17 - SATA controller #2 */
-		/* Bus 0, Dev 18 - SATA controller #1 */
+		/* Bus 0, Dev 17 - SATA controller */
 		Package(){0x0011FFFF, 0, INTD, 0 },
 
-		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
-		 * EHCI, dev 18, 19 func 2 */
-		Package(){0x0012FFFF, 0, INTC, 0 },
-		Package(){0x0012FFFF, 1, INTB, 0 },
+		/* OHCI, dev 18, 19, 22 func 0
+		 * EHCI, dev 18, 19, 22 func 2 */
+		Package(){0x0012FFFF, 0, INTC, 0 },	/* Dev 12, INTA, handled by INTC device, Global */
+		Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */
 
 		Package(){0x0013FFFF, 0, INTC, 0 },
 		Package(){0x0013FFFF, 1, INTB, 0 },
@@ -102,9 +82,7 @@ Scope(\_SB) {
 		Package(){0x0016FFFF, 0, INTC, 0 },
 		Package(){0x0016FFFF, 1, INTB, 0 },
 
-		/* Package(){0x0014FFFF, 1, INTA, 0 }, */
-
-		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI; F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
 		Package(){0x0014FFFF, 0, INTA, 0 },
 		Package(){0x0014FFFF, 1, INTB, 0 },
 		Package(){0x0014FFFF, 2, INTC, 0 },
@@ -160,34 +138,19 @@ Scope(\_SB) {
 		Package(){0x0007FFFF, 2, 0, 17 },
 		Package(){0x0007FFFF, 3, 0, 18 },
 
-		/* Bus 0, Dev 9 - PCIe Bridge for network card */
-		Package(){0x0009FFFF, 0, 0, 17 },
-		Package(){0x0009FFFF, 1, 0, 16 },
-		Package(){0x0009FFFF, 2, 0, 17 },
-		Package(){0x0009FFFF, 3, 0, 18 },
-		/* Bus 0, Dev A - PCIe Bridge for network card */
-		Package(){0x000AFFFF, 0, 0, 18 },
-		Package(){0x000AFFFF, 1, 0, 16 },
-		Package(){0x000AFFFF, 2, 0, 17 },
-		Package(){0x000AFFFF, 3, 0, 18 },
 		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
 
 		/* SB devices in APIC mode */
-		/* Bus 0, Dev 17 - SATA controller #2 */
-		/* Bus 0, Dev 18 - SATA controller #1 */
+		/* Bus 0, Dev 17 - SATA controller */
 		Package(){0x0011FFFF, 0, 0, 19 },
 
-		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
-		 * EHCI, dev 18, 19 func 2 */
+		/* OHCI, dev 18, 19, 22 func 0
+		 * EHCI, dev 18, 19, 22 func 2 */
 		Package(){0x0012FFFF, 0, 0, 18 },
 		Package(){0x0012FFFF, 1, 0, 17 },
-		/* Package(){0x0012FFFF, 2, 0, 18 }, */
 
 		Package(){0x0013FFFF, 0, 0, 18 },
 		Package(){0x0013FFFF, 1, 0, 17 },
-		/* Package(){0x0013FFFF, 2, 0, 16 }, */
-
-		/* Package(){0x00140000, 0, 0, 16 }, */
 
 		Package(){0x0016FFFF, 0, 0, 18 },
 		Package(){0x0016FFFF, 1, 0, 17 },
@@ -299,36 +262,6 @@ Scope(\_SB) {
 		Package(){0x0000FFFF, 3, 0, 18 },
 	})
 
-	Name(PS9, Package(){
-		/* PCIe slot - Hooked to PCIe slot 9 */
-		Package(){0x0000FFFF, 0, INTD, 0 },
-		Package(){0x0000FFFF, 1, INTA, 0 },
-		Package(){0x0000FFFF, 2, INTB, 0 },
-		Package(){0x0000FFFF, 3, INTC, 0 },
-	})
-	Name(APS9, Package(){
-		/* PCIe slot - Hooked to PCIe slot 9 */
-		Package(){0x0000FFFF, 0, 0, 17 },
-		Package(){0x0000FFFF, 1, 0, 18 },
-		Package(){0x0000FFFF, 2, 0, 19 },
-		Package(){0x0000FFFF, 3, 0, 16 },
-	})
-
-	Name(PSa, Package(){
-		/* PCIe slot - Hooked to PCIe slot 10 */
-		Package(){0x0000FFFF, 0, INTD, 0 },
-		Package(){0x0000FFFF, 1, INTA, 0 },
-		Package(){0x0000FFFF, 2, INTB, 0 },
-		Package(){0x0000FFFF, 3, INTC, 0 },
-	})
-	Name(APSa, Package(){
-		/* PCIe slot - Hooked to PCIe slot 10 */
-		Package(){0x0000FFFF, 0, 0, 18 },
-		Package(){0x0000FFFF, 1, 0, 19 },
-		Package(){0x0000FFFF, 2, 0, 16 },
-		Package(){0x0000FFFF, 3, 0, 17 },
-	})
-
 	Name(PE0, Package(){
 		/* PCIe slot - Hooked to PCIe slot 10 */
 		Package(){0x0000FFFF, 0, INTA, 0 },
@@ -390,7 +323,7 @@ Scope(\_SB) {
 	})
 
 	Name(PCIB, Package(){
-		/* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
+		/* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Func 4. */
 		Package(){0x0003FFFF, 0, 0, 0x14 },
 		Package(){0x0003FFFF, 1, 0, 0x15 },
 		Package(){0x0003FFFF, 2, 0, 0x16 },
diff --git a/src/mainboard/amd/persimmon/acpi/sleep.asl b/src/mainboard/amd/persimmon/acpi/sleep.asl
new file mode 100644
index 0000000000..a109151509
--- /dev/null
+++ b/src/mainboard/amd/persimmon/acpi/sleep.asl
@@ -0,0 +1,121 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+*		-none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort	the operation without notification to
+* the ACPI driver.  This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+	/* DBGO("\\_PTS\n") */
+	/* DBGO("From S0 to S") */
+	/* DBGO(Arg0) */
+	/* DBGO("\n") */
+
+	/* Don't allow PCIRST# to reset USB */
+	if (LEqual(Arg0,3)){
+		Store(0,URRE)
+	}
+
+	/* Clear sleep SMI status flag and enable sleep SMI trap. */
+	/*Store(One, CSSM)
+	Store(One, SSEN)*/
+
+	/* On older chips, clear PciExpWakeDisEn */
+	/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+	*    	Store(0,\_SB.PWDE)
+	*}
+	*/
+
+	/* Clear wake status structure. */
+	Store(0, Index(WKST,0))
+	Store(0, Index(WKST,1))
+} /* End Method(\_PTS) */
+
+/*
+*	\_BFS OEM Back From Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		-none-
+*/
+Method(\_BFS, 1) {
+	/* DBGO("\\_BFS\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+}
+
+/*
+*  \_WAK System Wake method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		Return package of 2 DWords
+*		Dword 1 - Status
+*			0x00000000	wake succeeded
+*			0x00000001	Wake was signaled but failed due to lack of power
+*			0x00000002	Wake was signaled but failed due to thermal condition
+*		Dword 2 - Power Supply state
+*			if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+	/* DBGO("\\_WAK\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+
+	/* Re-enable HPET */
+	Store(1,HPDE)
+
+	/* Restore PCIRST# so it resets USB */
+	if (LEqual(Arg0,3)){
+		Store(1,URRE)
+	}
+
+	/* Arbitrarily clear PciExpWakeStatus */
+	Store(PWST, PWST)
+
+	/* if(DeRefOf(Index(WKST,0))) {
+	*	Store(0, Index(WKST,1))
+	* } else {
+	*	Store(Arg0, Index(WKST,1))
+	* }
+	*/
+	Return(WKST)
+} /* End Method(\_WAK) */
+
diff --git a/src/mainboard/amd/persimmon/acpi/superio.asl b/src/mainboard/amd/persimmon/acpi/superio.asl
new file mode 100644
index 0000000000..e042553bee
--- /dev/null
+++ b/src/mainboard/amd/persimmon/acpi/superio.asl
@@ -0,0 +1,18 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/amd/persimmon/acpi/thermal.asl b/src/mainboard/amd/persimmon/acpi/thermal.asl
new file mode 100644
index 0000000000..2f50475305
--- /dev/null
+++ b/src/mainboard/amd/persimmon/acpi/thermal.asl
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Thermal Zones have been #if 0 for a long time.
+ * Removing it for now because it doesn't seem to
+ * do anything when enabled anyway.
+ */
diff --git a/src/mainboard/amd/persimmon/acpi/usb.asl b/src/mainboard/amd/persimmon/acpi/usb_oc.asl
index 2822ffda83..0429ac77b2 100644
--- a/src/mainboard/amd/persimmon/acpi/usb.asl
+++ b/src/mainboard/amd/persimmon/acpi/usb_oc.asl
@@ -25,9 +25,22 @@ DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
 		#include "usb.asl"
 	}
 */
+
+/* USB overcurrent mapping pins.   */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
+
 Method(UCOC, 0) {
 	Sleep(20)
-    	Store(0x13,CMTI)
+	Store(0x13,CMTI)
 	Store(0,GPSL)
 }
 
@@ -125,7 +138,7 @@ If (LLessEqual(UOM6,9)) {
 
 /* USB Port 7 overcurrent uses Gpm 7 */
 If (LLessEqual(UOM7,9)) {
- 	Scope (\_GPE) {
+	Scope (\_GPE) {
 		/* Method (_L1D) { */
 		Method (_L07) {
 			UCOC()
diff --git a/src/mainboard/amd/persimmon/dsdt.asl b/src/mainboard/amd/persimmon/dsdt.asl
index acc85c6613..1288929a1b 100644
--- a/src/mainboard/amd/persimmon/dsdt.asl
+++ b/src/mainboard/amd/persimmon/dsdt.asl
@@ -19,1820 +19,45 @@
 
 /* DefinitionBlock Statement */
 DefinitionBlock (
-	"DSDT.AML",           /* Output filename */
-	"DSDT",                 /* Signature */
+	"DSDT.AML",	/* Output filename */
+	"DSDT",		/* Signature */
 	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
-	"AMD   ",               /* OEMID */
-	"COREBOOT",	     /* TABLE ID */
+	"AMD   ",	/* OEMID */
+	"COREBOOT",	/* TABLE ID */
 	0x00010001	/* OEM Revision */
 	)
 {	/* Start of ASL file */
-	/* #include <arch/i386/acpi/debug.asl> */		/* Include global debug methods if needed */
-
-	/* Data to be patched by the BIOS during POST */
-	/* FIXME the patching is not done yet! */
-	/* Memory related values */
-	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
-	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
-	Name(PBLN, 0x0)	/* Length of BIOS area */
-
-	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
-	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
-
-	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
-
-	/* USB overcurrent mapping pins.   */
-	Name(UOM0, 0)
-	Name(UOM1, 2)
-	Name(UOM2, 0)
-	Name(UOM3, 7)
-	Name(UOM4, 2)
-	Name(UOM5, 2)
-	Name(UOM6, 6)
-	Name(UOM7, 2)
-	Name(UOM8, 6)
-	Name(UOM9, 6)
-
-	/* Some global data */
-	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
-	Name(OSV, Ones)	/* Assume nothing */
-	Name(PMOD, One)	/* Assume APIC */
-
-	/*
-	 * Processor Object
-	 *
-	 */
-	Scope (\_PR) {		/* define processor scope */
-		Processor(
-			C000,		/* name space name, align with BLDCFG_PROCESSOR_SCOPE_NAME[01] */
-			0,		/* Unique number for this processor */
-			0x810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-
-		Processor(
-			C001,		/* name space name */
-			1,		/* Unique number for this processor */
-			0x810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			C002,		/* name space name */
-			2,		/* Unique number for this processor */
-			0x810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			C003,		/* name space name */
-			3,		/* Unique number for this processor */
-			0x810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-	} /* End _PR scope */
-
-	/* PIC IRQ mapping registers, C00h-C01h. */
-	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
-		Field(PRQM, ByteAcc, NoLock, Preserve) {
-		PRQI, 0x00000008,
-		PRQD, 0x00000008,  /* Offset: 1h */
-	}
-	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
-		PIRA, 0x00000008,	/* Index 0 */
-		PIRB, 0x00000008,	/* Index 1 */
-		PIRC, 0x00000008,	/* Index 2 */
-		PIRD, 0x00000008,	/* Index 3 */
-		PIRE, 0x00000008,	/* Index 4 */
-		PIRF, 0x00000008,	/* Index 5 */
-		PIRG, 0x00000008,	/* Index 6 */
-		PIRH, 0x00000008,	/* Index 7 */
-	}
-
-	/* PCI Error control register */
-	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
-		Field(PERC, ByteAcc, NoLock, Preserve) {
-		SENS, 0x00000001,
-		PENS, 0x00000001,
-		SENE, 0x00000001,
-		PENE, 0x00000001,
-	}
-
-	/* Client Management index/data registers */
-	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
-		Field(CMT, ByteAcc, NoLock, Preserve) {
-		CMTI,      8,
-		/* Client Management Data register */
-		G64E,   1,
-		G64O,      1,
-		G32O,      2,
-		,       2,
-		GPSL,     2,
-	}
-
-	/* GPM Port register */
-	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
-		Field(GPT, ByteAcc, NoLock, Preserve) {
-		GPB0,1,
-		GPB1,1,
-		GPB2,1,
-		GPB3,1,
-		GPB4,1,
-		GPB5,1,
-		GPB6,1,
-		GPB7,1,
-	}
-
-	/* Flash ROM program enable register */
-	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
-		Field(FRE, ByteAcc, NoLock, Preserve) {
-		,     0x00000006,
-		FLRE, 0x00000001,
-	}
-
-	/* PM2 index/data registers */
-	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
-		Field(PM2R, ByteAcc, NoLock, Preserve) {
-		PM2I, 0x00000008,
-		PM2D, 0x00000008,
-	}
-
-	/* Power Management I/O registers, TODO:PMIO is quite different in SB800. */
-	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
-		Field(PIOR, ByteAcc, NoLock, Preserve) {
-		PIOI, 0x00000008,
-		PIOD, 0x00000008,
-	}
-	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
-		Offset(0x00),	/* MiscControl */
-		, 1,
-		T1EE, 1,
-		T2EE, 1,
-		Offset(0x01),	/* MiscStatus */
-		, 1,
-		T1E, 1,
-		T2E, 1,
-		Offset(0x04),	/* SmiWakeUpEventEnable3 */
-		, 7,
-		SSEN, 1,
-		Offset(0x07),	/* SmiWakeUpEventStatus3 */
-		, 7,
-		CSSM, 1,
-		Offset(0x10),	/* AcpiEnable */
-		, 6,
-		PWDE, 1,
-		Offset(0x1C),	/* ProgramIoEnable */
-		, 3,
-		MKME, 1,
-		IO3E, 1,
-		IO2E, 1,
-		IO1E, 1,
-		IO0E, 1,
-		Offset(0x1D),	/* IOMonitorStatus */
-		, 3,
-		MKMS, 1,
-		IO3S, 1,
-		IO2S, 1,
-		IO1S, 1,
-		IO0S,1,
-		Offset(0x20),	/* AcpiPmEvtBlk. TODO: should be 0x60 */
-		APEB, 16,
-		Offset(0x36),	/* GEvtLevelConfig */
-		, 6,
-		ELC6, 1,
-		ELC7, 1,
-		Offset(0x37),	/* GPMLevelConfig0 */
-		, 3,
-		PLC0, 1,
-		PLC1, 1,
-		PLC2, 1,
-		PLC3, 1,
-		PLC8, 1,
-		Offset(0x38),	/* GPMLevelConfig1 */
-		, 1,
-		 PLC4, 1,
-		 PLC5, 1,
-		, 1,
-		 PLC6, 1,
-		 PLC7, 1,
-		Offset(0x3B),	/* PMEStatus1 */
-		GP0S, 1,
-		GM4S, 1,
-		GM5S, 1,
-		APS, 1,
-		GM6S, 1,
-		GM7S, 1,
-		GP2S, 1,
-		STSS, 1,
-		Offset(0x55),	/* SoftPciRst */
-		SPRE, 1,
-		, 1,
-		, 1,
-		PNAT, 1,
-		PWMK, 1,
-		PWNS, 1,
-
-		/* 	Offset(0x61), */	/*  Options_1 */
-		/* 		,7,  */
-		/* 		R617,1, */
-
-		Offset(0x65),	/* UsbPMControl */
-		, 4,
-		URRE, 1,
-		Offset(0x68),	/* MiscEnable68 */
-		, 3,
-		TMTE, 1,
-		, 1,
-		Offset(0x92),	/* GEVENTIN */
-		, 7,
-		E7IS, 1,
-		Offset(0x96),	/* GPM98IN */
-		G8IS, 1,
-		G9IS, 1,
-		Offset(0x9A),	/* EnhanceControl */
-		,7,
-		HPDE, 1,
-		Offset(0xA8),	/* PIO7654Enable */
-		IO4E, 1,
-		IO5E, 1,
-		IO6E, 1,
-		IO7E, 1,
-		Offset(0xA9),	/* PIO7654Status */
-		IO4S, 1,
-		IO5S, 1,
-		IO6S, 1,
-		IO7S, 1,
-	}
-
-	/* PM1 Event Block
-	* First word is PM1_Status, Second word is PM1_Enable
-	*/
-	OperationRegion(P1EB, SystemIO, APEB, 0x04)
-		Field(P1EB, ByteAcc, NoLock, Preserve) {
-		TMST, 1,
-		,    3,
-		BMST,    1,
-		GBST,   1,
-		Offset(0x01),
-		PBST, 1,
-		, 1,
-		RTST, 1,
-		, 3,
-		PWST, 1,
-		SPWS, 1,
-		Offset(0x02),
-		TMEN, 1,
-		, 4,
-		GBEN, 1,
-		Offset(0x03),
-		PBEN, 1,
-		, 1,
-		RTEN, 1,
-		, 3,
-		PWDA, 1,
-	}
-
-	Scope(\_SB) {
-		/* PCIe Configuration Space for 16 busses */
-		OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
-			Field(PCFG, ByteAcc, NoLock, Preserve) {
-			/* Byte offsets are computed using the following technique:
-			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
-			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
-			*/
-			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
-			STB5, 32,
-			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
-			PT0D, 1,
-			PT1D, 1,
-			PT2D, 1,
-			PT3D, 1,
-			PT4D, 1,
-			PT5D, 1,
-			PT6D, 1,
-			PT7D, 1,
-			PT8D, 1,
-			PT9D, 1,
-			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
-			SBIE, 1,
-			SBME, 1,
-			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
-			SBRI, 8,
-			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
-			SBB1, 32,
-			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
-			,14,
-			P92E, 1,		/* Port92 decode enable */
-		}
-
-		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
-			Field(SB5, AnyAcc, NoLock, Preserve){
-			/* Port 0 */
-			Offset(0x120),		/* Port 0 Task file status */
-			P0ER, 1,
-			, 2,
-			P0DQ, 1,
-			, 3,
-			P0BY, 1,
-			Offset(0x128),		/* Port 0 Serial ATA status */
-			P0DD, 4,
-			, 4,
-			P0IS, 4,
-			Offset(0x12C),		/* Port 0 Serial ATA control */
-			P0DI, 4,
-			Offset(0x130),		/* Port 0 Serial ATA error */
-			, 16,
-			P0PR, 1,
-
-			/* Port 1 */
-			offset(0x1A0),		/* Port 1 Task file status */
-			P1ER, 1,
-			, 2,
-			P1DQ, 1,
-			, 3,
-			P1BY, 1,
-			Offset(0x1A8),		/* Port 1 Serial ATA status */
-			P1DD, 4,
-			, 4,
-			P1IS, 4,
-			Offset(0x1AC),		/* Port 1 Serial ATA control */
-			P1DI, 4,
-			Offset(0x1B0),		/* Port 1 Serial ATA error */
-			, 16,
-			P1PR, 1,
-
-			/* Port 2 */
-			Offset(0x220),		/* Port 2 Task file status */
-			P2ER, 1,
-			, 2,
-			P2DQ, 1,
-			, 3,
-			P2BY, 1,
-			Offset(0x228),		/* Port 2 Serial ATA status */
-			P2DD, 4,
-			, 4,
-			P2IS, 4,
-			Offset(0x22C),		/* Port 2 Serial ATA control */
-			P2DI, 4,
-			Offset(0x230),		/* Port 2 Serial ATA error */
-			, 16,
-			P2PR, 1,
-
-			/* Port 3 */
-			Offset(0x2A0),		/* Port 3 Task file status */
-			P3ER, 1,
-			, 2,
-			P3DQ, 1,
-			, 3,
-			P3BY, 1,
-			Offset(0x2A8),		/* Port 3 Serial ATA status */
-			P3DD, 4,
-			, 4,
-			P3IS, 4,
-			Offset(0x2AC),		/* Port 3 Serial ATA control */
-			P3DI, 4,
-			Offset(0x2B0),		/* Port 3 Serial ATA error */
-			, 16,
-			P3PR, 1,
-		}
-	}
+	/* #include <arch/x86/acpi/debug.asl> */	/* Include global debug methods if needed */
+	
+	#include "acpi/mainboard.asl"
 
+	#include <cpu/amd/agesa/family14/acpi/cpu.asl>
 
 	#include "acpi/routing.asl"
 
 	Scope(\_SB) {
+		/* global utility methods expected within the \_SB scope */
+		#include <arch/x86/acpi/globutil.asl>
 
-		Method(CkOT, 0){
-
-			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
-
-			if(CondRefOf(\_OSI,Local1))
-			{
-				Store(1, OSTP)                /* Assume some form of XP */
-				if (\_OSI("Windows 2006"))      /* Vista */
-				{
-					Store(2, OSTP)
-				}
-			} else {
-				If(WCMP(\_OS,"Linux")) {
-					Store(3, OSTP)            /* Linux */
-				} Else {
-					Store(4, OSTP)            /* Gotta be WinCE */
-				}
-			}
-			Return(OSTP)
-		}
-
-		Method(_PIC, 0x01, NotSerialized)
-		{
-			If (Arg0)
-			{
-				\_SB.CIRQ()
-			}
-			Store(Arg0, PMOD)
-		}
-		Method(CIRQ, 0x00, NotSerialized){
-			Store(0, PIRA)
-			Store(0, PIRB)
-			Store(0, PIRC)
-			Store(0, PIRD)
-			Store(0, PIRE)
-			Store(0, PIRF)
-			Store(0, PIRG)
-			Store(0, PIRH)
-		}
-
-		Name(IRQB, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Shared){15}
-		})
-
-		Name(IRQP, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
-		})
-
-		Name(PITF, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Exclusive){9}
-		})
-
-		Device(INTA) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 1)
-
-			Method(_STA, 0) {
-				if (PIRA) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTA._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
-				Store(0, PIRA)
-			} /* End Method(_SB.INTA._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTA._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRA, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTA._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRA)
-			} /* End Method(_SB.INTA._SRS) */
-		} /* End Device(INTA) */
-
-		Device(INTB) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 2)
-
-			Method(_STA, 0) {
-				if (PIRB) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTB._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
-				Store(0, PIRB)
-			} /* End Method(_SB.INTB._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTB._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRB, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTB._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRB)
-			} /* End Method(_SB.INTB._SRS) */
-		} /* End Device(INTB)  */
-
-		Device(INTC) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 3)
-
-			Method(_STA, 0) {
-				if (PIRC) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTC._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
-				Store(0, PIRC)
-			} /* End Method(_SB.INTC._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTC._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRC, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTC._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRC)
-			} /* End Method(_SB.INTC._SRS) */
-		} /* End Device(INTC)  */
-
-		Device(INTD) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 4)
-
-			Method(_STA, 0) {
-				if (PIRD) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTD._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
-				Store(0, PIRD)
-			} /* End Method(_SB.INTD._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTD._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRD, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTD._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRD)
-			} /* End Method(_SB.INTD._SRS) */
-		} /* End Device(INTD)  */
-
-		Device(INTE) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 5)
-
-			Method(_STA, 0) {
-				if (PIRE) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTE._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
-				Store(0, PIRE)
-			} /* End Method(_SB.INTE._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTE._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRE, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTE._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRE)
-			} /* End Method(_SB.INTE._SRS) */
-		} /* End Device(INTE)  */
-
-		Device(INTF) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 6)
-
-			Method(_STA, 0) {
-				if (PIRF) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTF._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
-				Store(0, PIRF)
-			} /* End Method(_SB.INTF._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
-				Return(PITF)
-			} /* Method(_SB.INTF._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRF, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTF._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRF)
-			} /*  End Method(_SB.INTF._SRS) */
-		} /* End Device(INTF)  */
-
-		Device(INTG) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 7)
-
-			Method(_STA, 0) {
-				if (PIRG) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTG._STA)  */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
-				Store(0, PIRG)
-			} /* End Method(_SB.INTG._DIS)  */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTG._CRS)  */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRG, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTG._CRS)  */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRG)
-			} /* End Method(_SB.INTG._SRS)  */
-		} /* End Device(INTG)  */
-
-		Device(INTH) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 8)
-
-			Method(_STA, 0) {
-				if (PIRH) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTH._STA)  */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
-				Store(0, PIRH)
-			} /* End Method(_SB.INTH._DIS)  */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTH._CRS)  */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRH, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTH._CRS)  */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRH)
-			} /* End Method(_SB.INTH._SRS)  */
-		} /* End Device(INTH)   */
-
-	}   /* End Scope(_SB)  */
-
-
-	/* Supported sleep states: */
-	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
-
-	If (LAnd(SSFG, 0x01)) {
-		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
-	}
-	If (LAnd(SSFG, 0x02)) {
-		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
-	}
-	If (LAnd(SSFG, 0x04)) {
-		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
-	}
-	If (LAnd(SSFG, 0x08)) {
-		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
-	}
-
-	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
-
-	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
-	Name(CSMS, 0)			/* Current System State */
-
-	/* Wake status package */
-	Name(WKST,Package(){Zero, Zero})
-
-	/*
-	* \_PTS - Prepare to Sleep method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
-	*
-	* Exit:
-	*		-none-
-	*
-	* The _PTS control method is executed at the beginning of the sleep process
-	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
-	* control method may be executed a relatively long time before entering the
-	* sleep state and the OS may abort	the operation without notification to
-	* the ACPI driver.  This method cannot modify the configuration or power
-	* state of any device in the system.
-	*/
-	Method(\_PTS, 1) {
-		/* DBGO("\\_PTS\n") */
-		/* DBGO("From S0 to S") */
-		/* DBGO(Arg0) */
-		/* DBGO("\n") */
-
-		/* Don't allow PCIRST# to reset USB */
-		if (LEqual(Arg0,3)){
-			Store(0,URRE)
-		}
-
-		/* Clear sleep SMI status flag and enable sleep SMI trap. */
-		/*Store(One, CSSM)
-		Store(One, SSEN)*/
-
-		/* On older chips, clear PciExpWakeDisEn */
-		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
-		*    	Store(0,\_SB.PWDE)
-		*}
-		*/
-
-		/* Clear wake status structure. */
-		Store(0, Index(WKST,0))
-		Store(0, Index(WKST,1))
-	} /* End Method(\_PTS) */
-
-	/*
-	*  The following method results in a "not a valid reserved NameSeg"
-	*  warning so I have commented it out for the duration.  It isn't
-	*  used, so it could be removed.
-	*
-	*
-	*  	\_GTS OEM Going To Sleep method
-	*
-	*  	Entry:
-	*  		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*  	Exit:
-	*  		-none-
-	*
-	*  Method(\_GTS, 1) {
-	*  DBGO("\\_GTS\n")
-	*  DBGO("From S0 to S")
-	*  DBGO(Arg0)
-	*  DBGO("\n")
-	*  }
-	*/
-
-	/*
-	*	\_BFS OEM Back From Sleep method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*	Exit:
-	*		-none-
-	*/
-	Method(\_BFS, 1) {
-		/* DBGO("\\_BFS\n") */
-		/* DBGO("From S") */
-		/* DBGO(Arg0) */
-		/* DBGO(" to S0\n") */
-	}
-
-	/*
-	*  \_WAK System Wake method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*	Exit:
-	*		Return package of 2 DWords
-	*		Dword 1 - Status
-	*			0x00000000	wake succeeded
-	*			0x00000001	Wake was signaled but failed due to lack of power
-	*			0x00000002	Wake was signaled but failed due to thermal condition
-	*		Dword 2 - Power Supply state
-	*			if non-zero the effective S-state the power supply entered
-	*/
-	Method(\_WAK, 1) {
-		/* DBGO("\\_WAK\n") */
-		/* DBGO("From S") */
-		/* DBGO(Arg0) */
-		/* DBGO(" to S0\n") */
-
-		/* Re-enable HPET */
-		Store(1,HPDE)
-
-		/* Restore PCIRST# so it resets USB */
-		if (LEqual(Arg0,3)){
-			Store(1,URRE)
-		}
-
-		/* Arbitrarily clear PciExpWakeStatus */
-		Store(PWST, PWST)
-
-		/* if(DeRefOf(Index(WKST,0))) {
-		*	Store(0, Index(WKST,1))
-		* } else {
-		*	Store(Arg0, Index(WKST,1))
-		* }
-		*/
-		Return(WKST)
-	} /* End Method(\_WAK) */
-
-	Scope(\_GPE) {	/* Start Scope GPE */
-		/*  General event 0  */
-		/* Method(_L00) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 1  */
-		/* Method(_L01) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 2  */
-		/* Method(_L02) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 3  */
-		Method(_L03) {
-			/* DBGO("\\_GPE\\_L00\n") */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  General event 4  */
-		/* Method(_L04) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 5  */
-		/* Method(_L05) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 6 - Used for GPM6, moved to USB.asl */
-		/* Method(_L06) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 7 - Used for GPM7, moved to USB.asl */
-		/* Method(_L07) {
-		*	DBGO("\\_GPE\\_L07\n")
-		* }
-		*/
-
-		/*  Legacy PM event  */
-		Method(_L08) {
-			/* DBGO("\\_GPE\\_L08\n") */
-		}
-
-		/*  Temp warning (TWarn) event  */
-		Method(_L09) {
-			/* DBGO("\\_GPE\\_L09\n") */
-			/* Notify (\_TZ.TZ00, 0x80) */
-		}
-
-		/*  Reserved  */
-		/* Method(_L0A) {
-		*	DBGO("\\_GPE\\_L0A\n")
-		* }
-		*/
-
-		/*  USB controller PME#  */
-		Method(_L0B) {
-			/* DBGO("\\_GPE\\_L0B\n") */
-			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  AC97 controller PME#  */
-		/* Method(_L0C) {
-		*	DBGO("\\_GPE\\_L0C\n")
-		* }
-		*/
-
-		/*  OtherTherm PME#  */
-		/* Method(_L0D) {
-		*	DBGO("\\_GPE\\_L0D\n")
-		* }
-		*/
-
-		/*  GPM9 SCI event - Moved to USB.asl */
-		/* Method(_L0E) {
-		*	DBGO("\\_GPE\\_L0E\n")
-		* }
-		*/
-
-		/*  PCIe HotPlug event  */
-		/* Method(_L0F) {
-		* 	DBGO("\\_GPE\\_L0F\n")
-		* }
-		*/
-
-		/*  ExtEvent0 SCI event  */
-		Method(_L10) {
-			/* DBGO("\\_GPE\\_L10\n") */
-		}
-
-
-		/*  ExtEvent1 SCI event  */
-		Method(_L11) {
-			/* DBGO("\\_GPE\\_L11\n") */
-		}
-
-		/*  PCIe PME# event  */
-		/* Method(_L12) {
-		*	DBGO("\\_GPE\\_L12\n")
-		* }
-		*/
-
-		/*  GPM0 SCI event - Moved to USB.asl */
-		/* Method(_L13) {
-		* 	DBGO("\\_GPE\\_L13\n")
-		* }
-		*/
-
-		/*  GPM1 SCI event - Moved to USB.asl */
-		/* Method(_L14) {
-		* 	DBGO("\\_GPE\\_L14\n")
-		* }
-		*/
-
-		/*  GPM2 SCI event - Moved to USB.asl */
-		/* Method(_L15) {
-		* 	DBGO("\\_GPE\\_L15\n")
-		* }
-		*/
-
-		/*  GPM3 SCI event - Moved to USB.asl */
-		/* Method(_L16) {
-		*	DBGO("\\_GPE\\_L16\n")
-		* }
-		*/
-
-		/*  GPM8 SCI event - Moved to USB.asl */
-		/* Method(_L17) {
-		* 	DBGO("\\_GPE\\_L17\n")
-		* }
-		*/
-
-		/*  GPIO0 or GEvent8 event  */
-		Method(_L18) {
-			/* DBGO("\\_GPE\\_L18\n") */
-			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  GPM4 SCI event - Moved to USB.asl */
-		/* Method(_L19) {
-		* 	DBGO("\\_GPE\\_L19\n")
-		* }
-		*/
-
-		/*  GPM5 SCI event - Moved to USB.asl */
-		/* Method(_L1A) {
-		*	DBGO("\\_GPE\\_L1A\n")
-		* }
-		*/
-
-		/*  Azalia SCI event  */
-		Method(_L1B) {
-			/* DBGO("\\_GPE\\_L1B\n") */
-			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  GPM6 SCI event - Reassigned to _L06 */
-		/* Method(_L1C) {
-		*	DBGO("\\_GPE\\_L1C\n")
-		* }
-		*/
-
-		/*  GPM7 SCI event - Reassigned to _L07 */
-		/* Method(_L1D) {
-		*	DBGO("\\_GPE\\_L1D\n")
-		* }
-		*/
-
-		/*  GPIO2 or GPIO66 SCI event  */
-		/* Method(_L1E) {
-		* 	DBGO("\\_GPE\\_L1E\n")
-		* }
-		*/
-
-		/*  SATA SCI event - Moved to sata.asl */
-		/* Method(_L1F) {
-		*	 DBGO("\\_GPE\\_L1F\n")
-		* }
-		*/
-
-	} 	/* End Scope GPE */
-
-	#include "acpi/usb.asl"
-
-	/* South Bridge */
-	Scope(\_SB) { /* Start \_SB scope */
-		#include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */
-
-		/*  _SB.PCI0 */
-		/* Note: Only need HID on Primary Bus */
 		Device(PCI0) {
-			External (TOM1)
-			External (TOM2)
-			Name(_HID, EISAID("PNP0A08"))	/* PCI Express Root Bridge */
-			Name(_CID, EISAID("PNP0A03"))	/* PCI Root Bridge */
-			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
-
-			/* Operating System Capabilities Method */
-			Method(_OSC,4)
-			{	/* Check for proper PCI/PCIe UUID */
-				If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
-				{
-					/* Let OS control everything */
-					Return (Arg3)
-				}
-			}
-
-			Method(_BBN, 0) { /* Bus number = 0 */
-				Return(0)
-			}
-			Method(_STA, 0) {
-				/* DBGO("\\_SB\\PCI0\\_STA\n") */
-				Return(0x0B)     /* Status is visible */
-			}
-
-			Method(_PRT,0) {
-				If(PMOD){ Return(APR0) }   /* APIC mode */
-				Return (PR0)                  /* PIC Mode */
-			} /* end _PRT */
-
-			/* Describe the Northbridge devices */
-			Device(AMRT) {
-				Name(_ADR, 0x00000000)
-			} /* end AMRT */
-
-			/* The internal GFX bridge */
-			Device(AGPB) {
-				Name(_ADR, 0x00010000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					Return (APR1)
-				}
-			}  /* end AGPB */
-
-			/* The external GFX bridge */
-			Device(PBR2) {
-				Name(_ADR, 0x00020000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS2) }   /* APIC mode */
-					Return (PS2)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR2 */
-
-			/* Dev3 is also an external GFX bridge, not used in Herring */
-
-			Device(PBR4) {
-				Name(_ADR, 0x00040000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS4) }   /* APIC mode */
-					Return (PS4)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR4 */
-
-			Device(PBR5) {
-				Name(_ADR, 0x00050000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS5) }   /* APIC mode */
-					Return (PS5)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR5 */
-
-			Device(PBR6) {
-				Name(_ADR, 0x00060000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS6) }   /* APIC mode */
-					Return (PS6)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR6 */
-
-			/* The onboard EtherNet chip */
-			Device(PBR7) {
-				Name(_ADR, 0x00070000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS7) }   /* APIC mode */
-					Return (PS7)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR7 */
-
-			/* GPP */
-			Device(PBR9) {
-				Name(_ADR, 0x00090000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS9) }   /* APIC mode */
-					Return (PS9)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR9 */
-
-			Device(PBRa) {
-				Name(_ADR, 0x000A0000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APSa) }   /* APIC mode */
-					Return (PSa)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBRa */
-
-			Device(PE20) {
-				Name(_ADR, 0x00150000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APE0) }   /* APIC mode */
-					Return (PE0)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PE20 */
-			Device(PE21) {
-				Name(_ADR, 0x00150001)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APE1) }   /* APIC mode */
-					Return (PE1)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PE21 */
-			Device(PE22) {
-				Name(_ADR, 0x00150002)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APE2) }   /* APIC mode */
-					Return (APE2)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PE22 */
-			Device(PE23) {
-				Name(_ADR, 0x00150003)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APE3) }   /* APIC mode */
-					Return (PE3)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PE23 */
-
-			/* PCI slot 1, 2, 3 */
-			Device(PIBR) {
-				Name(_ADR, 0x00140004)
-				Name(_PRW, Package() {0x18, 4})
-
-				Method(_PRT, 0) {
-					Return (PCIB)
-				}
-			}
 
-			/* Describe the Southbridge devices */
-			Device(STCR) {
-				Name(_ADR, 0x00110000)
-				#include "acpi/sata.asl"
-			} /* end STCR */
+			/* Describe the AMD Northbridge */
+			#include <northbridge/amd/agesa/family14/acpi/northbridge.asl>
 
-			Device(UOH1) {
-				Name(_ADR, 0x00120000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH1 */
+			/* Describe the AMD Fusion Controller Hub Southbridge */
+			#include <southbridge/amd/cimx/sb800/acpi/fch.asl>
 
-			Device(UOH2) {
-				Name(_ADR, 0x00120002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH2 */
-
-			Device(UOH3) {
-				Name(_ADR, 0x00130000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH3 */
-
-			Device(UOH4) {
-				Name(_ADR, 0x00130002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH4 */
-
-			Device(UOH5) {
-				Name(_ADR, 0x00160000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH5 */
-
-			Device(UOH6) {
-				Name(_ADR, 0x00160002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH5 */
-
-			Device(UEH1) {
-				Name(_ADR, 0x00140005)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UEH1 */
-
-			Device(SBUS) {
-				Name(_ADR, 0x00140000)
-			} /* end SBUS */
-
-			/* Primary (and only) IDE channel */
-			Device(IDEC) {
-				Name(_ADR, 0x00140001)
-				#include "acpi/ide.asl"
-			} /* end IDEC */
-
-			Device(AZHD) {
-				Name(_ADR, 0x00140002)
-				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
-					Field(AZPD, AnyAcc, NoLock, Preserve) {
-					offset (0x42),
-					NSDI, 1,
-					NSDO, 1,
-					NSEN, 1,
-					offset (0x44),
-					IPCR, 4,
-					offset (0x54),
-					PWST, 2,
-					, 6,
-					PMEB, 1,
-					, 6,
-					PMST, 1,
-					offset (0x62),
-					MMCR, 1,
-					offset (0x64),
-					MMLA, 32,
-					offset (0x68),
-					MMHA, 32,
-					offset (0x6C),
-					MMDT, 16,
-				}
-			} /* end AZHD */
-
-			Device(LIBR) {
-				Name(_ADR, 0x00140003)
-				/* Method(_INI) {
-				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
-				} */ /* End Method(_SB.SBRDG._INI) */
-
-				/* Real Time Clock Device */
-				Device(RTC0) {
-					Name(_HID, EISAID("PNP0B00"))   /* AT Real Time Clock (not PIIX4 compatible) */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){8}
-						IO(Decode16,0x0070, 0x0070, 0, 2)
-						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
-
-				Device(TMR) {	/* Timer */
-					Name(_HID,EISAID("PNP0100"))	/* System Timer */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){0}
-						IO(Decode16, 0x0040, 0x0040, 0, 4)
-						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
-
-				Device(SPKR) {	/* Speaker */
-					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
-					Name(_CRS, ResourceTemplate() {
-						IO(Decode16, 0x0061, 0x0061, 0, 1)
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
-
-				Device(PIC) {
-					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){2}
-						IO(Decode16,0x0020, 0x0020, 0, 2)
-						IO(Decode16,0x00A0, 0x00A0, 0, 2)
-						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
-						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
-
-				Device(MAD) { /* 8257 DMA */
-					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
-					Name(_CRS, ResourceTemplate() {
-						DMA(Compatibility,BusMaster,Transfer8){4}
-						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
-						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
-						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
-						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
-						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
-						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
-					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
-				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
-
-				Device(COPR) {
-					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
-					Name(_CRS, ResourceTemplate() {
-						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
-						IRQNoFlags(){13}
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
-#if 0
-				Device(HPTM) {
-					Name(_HID,EISAID("PNP0103"))
-					Name(CRS,ResourceTemplate()	{
-						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT)	/* 1kb reserved space */
-					})
-					Method(_STA, 0) {
-						Return(0x0F) /* sata is visible */
-					}
-					Method(_CRS, 0)	{
-						CreateDwordField(CRS, ^HPT._BAS, HPBA)
-						Store(HPBA, HPBA)
-						Return(CRS)
-					}
-				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
-#endif
-			} /* end LIBR */
-
-			Device(HPBR) {
-				Name(_ADR, 0x00140004)
-			} /* end HostPciBr */
-
-			Device(ACAD) {
-				Name(_ADR, 0x00140005)
-			} /* end Ac97audio */
-
-			Device(ACMD) {
-				Name(_ADR, 0x00140006)
-			} /* end Ac97modem */
-
-			Name(CRES, ResourceTemplate() {
-				/* Set the Bus number and Secondary Bus number for the PCI0 device
-				 * The Secondary bus range for PCI0 lets the system
-				 * know what bus values are allowed on the downstream
-				 * side of this PCI bus if there is a PCI-PCI bridge.
-				 * PCI busses can have 256 secondary busses which
-				 * range from [0-0xFF] but they do not need to be
-				 * sequential.
-				 */
-				WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
-					0x0000,		/* address granularity */
-					0x0000,		/* range minimum */
-					0x00FF,		/* range maximum */
-					0x0000,		/* translation */
-					0x0100,		/* length */
-					,, PSB0)	/* ResourceSourceIndex, ResourceSource, DescriptorName */
-
-				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
-
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0000,			/* range minimum */
-					0x0CF7,			/* range maximum */
-					0x0000,			/* translation */
-					0x0CF8			/* length */
-				)
-
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0D00,			/* range minimum */
-					0xFFFF,			/* range maximum */
-					0x0000,			/* translation */
-					0xF300			/* length */
-				)
-
-				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
-#if 0
-				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
-				Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS)   /* BIOS ROM area */
-
-				/* DRAM Memory from 1MB to TopMem */
-				Memory32Fixed(READWRITE, 0x00100000, 0, DMLO)	/* 1MB to TopMem */
-
-				/* BIOS space just below 4GB */
-				DWORDMemory(
-					ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
-					0x00,			/* Granularity */
-					0x00000000,		/* Min */
-					0x00000000,		/* Max */
-					0x00000000,		/* Translation */
-					0x00000001,		/* Max-Min, RLEN */
-					,,
-					PCBM
-				)
-
-				/* DRAM memory from 4GB to TopMem2 */
-				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
-					0x00000000,		/* Granularity */
-					0x00000000,		/* Min */
-					0x00000000,		/* Max */
-					0x00000000,		/* Translation */
-					0x00000001,		/* Max-Min, RLEN */
-					,,
-					DMHI
-				)
-
-				/* BIOS space just below 16EB */
-				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
-					0x00000000,		/* Granularity */
-					0x00000000,		/* Min */
-					0x00000000,		/* Max */
-					0x00000000,		/* Translation */
-					0x00000001,		/* Max-Min, RLEN */
-					,,
-					PEBM
-				)
-#endif
-                                /* memory space for PCI BARs below 4GB */
-                                Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
-			}) /* End Name(_SB.PCI0.CRES) */
-
-			Method(_CRS, 0) {
-				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
-#if 0
-				CreateDWordField(CRES, ^EMM1._BAS, EM1B)
-				CreateDWordField(CRES, ^EMM1._LEN, EM1L)
-				CreateDWordField(CRES, ^DMLO._BAS, DMLB)
-				CreateDWordField(CRES, ^DMLO._LEN, DMLL)
-				CreateDWordField(CRES, ^PCBM._MIN, PBMB)
-				CreateDWordField(CRES, ^PCBM._LEN, PBML)
-
-				CreateQWordField(CRES, ^DMHI._MIN, DMHB)
-				CreateQWordField(CRES, ^DMHI._LEN, DMHL)
-				CreateQWordField(CRES, ^PEBM._MIN, EBMB)
-				CreateQWordField(CRES, ^PEBM._LEN, EBML)
-
-				If(LGreater(LOMH, 0xC0000)){
-					Store(0xC0000, EM1B)	/* Hole above C0000 and below E0000 */
-					Subtract(LOMH, 0xC0000, EM1L)	/* subtract start, assumes allocation from C0000 going up */
-				}
-
-				/* Set size of memory from 1MB to TopMem */
-				Subtract(TOM1, 0x100000, DMLL)
-
-				/*
-				* If(LNotEqual(TOM2, 0x00000000)){
-				*	Store(0x100000000,DMHB)			DRAM from 4GB to TopMem2
-				*	Subtract(TOM2, 0x100000000, DMHL)
-				* }
-				*/
-
-				/* If there is no memory above 4GB, put the BIOS just below 4GB */
-				If(LEqual(TOM2, 0x00000000)){
-					Store(PBAD,PBMB)			/* Reserve the "BIOS" space */
-					Store(PBLN,PBML)
-				}
-				Else {  /* Otherwise, put the BIOS just below 16EB */
-					ShiftLeft(PBAD,16,EBMB)		/* Reserve the "BIOS" space */
-					Store(PBLN,EBML)
-				}
-#endif
-				CreateDWordField(CRES, ^MMIO._BAS, MM1B)
-                                CreateDWordField(CRES, ^MMIO._LEN, MM1L)
-                                /*
-                                 * Declare memory between TOM1 and 4GB as available
-                                 * for PCI MMIO.
-                                 * Use ShiftLeft to avoid 64bit constant (for XP).
-                                 * This will work even if the OS does 32bit arithmetic, as
-                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
-                                 * result as 64bit (0x100000000 - TOM1).
-                                 */
-                                Store(TOM1, MM1B)
-                                ShiftLeft(0x10000000, 4, Local0)
-                                Subtract(Local0, TOM1, Local0)
-                                Store(Local0, MM1L)
-
-				Return(CRES) /* note to change the Name buffer */
-			} /* end of Method(_SB.PCI0._CRS) */
-
-			/*
-			*
-			*               FIRST METHOD CALLED UPON BOOT
-			*
-			*  1. If debugging, print current OS and ACPI interpreter.
-			*  2. Get PCI Interrupt routing from ACPI VSM, this
-			*     value is based on user choice in BIOS setup.
-			*/
-			Method(_INI, 0) {
-				/* DBGO("\\_SB\\_INI\n") */
-				/* DBGO("   DSDT.ASL code from ") */
-				/* DBGO(__DATE__) */
-				/* DBGO(" ") */
-				/* DBGO(__TIME__) */
-				/* DBGO("\n   Sleep states supported: ") */
-				/* DBGO("\n") */
-				/* DBGO("   \\_OS=") */
-				/* DBGO(\_OS) */
-				/* DBGO("\n   \\_REV=") */
-				/* DBGO(\_REV) */
-				/* DBGO("\n") */
-
-				/* Determine the OS we're running on */
-				CkOT()
-
-				/* On older chips, clear PciExpWakeDisEn */
-				/*if (LLessEqual(\SBRI, 0x13)) {
-				*    	Store(0,\PWDE)
-				* }
-				*/
-			} /* End Method(_SB._INI) */
-		} /* End Device(PCI0)  */
-
-		Device(PWRB) {	/* Start Power button device */
-			Name(_HID, EISAID("PNP0C0C"))
-			Name(_UID, 0xAA)
-			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
-			Name(_STA, 0x0B) /* sata is invisible */
-		}
-	} /* End \_SB scope */
-
-	Scope(\_SI) {
-		Method(_SST, 1) {
-			/* DBGO("\\_SI\\_SST\n") */
-			/* DBGO("   New Indicator state: ") */
-			/* DBGO(Arg0) */
-			/* DBGO("\n") */
 		}
-	} /* End Scope SI */
-#if 0
-	/* SMBUS Support */
-	Mutex (SBX0, 0x00)
-	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
-		Field (SMB0, ByteAcc, NoLock, Preserve) {
-			HSTS,   8, /* SMBUS status */
-			SSTS,   8,  /* SMBUS slave status */
-			HCNT,   8,  /* SMBUS control */
-			HCMD,   8,  /* SMBUS host cmd */
-			HADD,   8,  /* SMBUS address */
-			DAT0,   8,  /* SMBUS data0 */
-			DAT1,   8,  /* SMBUS data1 */
-			BLKD,   8,  /* SMBUS block data */
-			SCNT,   8,  /* SMBUS slave control */
-			SCMD,   8,  /* SMBUS shaow cmd */
-			SEVT,   8,  /* SMBUS slave event */
-			SDAT,   8  /* SMBUS slave data */
-	}
-
-	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
-		Store (0x1E, HSTS)
-		Store (0xFA, Local0)
-		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
-			Stall (0x64)
-			Decrement (Local0)
-		}
-
-		Return (Local0)
-	}
-
-	Method (SWTC, 1, NotSerialized) {
-		Store (Arg0, Local0)
-		Store (0x07, Local2)
-		Store (One, Local1)
-		While (LEqual (Local1, One)) {
-			Store (And (HSTS, 0x1E), Local3)
-			If (LNotEqual (Local3, Zero)) { /* read sucess */
-				If (LEqual (Local3, 0x02)) {
-					Store (Zero, Local2)
-				}
-
-				Store (Zero, Local1)
-			}
-			Else {
-				If (LLess (Local0, 0x0A)) { /* read failure */
-					Store (0x10, Local2)
-					Store (Zero, Local1)
-				}
-				Else {
-					Sleep (0x0A) /* 10 ms, try again */
-					Subtract (Local0, 0x0A, Local0)
-				}
-			}
-		}
-
-		Return (Local2)
-	}
-
-	Method (SMBR, 3, NotSerialized) {
-		Store (0x07, Local0)
-		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
-			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
-			If (LEqual (Local0, Zero)) {
-				Release (SBX0)
-				Return (0x0)
-			}
-
-			Store (0x1F, HSTS)
-			Store (Or (ShiftLeft (Arg1, One), One), HADD)
-			Store (Arg2, HCMD)
-			If (LEqual (Arg0, 0x07)) {
-				Store (0x48, HCNT) /* read byte */
-			}
-
-			Store (SWTC (0x03E8), Local1) /* 1000 ms */
-			If (LEqual (Local1, Zero)) {
-				If (LEqual (Arg0, 0x07)) {
-					Store (DAT0, Local0)
-				}
-			}
-			Else {
-				Store (Local1, Local0)
-			}
-
-			Release (SBX0)
-		}
-
-		/* DBGO("the value of SMBusData0 register ") */
-		/* DBGO(Arg2) */
-		/* DBGO(" is ") */
-		/* DBGO(Local0) */
-		/* DBGO("\n") */
-
-		Return (Local0)
-	}
-
-	/* THERMAL */
-	Scope(\_TZ) {
-		Name (KELV, 2732)
-		Name (THOT, 800)
-		Name (TCRT, 850)
-
-		ThermalZone(TZ00) {
-			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
-				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
-				Return(Add(0, 2730))
-			}
-			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
-				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
-				Return(Package() {\_TZ.TZ00.FAN0})
-			}
-			Device (FAN0) {
-				Name(_HID, EISAID("PNP0C0B"))
-				Name(_PR0, Package() {PFN0})
-			}
-
-			PowerResource(PFN0,0,0) {
-				Method(_STA) {
-					Store(0xF,Local0)
-					Return(Local0)
-				}
-				Method(_ON) {
-					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
-				}
-				Method(_OFF) {
-					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
-				}
-			}
+	}   /* End Scope(_SB)  */
 
-			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
-				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
-				Return (Add (THOT, KELV))
-			}
-			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
-				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
-				Return (Add (TCRT, KELV))
-			}
-			Method(_TMP,0) {	/* return current temp of this zone */
-				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
-				If (LGreater (Local0, 0x10)) {
-					Store (Local0, Local1)
-				}
-				Else {
-					Add (Local0, THOT, Local0)
-					Return (Add (400, KELV))
-				}
+	/* Contains the supported sleep states for this chipset */
+	#include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl>
 
-				Store (SMBR (0x07, 0x4C, 0x01), Local0)
-				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
-				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
-				If (LGreater (Local0, 0x10)) {
-					If (LGreater (Local0, Local1)) {
-						Store (Local0, Local1)
-					}
+	/* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+	#include "acpi/sleep.asl"
 
-					Multiply (Local1, 10, Local1)
-					Return (Add (Local1, KELV))
-				}
-				Else {
-					Add (Local0, THOT, Local0)
-					Return (Add (400 , KELV))
-				}
-			} /* end of _TMP */
-		} /* end of TZ00 */
-	}
-#endif
+	#include "acpi/gpe.asl"
+	#include <southbridge/amd/cimx/sb800/acpi/smbus.asl>
+	#include "acpi/thermal.asl"
 }
 /* End of ASL file */