AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5483 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 269 insertions, 0 deletions

diff --git a/src/mainboard/amd/tilapia_fam10/mainboard.c b/src/mainboard/amd/tilapia_fam10/mainboard.c
new file mode 100644
index 0000000000..b2b0525503
--- /dev/null
+++ b/src/mainboard/amd/tilapia_fam10/mainboard.c
@@ -0,0 +1,269 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <southbridge/amd/sb700/sb700.h>
+#include "chip.h"
+
+#define ADT7461_ADDRESS 0x4C
+#define ARA_ADDRESS     0x0C /* Alert Response Address */
+
+extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
+extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
+			       u8 val);
+
+#define ADT7461_read_byte(address) \
+	do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
+#define ARA_read_byte(address) \
+	do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
+#define ADT7461_write_byte(address, val) \
+	do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
+
+#define SMBUS_IO_BASE 0x6000
+
+uint64_t uma_memory_base, uma_memory_size;
+
+void set_pcie_dereset(void);
+void set_pcie_reset(void);
+
+void set_pcie_dereset()
+{
+	u8 byte;
+	u16 word;
+	device_t sm_dev;
+	/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
+	/* set 0 to bit2 :disable GPM8 as AZ_RST output */
+	byte = pm_ioread(0x8d);
+	byte &= ~((1 << 1) | (1 << 2));
+	pm_iowrite(0x8d, byte);
+
+	/* set the GPM8 and GPM9 output enable and the value to 1 */
+	byte = pm_ioread(0x94);
+	byte &= ~((1 << 2) | (1 << 3));
+	byte |=  ((1 << 0) | (1 << 1));
+	pm_iowrite(0x94, byte);
+
+	/* set the GPIO65 output enable and the value is 1 */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+	word = pci_read_config16(sm_dev, 0x7e);
+	word |= (1 << 0);
+	word &= ~(1 << 4);
+	pci_write_config16(sm_dev, 0x7e, word);
+}
+
+void set_pcie_reset()
+{
+	u8 byte;
+	u16 word;
+	device_t sm_dev;
+
+	/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
+	/* set 0 to bit2 :disable GPM8 as AZ_RST output */
+	byte = pm_ioread(0x8d);
+	byte &= ~((1 << 1) | (1 << 2));
+	pm_iowrite(0x8d, byte);
+
+	/* set the GPM8 and GPM9 output enable and the value to 0 */
+	byte = pm_ioread(0x94);
+	byte &= ~((1 << 2) | (1 << 3));
+	byte &= ~((1 << 0) | (1 << 1));
+	pm_iowrite(0x94, byte);
+
+	/* set the GPIO65 output enable and the value is 0 */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+	word = pci_read_config16(sm_dev, 0x7e);
+	word &= ~(1 << 0);
+	word &= ~(1 << 4);
+	pci_write_config16(sm_dev, 0x7e, word);
+}
+
+#if 0	     /* TODO: */
+/********************************************************
+* tilapia uses SB700 GPIO8 to detect IDE_DMA66.
+* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to
+* get the cable type, 40 pin or 80 pin?
+********************************************************/
+static void get_ide_dma66(void)
+{
+	u8 byte;
+	/*u32 sm_dev, ide_dev; */
+	device_t sm_dev, ide_dev;
+
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+	byte = pci_read_config8(sm_dev, 0xA9);
+	byte |= (1 << 4);	/* Set Gpio8 as input */
+	pci_write_config8(sm_dev, 0xA9, byte);
+
+	ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
+	byte = pci_read_config8(ide_dev, 0x56);
+	byte &= ~(7 << 0);
+	if ((1 << 4) & pci_read_config8(sm_dev, 0xAA))
+		byte |= 2 << 0;	/* mode 2 */
+	else
+		byte |= 5 << 0;	/* mode 5 */
+	pci_write_config8(ide_dev, 0x56, byte);
+}
+#endif
+
+/*
+ * set thermal config
+ */
+static void set_thermal_config(void)
+{
+	u8 byte;
+	u16 word;
+	device_t sm_dev;
+
+	/* set ADT 7461 */
+	ADT7461_write_byte(0x0B, 0x50);	/* Local Temperature Hight limit */
+	ADT7461_write_byte(0x0C, 0x00);	/* Local Temperature Low limit */
+	ADT7461_write_byte(0x0D, 0x50);	/* External Temperature Hight limit  High Byte */
+	ADT7461_write_byte(0x0E, 0x00);	/* External Temperature Low limit High Byte */
+
+	ADT7461_write_byte(0x19, 0x55);	/* External THERM limit */
+	ADT7461_write_byte(0x20, 0x55);	/* Local THERM limit */
+
+	byte = ADT7461_read_byte(0x02);	/* read status register to clear it */
+	ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
+	printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
+
+	/* sb700 settings for thermal config */
+	/* set SB700 GPIO 64 to GPIO with pull-up */
+	byte = pm2_ioread(0x42);
+	byte &= 0x3f;
+	pm2_iowrite(0x42, byte);
+
+	/* set GPIO 64 to input */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+	word = pci_read_config16(sm_dev, 0x56);
+	word |= 1 << 7;
+	pci_write_config16(sm_dev, 0x56, word);
+
+	/* set GPIO 64 internal pull-up */
+	byte = pm2_ioread(0xf0);
+	byte &= 0xee;
+	pm2_iowrite(0xf0, byte);
+
+	/* set Talert to be active low */
+	byte = pm_ioread(0x67);
+	byte &= ~(1 << 5);
+	pm_iowrite(0x67, byte);
+
+	/* set Talert to generate ACPI event */
+	byte = pm_ioread(0x3c);
+	byte &= 0xf3;
+	pm_iowrite(0x3c, byte);
+
+	/* THERMTRIP pin */
+	/* byte = pm_ioread(0x68);
+	 * byte |= 1 << 3;
+	 * pm_iowrite(0x68, byte);
+	 *
+	 * byte = pm_ioread(0x55);
+	 * byte |= 1 << 0;
+	 * pm_iowrite(0x55, byte);
+	 *
+	 * byte = pm_ioread(0x67);
+	 * byte &= ~( 1 << 6);
+	 * pm_iowrite(0x67, byte);
+	 */
+}
+
+/*************************************************
+* enable the dedicated function in tilapia board.
+* This function called early than rs780_enable.
+*************************************************/
+static void tilapia_enable(device_t dev)
+{
+	/* Leave it for furture use. */
+	/* struct mainboard_config *mainboard =
+	   (struct mainboard_config *)dev->chip_info; */
+
+	printk(BIOS_INFO, "Mainboard TILAPIA Enable. dev=0x%p\n", dev);
+
+#if (CONFIG_GFXUMA == 1)
+	msr_t msr, msr2;
+
+	/* TOP_MEM: the top of DRAM below 4G */
+	msr = rdmsr(TOP_MEM);
+	printk(BIOS_INFO,
+	    "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+	     __func__, msr.lo, msr.hi);
+
+	/* TOP_MEM2: the top of DRAM above 4G */
+	msr2 = rdmsr(TOP_MEM2);
+	printk(BIOS_INFO,
+	    "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+	     __func__, msr2.lo, msr2.hi);
+
+	switch (msr.lo) {
+	case 0x10000000:	/* 256M system memory */
+		uma_memory_size = 0x4000000;	/* 64M recommended UMA */
+		break;
+
+	case 0x20000000:	/* 512M system memory */
+		uma_memory_size = 0x8000000;	/* 128M recommended UMA */
+		break;
+
+	default:		/* 1GB and above system memory */
+		uma_memory_size = 0x10000000;	/* 256M recommended UMA */
+		break;
+	}
+
+	uma_memory_base = msr.lo - uma_memory_size;	/* TOP_MEM1 */
+	printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
+		    __func__, uma_memory_size, uma_memory_base);
+
+	/* TODO: TOP_MEM2 */
+#else
+	uma_memory_size = 0x8000000;	/* 128M recommended UMA */
+	uma_memory_base = 0x38000000;	/* 1GB  system memory supposed */
+#endif
+
+	set_pcie_dereset();
+	/* get_ide_dma66(); */
+	set_thermal_config();
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+	/* UMA is removed from system memory in the northbridge code, but
+	 * in some circumstances we want the memory mentioned as reserved.
+ 	 */
+#if (CONFIG_GFXUMA == 1)
+	printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
+		    uma_memory_base, uma_memory_size);
+	lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
+			    uma_memory_size);
+#endif
+	return 0;
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME("AMD TILAPIA   Mainboard")
+	.enable_dev = tilapia_enable,
+};