Add CONFIG_GENERATE_* for tables so that the user can select which tables not

to build, but by default all the tables that are available are built.

Make PIRQ table build for qemu.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 16 insertions, 15 deletions

diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb
index 9a3b6d93ad..68255eee8c 100644
--- a/src/mainboard/amd/dbm690t/Config.lb
+++ b/src/mainboard/amd/dbm690t/Config.lb
@@ -33,13 +33,13 @@ driver mainboard.o
 
 #dir /drivers/si/3114
 
-if CONFIG_HAVE_MP_TABLE object mptable.o end
-if CONFIG_HAVE_PIRQ_TABLE
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE
 	object get_bus_conf.o
 	object irq_tables.o
 end
 
-if CONFIG_HAVE_ACPI_TABLES
+if CONFIG_GENERATE_ACPI_TABLES
 	object acpi_tables.o
 	object fadt.o
 	makerule dsdt.c
diff --git a/src/mainboard/amd/dbm690t/Kconfig b/src/mainboard/amd/dbm690t/Kconfig
index 75f9692665..f497bbac77 100644
--- a/src/mainboard/amd/dbm690t/Kconfig
+++ b/src/mainboard/amd/dbm690t/Kconfig
@@ -9,6 +9,7 @@ config BOARD_AMD_DBM690T
 	select SOUTHBRIDGE_AMD_SB600
 	select SUPERIO_ITE_IT8712F
 	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
 	select USE_PRINTK_IN_CAR
 	select USE_DCACHE_RAM
 	select HAVE_HARD_RESET
diff --git a/src/mainboard/amd/dbm690t/Makefile.inc b/src/mainboard/amd/dbm690t/Makefile.inc
index 0a2460d166..317f9ca1c5 100644
--- a/src/mainboard/amd/dbm690t/Makefile.inc
+++ b/src/mainboard/amd/dbm690t/Makefile.inc
@@ -23,11 +23,11 @@ driver-y += mainboard.o
 
 # Needed by irq_tables and mptable and acpi_tables.
 obj-y += get_bus_conf.o
-obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
-obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o
+obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
+obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o
 
 # This is part of the conversion to init-obj and away from included code.
 
diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb
index 467c91ea36..92378ebb10 100644
--- a/src/mainboard/amd/dbm690t/Options.lb
+++ b/src/mainboard/amd/dbm690t/Options.lb
@@ -19,9 +19,9 @@
 ##
 ##
 
-uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_HAVE_PIRQ_TABLE
-uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_GENERATE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -120,17 +120,17 @@ default CONFIG_HAVE_HARD_RESET=1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_GENERATE_PIRQ_TABLE=1
 default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default CONFIG_HAVE_MP_TABLE=1
+default CONFIG_GENERATE_MP_TABLE=1
 
 ## ACPI tables will be included
-default CONFIG_HAVE_ACPI_TABLES=1
+default CONFIG_GENERATE_ACPI_TABLES=1
 
 ##
 ## Build code to export a CMOS option table
diff --git a/src/mainboard/amd/dbm690t/mptable.c b/src/mainboard/amd/dbm690t/mptable.c
index daaf4d2daa..4c71776931 100644
--- a/src/mainboard/amd/dbm690t/mptable.c
+++ b/src/mainboard/amd/dbm690t/mptable.c
@@ -142,7 +142,7 @@ void *smp_write_config_table(void *v)
 	/* PCI interrupts are level triggered, and are
 	 * associated with a specific bus/device/function tuple.
 	 */
-#if CONFIG_HAVE_ACPI_TABLES == 0
+#if CONFIG_GENERATE_ACPI_TABLES == 0
 #define PCI_INT(bus, dev, fn, pin) \
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin))
 #else