diff options
| author | Maxim Polyakov <max.senia.poliak@gmail.com> | 2020-06-20 17:26:21 +0300 |
|---|---|---|
| committer | Nico Huber <nico.h@gmx.de> | 2020-10-11 11:12:53 +0000 |
| commit | aa99830c067036015b6ce45c01063b4482bf05b9 (patch) | |
| tree | a006f690674c98df1808a3e08e23520d359d17bb /src/ec/kontron/kempld/kempld_i2c.c | |
| parent | 0af1926353d48242f03d6c80c6b2c8f646a3c145 (diff) | |
ec/kontron/kempld: add option to configure I2C frequency
Allows to change the I2C bus frequency by overriding i2c_frequency
option from the board devicetree. Thus, the I2C controller can use
Fast-mode (Fm), with a bit rate up to 400 kbit/s and Fast-mode Plus
(Fm+), with a bit rate up to 1 Mbit/s [1].
Tested on Kontron mAL10 COMe module with T10-TNI carrierboard [2].
[1] I2C-bus specification and user manual, doc #UM10204, Rev. 6,
4 April 2014.
[2] https://review.coreboot.org/c/coreboot/+/39133
Change-Id: If0eb477af10d00eb4f17f9c01209f170b746ad3d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44476
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/ec/kontron/kempld/kempld_i2c.c')
| -rw-r--r-- | src/ec/kontron/kempld/kempld_i2c.c | 23 |
1 files changed, 17 insertions, 6 deletions
diff --git a/src/ec/kontron/kempld/kempld_i2c.c b/src/ec/kontron/kempld/kempld_i2c.c index 296cf76ddd..8abbb4b856 100644 --- a/src/ec/kontron/kempld/kempld_i2c.c +++ b/src/ec/kontron/kempld/kempld_i2c.c @@ -13,6 +13,7 @@ #include <timer.h> #include <delay.h> +#include "chip.h" #include "kempld.h" #include "kempld_internal.h" @@ -40,9 +41,6 @@ #define I2C_CMD_READ_NACK 0x29 #define I2C_CMD_IACK 0x01 -#define KEMPLD_I2C_FREQ_MAX 2700 /* 2.7 mHz */ -#define KEMPLD_I2C_FREQ_STD 100 /* 100 kHz */ - #define EIO 5 #define ENXIO 6 #define EAGAIN 11 @@ -230,7 +228,8 @@ static struct device_operations kempld_i2c_dev_ops = { void kempld_i2c_device_init(struct device *const dev) { - u16 prescale_corr; + const struct ec_kontron_kempld_config *const config = dev->chip_info; + u16 prescale_corr, frequency; long prescale; u8 ctrl; u8 stat; @@ -244,11 +243,23 @@ void kempld_i2c_device_init(struct device *const dev) ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN); kempld_write8(KEMPLD_I2C_CTRL, ctrl); + frequency = KEMPLD_I2C_FREQ_STANDARD_MODE_100KHZ; + if (config && config->i2c_frequency) { + if (config->i2c_frequency <= KEMPLD_I2C_FREQ_MAX) { + frequency = config->i2c_frequency; + } else { + printk(BIOS_NOTICE, + "kempld_i2c: %d kHz is too high!\n", + config->i2c_frequency); + } + } + printk(BIOS_INFO, "kempld_i2c: Use frequency %d\n", frequency); + const u8 spec_major = KEMPLD_SPEC_GET_MAJOR(kempld_read8(KEMPLD_SPEC)); if (spec_major == 1) - prescale = KEMPLD_CLK / (KEMPLD_I2C_FREQ_STD * 5) - 1000; + prescale = KEMPLD_CLK / (frequency * 5) - 1000; else - prescale = KEMPLD_CLK / (KEMPLD_I2C_FREQ_STD * 4) - 3000; + prescale = KEMPLD_CLK / (frequency * 4) - 3000; if (prescale < 0) prescale = 0; |