drivers/intel/usb4/retimer: Add function to correct EC port mapping

Currently coreboot interprets TCSS port number as per physical port
number while EC abstracts port number and provides indices as port
number. For example, if TCSS port 1 and 3 are enabled on the board,
coreboot will interpret port numbers as 0 and 2, but since only 2 ports
are enabled in the system EC will assign port numbers as 0 and 1.

This creates a port number mismatch while communicating between EC and
coreboot. This patch addresses issue where SoC can implement function
to map correct EC port as per port enabled in mainboard.

BUG=b:207057940
BRANCH=None
TEST=Check if code compiles successfully. Functionality will work once
function is implemented in SoC code.

Change-Id: Ia7a5e63838e6529196bd211516e4d665b084f79e
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

1 files changed, 26 insertions, 2 deletions

diff --git a/src/drivers/intel/usb4/retimer/retimer.c b/src/drivers/intel/usb4/retimer/retimer.c
index e54952598c..8a20ebe68a 100644
--- a/src/drivers/intel/usb4/retimer/retimer.c
+++ b/src/drivers/intel/usb4/retimer/retimer.c
@@ -341,6 +341,7 @@ static void usb4_retimer_fill_ssdt(const struct device *dev)
 	static char dfp[DEVICE_PATH_MAX];
 	struct acpi_pld pld;
 	uint8_t dfp_port, usb_port;
+	int ec_port = 0;
 
 	usb4_retimer_scope = acpi_device_scope(dev);
 	if (!usb4_retimer_scope || !config)
@@ -365,8 +366,14 @@ static void usb4_retimer_fill_ssdt(const struct device *dev)
 		usb_device = config->dfp[dfp_port].typec_port;
 		usb_port = usb_device->path.usb.port_id;
 
+		ec_port = retimer_get_index_for_typec(usb_port);
+		if (ec_port == -1) {
+			printk(BIOS_ERR, "%s: No relative EC port found for TC port %d\n",
+				__func__, usb_port);
+		 	continue;
+		}
 		/* DFPx */
-		snprintf(dfp, sizeof(dfp), "DFP%1d", usb_port);
+		snprintf(dfp, sizeof(dfp), "DFP%1d", ec_port);
 		acpigen_write_device(dfp);
 		/* _ADR part is for the lane adapter */
 		acpigen_write_ADR(dfp_port*2 + 1);
@@ -396,7 +403,7 @@ static void usb4_retimer_fill_ssdt(const struct device *dev)
 		/* Return (Buffer (One) { 0x0 }) */
 		acpigen_write_return_singleton_buffer(0x0);
 		acpigen_pop_len();
-		usb4_retimer_write_dsm(usb_port, INTEL_USB4_RETIMER_DSM_UUID,
+		usb4_retimer_write_dsm(ec_port, INTEL_USB4_RETIMER_DSM_UUID,
 			usb4_retimer_callbacks, ARRAY_SIZE(usb4_retimer_callbacks),
 			(void *)&config->dfp[dfp_port].power_gpio);
 		/* Default case: Return (Buffer (One) { 0x0 }) */
@@ -436,3 +443,20 @@ __weak const char *ec_retimer_fw_update_path(void)
 __weak void ec_retimer_fw_update(uint8_t data)
 {
 }
+
+/*
+ * This function will convert CPU physical port mapping to abstract
+ * EC port mapping.
+ * For example, board might have enabled TCSS port 1 and 3 as per physical
+ * port mapping. Since only 2 TCSS ports are enabled EC will index it as port 0
+ * and port 1. So there will be an issue when coreboot sends command to EC for
+ * port 3 (with coreboot index of 2). EC will produce an error due to wrong index.
+ *
+ * Note: Each SoC code using retimer driver needs to implement this function
+ * since SoC will have physical port details.
+ */
+__weak int retimer_get_index_for_typec(uint8_t typec_port)
+{
+	/* By default assume that retimer port index = Type C port */
+	return (int)typec_port;
+}