drivers/generic/ioapic: Use arch/x86/ioapic

Change-Id: Ibfaf6693288005463e45831fe100a5052e97cf2f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55185
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 2 insertions, 66 deletions

diff --git a/src/drivers/generic/ioapic/ioapic.c b/src/drivers/generic/ioapic/ioapic.c
index e33d58483e..708d9a1a7e 100644
--- a/src/drivers/generic/ioapic/ioapic.c
+++ b/src/drivers/generic/ioapic/ioapic.c
@@ -9,76 +9,12 @@
 static void ioapic_init(struct device *dev)
 {
 	struct drivers_generic_ioapic_config *config = dev->chip_info;
-	u32 bsp_lapicid = lapicid();
-	u32 low, high;
-	u32 i, ioapic_interrupts;
-	void *ioapic_base;
-	u8 ioapic_id;
 
 	if (!dev->enabled || !config)
 		return;
 
-	ioapic_base = config->base;
-	ioapic_id = config->apicid;
-
-	printk(BIOS_DEBUG, "IOAPIC: Initializing IOAPIC at %p\n",
-	       ioapic_base);
-	printk(BIOS_DEBUG, "IOAPIC: Bootstrap Processor Local APIC = 0x%02x\n",
-	       bsp_lapicid);
-
-	if (ioapic_id) {
-		printk(BIOS_DEBUG, "IOAPIC: ID = 0x%02x\n", ioapic_id);
-		/* Set IOAPIC ID if it has been specified. */
-		io_apic_write(ioapic_base, 0x00,
-			(io_apic_read(ioapic_base, 0x00) & 0xf0ffffff) |
-			(ioapic_id << 24));
-	}
-
-	/* Read the available number of interrupts. */
-	ioapic_interrupts = (io_apic_read(ioapic_base, 0x01) >> 16) & 0xff;
-	if (!ioapic_interrupts || ioapic_interrupts == 0xff)
-		ioapic_interrupts = 24;
-	printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts);
-
-	if (config->irq_on_fsb) {
-		/*
-		 * For the Pentium 4 and above APICs deliver their interrupts
-		 * on the front side bus, enable that.
-		 */
-		printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on FSB\n");
-		io_apic_write(ioapic_base, 0x03,
-		      io_apic_read(ioapic_base, 0x03) | (1 << 0));
-	} else {
-		printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on APIC serial bus\n");
-		io_apic_write(ioapic_base, 0x03, 0);
-	}
-
-	if (config->enable_virtual_wire) {
-		/* Enable Virtual Wire Mode. */
-		low = INT_ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
-		high = bsp_lapicid << (56 - 32);
-
-		io_apic_write(ioapic_base, 0x10, low);
-		io_apic_write(ioapic_base, 0x11, high);
-
-		if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
-			printk(BIOS_WARNING, "IOAPIC not responding.\n");
-			return;
-		}
-
-		printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0,
-			high, low);
-	}
-	low = INT_DISABLED;
-	high = NONE;
-
-	for (i = 1; i < ioapic_interrupts; i++) {
-		io_apic_write(ioapic_base, i * 2 + 0x10, low);
-		io_apic_write(ioapic_base, i * 2 + 0x11, high);
-
-		printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n",
-		       i, high, low);
-	}
+	setup_ioapic_helper(config->base, config->apicid, config->irq_on_fsb,
+			config->enable_virtual_wire);
 }
 
 static void ioapic_read_resources(struct device *dev)