This patch is from 2009-10-20

Convert all DEBUG_SMBUS, DEBUG_SMI, and DEBUG_RAM_SETUP custom and
local #defines into globally configurable kconfig options (and Options.lb
options for as long as newconfig still exists) which can be enabled
by the user in the "Debugging" menu.

The respective menu items only appear if a board is selected where the
chipset code actually provides such additional DEBUG output.

All three variables default to 0 / off for now.

Also, drop a small chunk of dead/useless code in the
src/northbridge/via/cn700/raminit.c file, which would otherwise break
compilation.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>

Reworked to still apply to trunk, added X86EMU_DEBUG (and make the x86emu/yabel
code only work printf instead of a redefined version of printk and 
Acked-by: Stefan Reinauer <stepan@coresystems.de>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 5 insertions, 57 deletions

diff --git a/src/devices/Kconfig b/src/devices/Kconfig
index 5e13e4e393..151492d6c8 100644
--- a/src/devices/Kconfig
+++ b/src/devices/Kconfig
@@ -74,63 +74,6 @@ config PCI_OPTION_ROM_RUN_YABEL
 
 endchoice
 
-# TODO: Describe better, and/or make a "choice" selection for this.
-config YABEL_DEBUG_FLAGS
-	prompt "Hex value for YABEL debug flags"
-	hex
-	default 0x0
-	depends on PCI_OPTION_ROM_RUN_YABEL
-	help
-	  CONFIG_YABEL_DEBUG_FLAGS is a binary switch that allows you
-	  to select the following items to debug. 1=on 0=off. After you
-	  decide what you want to debug create the binary value, convert to
-	  hex and set the option.
-
-	  Example for "debug all":
-	    CONFIG_YABEL_DEBUG_FLAGS = 0x31FF
-
-	  |-DEBUG_JMP - Print info about JMP and RETF opcodes from x86emu
-	  ||-DEBUG_TRACE_X86EMU - Print _all_ opcodes that are executed by
-	  ||                      x86emu (WARNING: this will produce a LOT
-	  ||                      of output)
-	  |||-Currently unused
-	  ||||-Currently unused
-	  |||||-Currently unused
-	  ||||||-DEBUG_PNP - Print Plug And Play accesses made by option ROM
-	  |||||||-DEBUG_DISK - Print Disk I/O related messages, currently unused
-	  ||||||||-DEBUG_PMM - Print messages related to POST Memory
-	  ||||||||             Manager (PMM)
-	  |||||||||-DEBUG_VBE - Print messages related to VESA BIOS Extension
-	  |||||||||             (VBE) functions
-	  ||||||||||-DEBUG_PRINT_INT10 - Let INT10 (i.e. character output)
-	  ||||||||||                     calls print messages to debug output
-	  |||||||||||-DEBUG_INTR - Print messages related to interrupt handling
-	  ||||||||||||-DEBUG_CHECK_VMEM_ACCESS - Print messages related to
-	  ||||||||||||                           accesses to certain areas of
-	  ||||||||||||                           the virtual memory (e.g. BDA
-	  ||||||||||||                           (BIOS Data Area) or interrupt
-	  ||||||||||||                           vectors)
-	  |||||||||||||-DEBUG_MEM - Print memory accesses made by option ROM
-	  |||||||||||||             (NOTE: this also includes accesses to
-	  |||||||||||||             fetch instructions)
-	  ||||||||||||||-DEBUG_IO - Print I/O accesses made by option ROM
-	  11000111111111 - Maximum binary value, i.e. "debug all"
-	                   (WARNING: This could run for hours)
-
-	  DEBUG_IO			0x0001
-	  DEBUG_MEM			0x0002
-	  DEBUG_CHECK_VMEM_ACCESS	0x0004
-	  DEBUG_INTR			0x0008
-	  DEBUG_PRINT_INT10		0x0010
-	  DEBUG_VBE			0x0020
-	  DEBUG_PMM			0x0040
-	  DEBUG_DISK			0x0080
-	  DEBUG_PNP			0x0100
-	  DEBUG_TRACE_X86EMU		0x1000
-	  DEBUG_JMP			0x2000
-
-	  See debug.h for values. 0 is no debug output, 0x31ff is _verbose_.
-
 config YABEL_PCI_ACCESS_OTHER_DEVICES
 	prompt "Allow option ROMs to access other devices"
 	bool
@@ -150,6 +93,11 @@ config YABEL_VIRTMEM_LOCATION
 	  YABEL requires 1MB memory for its CPU emulation. This memory is
 	  normally located at 16MB.
 
+config YABEL_VIRTMEM_LOCATION
+	hex
+	depends on PCI_OPTION_ROM_RUN_YABEL && !EXPERT
+	default 0x1000000
+
 config YABEL_DIRECTHW
 	prompt "Direct hardware access"
 	bool