summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
authorLi-Ta Lo <ollie@lanl.gov>2006-04-27 18:40:15 +0000
committerLi-Ta Lo <ollie@lanl.gov>2006-04-27 18:40:15 +0000
commitc1a4b2b0e56d5c12622e5c0841cabf599311c896 (patch)
tree7eab97235845760adf42b721ed4bf3b4cfc60a5d /src/cpu
parentb947b147348ee31285637e1c4f08c6e52e512f4d (diff)
code cleanup, comments added
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/amd/model_gx2/cpureginit.c205
-rw-r--r--src/cpu/amd/model_gx2/model_gx2_init.c5
-rw-r--r--src/cpu/amd/model_gx2/syspreinit.c15
3 files changed, 101 insertions, 124 deletions
diff --git a/src/cpu/amd/model_gx2/cpureginit.c b/src/cpu/amd/model_gx2/cpureginit.c
index f2802b67ca..a1f55fe762 100644
--- a/src/cpu/amd/model_gx2/cpureginit.c
+++ b/src/cpu/amd/model_gx2/cpureginit.c
@@ -9,7 +9,8 @@
/* **/
/* ***************************************************************************/
static void
-BIST(void){
+BIST(void)
+{
int msrnum;
msr_t msr;
@@ -24,8 +25,8 @@ BIST(void){
msrnum = CPU_DM_BIST;
wrmsr(msrnum, msr);
- outb(POST_CPU_DM_BIST_FAILURE , 0x80); /* 0x29*/
- msr = rdmsr(msrnum); /* read back for pass fail*/
+ outb(POST_CPU_DM_BIST_FAILURE, 0x80); /* 0x29*/
+ msr = rdmsr(msrnum); /* read back for pass fail*/
msr.lo &= 0x0F3FF0000;
if (msr.lo != 0xfeff0000)
goto BISTFail;
@@ -41,108 +42,115 @@ BIST(void){
msrnum = CPU_FP_UROM_BIST;
wrmsr(msrnum, msr);
- outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/
- inb(0x80); /* IO delay*/
- msr = rdmsr(msrnum); /* read back for pass fail*/
+ outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/
+ inb(0x80); /* IO delay*/
+ msr = rdmsr(msrnum); /* read back for pass fail*/
while ((msr.lo&0x884) != 0x884)
- msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/
+ msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/
if ((msr.lo&0x642) != 0x642)
goto BISTFail;
-
- msr.lo = msr.hi = 0; /* clear FPU BIST bits*/
+ msr.lo = msr.hi = 0; /* clear FPU BIST bits*/
msrnum = CPU_FP_UROM_BIST;
wrmsr(msrnum, msr);
-
/* BTB*/
msr.lo = 0x000000303;
msr.hi = 0x000000000;
msrnum = CPU_PF_BTBRMA_BIST;
wrmsr(msrnum, msr);
- outb(POST_CPU_BTB_BIST_FAILURE , 0x80); /* 0x8A*/
- msr = rdmsr(msrnum); /* read back for pass fail*/
+ outb(POST_CPU_BTB_BIST_FAILURE, 0x80); /* 0x8A*/
+ msr = rdmsr(msrnum); /* read back for pass fail*/
if ((msr.lo & 0x3030) != 0x3030)
goto BISTFail;
return;
-
BISTFail:
print_err("BIST failed!\n");
while(1);
}
+
+void BTM_enable(void)
+{
+ int msrnum;
+ msr_t msr;
+ /* Set Diagnostic Mode */
+ msrnum = CPU_GLD_MSR_DIAG;
+ msr.hi = 0;
+ msr.lo = DIAG_SEL1_SET | DIAG_SET0_SET;
+ wrmsr(msrnum, msr);
+
+ /* Set up GLCP to grab BTM data.*/
+ msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR*/
+ msr.hi = 0x0;
+ msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out,*/
+ wrmsr(msrnum, msr); /* exchange it to anything else to prevent this*/
+
+ /* ;Turn off debug clock*/
+ msrnum = 0x04C000016; /* DBG_CLK_CTL*/
+ msr.lo = 0x00; /* No clock*/
+ msr.hi = 0x00;
+ wrmsr(msrnum, msr);
+
+ /* ;Set debug clock to CPU*/
+ msrnum = 0x04C000016; /* DBG_CLK_CTL*/
+ msr.lo = 0x01; /* CPU CLOCK*/
+ msr.hi = 0x00;
+ wrmsr(msrnum, msr);
+
+ /* ;Set fifo ctl to BTM bits wide*/
+ msrnum = 0x04C00005E; /* FIFO_CTL*/
+ msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit,
+ * 01= 32 bit, 00 = 16bit),
+ * Bit [23:21] are position (100 = CPU downto0)*/
+ wrmsr(msrnum, msr); /* */
+ /* Bit [19] sets it up in slow data mode.*/
+
+ /* ;enable fifo loading - BTM sizing will constrain*/
+ /* ; only valid BTM packets to load - this action should always be on*/
+ msrnum = 0x04C00006F; /* GLCP ACTION7 - load fifo*/
+ msr.lo = 0x00000F000; /* Any nibble all 1's will always trigger*/
+ msr.hi = 0x000000000; /* */
+ wrmsr(msrnum, msr);
+
+ /* ;start storing diag data in the fifo*/
+ msrnum = 0x04C00005F; /* DIAG CTL*/
+ msr.lo = 0x080000000; /* enable actions*/
+ msr.hi = 0x000000000;
+ wrmsr(msrnum, msr);
+
+ /* Set up delay on data lines, so that the hold time*/
+ /* is 1 ns.*/
+ msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS*/
+ msr.lo = 0x082b5ad68;
+ msr.hi = 0x080ad6b57; /* RGB delay = 0x07*/
+ wrmsr(msrnum, msr);
+
+ /* Set up DF to output diag information on DF pins.*/
+ msrnum = DF_GLD_MSR_MASTER_CONF;
+ msr.lo = 0x0220;
+ msr.hi = 0;
+ wrmsr(msrnum, msr);
+
+ msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR*/
+ msr.hi = 0x0;
+ msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out,*/
+ wrmsr(msrnum, msr);
+ /* end of code for BTM */
+}
+
/* ***************************************************************************/
/* * cpuRegInit*/
/* ***************************************************************************/
void
-cpuRegInit (void){
+cpuRegInit (void)
+{
int msrnum;
msr_t msr;
/* Turn on BTM for early debug based on setup. */
/*if (getnvram( TOKEN_BTM_DIAG_MODE) & 3) {*/
{
- /* Set Diagnostic Mode */
- msrnum = CPU_GLD_MSR_DIAG;
- msr.hi = 0;
- msr.lo = DIAG_SEL1_SET | DIAG_SET0_SET;
- wrmsr(msrnum, msr);
-
- /* Set up GLCP to grab BTM data.*/
- msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR*/
- msr.hi = 0x0;
- msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out,*/
- wrmsr(msrnum, msr); /* exchange it to anything else to prevent this*/
-
- /* ;Turn off debug clock*/
- msrnum = 0x04C000016; /* DBG_CLK_CTL*/
- msr.lo = 0x00; /* No clock*/
- msr.hi = 0x00;
- wrmsr(msrnum, msr);
-
- /* ;Set debug clock to CPU*/
- msrnum = 0x04C000016; /* DBG_CLK_CTL*/
- msr.lo = 0x01; /* CPU CLOCK*/
- msr.hi = 0x00;
- wrmsr(msrnum, msr);
-
- /* ;Set fifo ctl to BTM bits wide*/
- msrnum = 0x04C00005E; /* FIFO_CTL*/
- msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit, 01= 32 bit, 00 = 16bit)*/
- wrmsr(msrnum, msr); /* Bit [23:21] are position (100 = CPU downto0)*/
- /* Bit [19] sets it up in slow data mode.*/
-
- /* ;enable fifo loading - BTM sizing will constrain*/
- /* ; only valid BTM packets to load - this action should always be on*/
-
- msrnum = 0x04C00006F; /* GLCP ACTION7 - load fifo*/
- msr.lo = 0x00000F000; /* Any nibble all 1's will always trigger*/
- msr.hi = 0x000000000; /* */
- wrmsr(msrnum, msr);
-
- /* ;start storing diag data in the fifo*/
- msrnum = 0x04C00005F; /* DIAG CTL*/
- msr.lo = 0x080000000; /* enable actions*/
- msr.hi = 0x000000000;
- wrmsr(msrnum, msr);
-
- /* Set up delay on data lines, so that the hold time*/
- /* is 1 ns.*/
- msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS*/
- msr.lo = 0x082b5ad68;
- msr.hi = 0x080ad6b57; /* RGB delay = 0x07*/
- wrmsr(msrnum, msr);
-
- /* Set up DF to output diag information on DF pins.*/
- msrnum = DF_GLD_MSR_MASTER_CONF;
- msr.lo = 0x0220;
- msr.hi = 0;
- wrmsr(msrnum, msr);
-
- msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR*/
- msr.hi = 0x0;
- msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out,*/
- wrmsr(msrnum, msr);
- /* end of code for BTM */
+ BTM_enable();
}
/* Enable Suspend on Halt*/
@@ -164,49 +172,32 @@ cpuRegInit (void){
msr.lo = 0x00000603C;
wrmsr(msrnum, msr);
-
-/* Only do this if we are building for 5535*/
-/* */
-/* FooGlue Setup*/
-/* */
-#if 1
- /* Enable CIS mode B in FooGlue*/
+ /* Enable CIS mode C */
msrnum = MSR_FG + 0x10;
msr = rdmsr(msrnum);
msr.lo &= ~3;
- msr.lo |= 2; /* ModeB*/
+ msr.lo |= 2;
wrmsr(msrnum, msr);
-#endif
-/* */
-/* Disable DOT PLL. Graphics init will enable it if needed.*/
-/* */
+ /* Disable DOT PLL. Graphics init will enable it if needed.*/
msrnum = GLCP_DOTPLL;
msr = rdmsr(msrnum);
msr.lo |= DOTPPL_LOWER_PD_SET;
wrmsr(msrnum, msr);
-/* */
-/* Enable RSDC*/
-/* */
+ /* Enable RSDC and other SMM instructions */
msrnum = 0x1301 ;
msr = rdmsr(msrnum);
msr.lo |= 0x08;
wrmsr(msrnum, msr);
-
-/* */
-/* BIST*/
-/* */
+ /* BIST*/
/*if (getnvram( TOKEN_BIST_ENABLE) & == TVALUE_DISABLE) {*/
{
-// BIST();
+ //BIST();
}
-
-/* */
-/* Enable BTB*/
-/* */
+ /* Enable BTB*/
/* I hate to put this check here but it doesn't really work in cpubug.asm*/
msrnum = MSR_GLCP+0x17;
msr = rdmsr(msrnum);
@@ -217,9 +208,7 @@ cpuRegInit (void){
wrmsr(msrnum, msr);
}
-/* */
-/* FPU impercise exceptions bit*/
-/* */
+ /* FPU impercise exceptions bit*/
/*if (getnvram( TOKEN_FPU_IE_ENABLE) != TVALUE_DISABLE) {*/
{
msrnum = CPU_FPU_MSR_MODE;
@@ -228,9 +217,7 @@ cpuRegInit (void){
wrmsr(msrnum, msr);
}
-/* */
-/* Cache Overides*/
-/* */
+ /* Cache Overides*/
/* Allow NVRam to override DM Setup*/
/*if (getnvram( TOKEN_CACHE_DM_MODE) != 1) {*/
{
@@ -250,9 +237,6 @@ cpuRegInit (void){
}
}
-
-
-
/* ***************************************************************************/
/* **/
/* * MTestPinCheckBX*/
@@ -262,7 +246,8 @@ cpuRegInit (void){
/* **/
/* ***************************************************************************/
static void
-MTestPinCheckBX (void){
+MTestPinCheckBX (void)
+{
int msrnum;
msr_t msr;
diff --git a/src/cpu/amd/model_gx2/model_gx2_init.c b/src/cpu/amd/model_gx2/model_gx2_init.c
index c6ad683ff8..d534f530c7 100644
--- a/src/cpu/amd/model_gx2/model_gx2_init.c
+++ b/src/cpu/amd/model_gx2/model_gx2_init.c
@@ -12,6 +12,7 @@ static void vsm_end_post_smi(void)
__asm__ volatile (
"push %ax\n"
"mov $0x5000, %ax\n"
+ /* smint */
".byte 0x0f, 0x38\n"
"pop %ax\n"
);
@@ -24,9 +25,7 @@ static void model_gx2_init(device_t dev)
/* Turn on caching if we haven't already */
x86_enable_cache();
- /* Enable the local cpu apics */
- //setup_lapic();
-
+ /* send SYS_END_OF_POST to VSM */
vsm_end_post_smi();
printk_debug("model_gx2_init DONE\n");
diff --git a/src/cpu/amd/model_gx2/syspreinit.c b/src/cpu/amd/model_gx2/syspreinit.c
index e3ad95235d..d411510866 100644
--- a/src/cpu/amd/model_gx2/syspreinit.c
+++ b/src/cpu/amd/model_gx2/syspreinit.c
@@ -1,20 +1,13 @@
-/* ***************************************************************************/
-/* **/
-/* * StartTimer1*/
-/* **/
-/* * Entry: none*/
-/* * Exit: Starts Timer 1 for port 61 use*/
-/* * Destroys: Al,*/
-/* **/
-/* ***************************************************************************/
void
-StartTimer1(void){
+StartTimer1(void)
+{
outb(0x56, 0x43);
outb(0x12, 0x41);
}
void
-SystemPreInit(void){
+SystemPreInit(void)
+{
/* they want a jump ... */
__asm__("jmp .+2\ninvd\njmp.+2\n");