src/cpu: Capitalize CPU, APIC and IOAPIC typo fix

Change-Id: I82e0736dc6b44cfcc57cdfdc786c85c4b6882260
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16276
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker

8 files changed, 18 insertions, 18 deletions

diff --git a/src/cpu/x86/16bit/entry16.inc b/src/cpu/x86/16bit/entry16.inc
index b4db83400d..cf366e0af6 100644
--- a/src/cpu/x86/16bit/entry16.inc
+++ b/src/cpu/x86/16bit/entry16.inc
@@ -79,7 +79,7 @@ _start16bit:
 	 *
 	 * The criteria for relocation have been relaxed to their
 	 * utmost, so that we can use the same code for both
-	 * our initial entry point and startup of the second cpu.
+	 * our initial entry point and startup of the second CPU.
 	 * The code assumes when executing at _start16bit that:
 	 * (((cs & 0xfff) == 0) and (ip == _start16bit & 0xffff))
 	 * or
diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig
index c4507bc911..3e56d721f5 100644
--- a/src/cpu/x86/Kconfig
+++ b/src/cpu/x86/Kconfig
@@ -25,7 +25,7 @@ config LAPIC_MONOTONIC_TIMER
 	depends on UDELAY_LAPIC
 	select HAVE_MONOTONIC_TIMER
 	help
-	  Expose monotonic time using the local apic.
+	  Expose monotonic time using the local APIC.
 
 config UDELAY_LAPIC_FIXED_FSB
 	int
diff --git a/src/cpu/x86/lapic/apic_timer.c b/src/cpu/x86/lapic/apic_timer.c
index b16521a56d..41edde913f 100644
--- a/src/cpu/x86/lapic/apic_timer.c
+++ b/src/cpu/x86/lapic/apic_timer.c
@@ -83,7 +83,7 @@ static inline u32 get_timer_fsb(void)
 
 void init_timer(void)
 {
-	/* Set the apic timer to no interrupts and periodic mode */
+	/* Set the APIC timer to no interrupts and periodic mode */
 	lapic_write(LAPIC_LVTT, (LAPIC_LVT_TIMER_PERIODIC | LAPIC_LVT_MASKED));
 
 	/* Set the divider to 1, no divider */
diff --git a/src/cpu/x86/lapic/lapic.c b/src/cpu/x86/lapic/lapic.c
index 83a45b013c..f6cbe17992 100644
--- a/src/cpu/x86/lapic/lapic.c
+++ b/src/cpu/x86/lapic/lapic.c
@@ -17,9 +17,9 @@ void setup_lapic(void)
 	/* Only Pentium Pro and later have those MSR stuff */
 	msr_t msr;
 
-	printk(BIOS_INFO, "Setting up local apic...");
+	printk(BIOS_INFO, "Setting up local APIC...");
 
-	/* Enable the local apic */
+	/* Enable the local APIC */
 	msr = rdmsr(LAPIC_BASE_MSR);
 	msr.lo |= LAPIC_BASE_MSR_ENABLE;
 	msr.lo &= ~LAPIC_BASE_MSR_ADDR_MASK;
@@ -32,7 +32,7 @@ void setup_lapic(void)
 	lapic_write_around(LAPIC_TASKPRI,
 		lapic_read_around(LAPIC_TASKPRI) & ~LAPIC_TPRI_MASK);
 
-	/* Put the local apic in virtual wire mode */
+	/* Put the local APIC in virtual wire mode */
 	lapic_write_around(LAPIC_SPIV,
 		(lapic_read_around(LAPIC_SPIV) & ~(LAPIC_VECTOR_MASK))
 		| LAPIC_SPIV_ENABLE);
@@ -61,7 +61,7 @@ void setup_lapic(void)
 	/* Only Pentium Pro and later have those MSR stuff */
 	msr_t msr;
 
-	printk(BIOS_INFO, "Disabling local apic...");
+	printk(BIOS_INFO, "Disabling local APIC...");
 
 	msr = rdmsr(LAPIC_BASE_MSR);
 	msr.lo &= ~LAPIC_BASE_MSR_ENABLE;
diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c
index aaeceefe08..792ae7a8eb 100644
--- a/src/cpu/x86/lapic/lapic_cpu_init.c
+++ b/src/cpu/x86/lapic/lapic_cpu_init.c
@@ -165,7 +165,7 @@ static int lapic_start_cpu(unsigned long apicid)
 		send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
 	} while (send_status && (timeout++ < 1000));
 	if (timeout >= 1000) {
-		printk(BIOS_ERR, "CPU %ld: Second apic write timed out. "
+		printk(BIOS_ERR, "CPU %ld: Second APIC write timed out. "
 			"Disabling\n", apicid);
 		// too bad.
 		return 0;
@@ -546,7 +546,7 @@ void initialize_cpus(struct bus *cpu_bus)
 	info = cpu_info();
 
 #if NEED_LAPIC == 1
-	/* Ensure the local apic is enabled */
+	/* Ensure the local APIC is enabled */
 	enable_lapic();
 
 	/* Get the device path of the boot CPU */
diff --git a/src/cpu/x86/mp_init.c b/src/cpu/x86/mp_init.c
index ff32015b58..baa3599a94 100644
--- a/src/cpu/x86/mp_init.c
+++ b/src/cpu/x86/mp_init.c
@@ -81,7 +81,7 @@ struct mp_params {
 	int num_cpus; /* Total cpus include BSP */
 	int parallel_microcode_load;
 	const void *microcode_pointer;
-	/* adjust_apic_id() is called for every potential apic id in the
+	/* adjust_apic_id() is called for every potential APIC id in the
 	 * system up from 0 to CONFIG_MAX_CPUS. Return adjusted apic_id. */
 	int (*adjust_apic_id)(int index, int apic_id);
 	/* Flight plan  for APs and BSP. */
@@ -134,7 +134,7 @@ struct cpu_map {
 	int apic_id;
 };
 
-/* Keep track of apic and device structure for each cpu. */
+/* Keep track of APIC and device structure for each CPU. */
 static struct cpu_map cpus[CONFIG_MAX_CPUS];
 
 static inline void barrier_wait(atomic_t *b)
@@ -192,7 +192,7 @@ static void asmlinkage ap_init(unsigned int cpu)
 	struct cpu_info *info;
 	int apic_id;
 
-	/* Ensure the local apic is enabled */
+	/* Ensure the local APIC is enabled */
 	enable_lapic();
 
 	info = cpu_info();
@@ -546,14 +546,14 @@ static void init_bsp(struct bus *cpu_bus)
 	fill_processor_name(processor_name);
 	printk(BIOS_INFO, "CPU: %s.\n", processor_name);
 
-	/* Ensure the local apic is enabled */
+	/* Ensure the local APIC is enabled */
 	enable_lapic();
 
-	/* Set the device path of the boot cpu. */
+	/* Set the device path of the boot CPU. */
 	cpu_path.type = DEVICE_PATH_APIC;
 	cpu_path.apic.apic_id = lapicid();
 
-	/* Find the device structure for the boot cpu. */
+	/* Find the device structure for the boot CPU. */
 	info = cpu_info();
 	info->cpu = alloc_find_dev(cpu_bus, &cpu_path);
 
@@ -641,7 +641,7 @@ static void mp_initialize_cpu(void)
 	cpu_initialize(info->index);
 }
 
-/* Returns apic id for coreboot CPU number or < 0 on failure. */
+/* Returns APIC id for coreboot CPU number or < 0 on failure. */
 static int mp_get_apic_id(int cpu_slot)
 {
 	if (cpu_slot >= CONFIG_MAX_CPUS || cpu_slot < 0)
diff --git a/src/cpu/x86/smm/smm_module_loader.c b/src/cpu/x86/smm/smm_module_loader.c
index 09ddb037f8..139bce13ab 100644
--- a/src/cpu/x86/smm/smm_module_loader.c
+++ b/src/cpu/x86/smm/smm_module_loader.c
@@ -41,7 +41,7 @@ struct smm_stub_params {
 
 /*
  * The stub is the entry point that sets up protected mode and stacks for each
- * cpu. It then calls into the SMM handler module. It is encoded as an rmodule.
+ * CPU. It then calls into the SMM handler module. It is encoded as an rmodule.
  */
 extern unsigned char _binary_smmstub_start[];
 
diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S
index 2502df8a56..2fe01565c4 100644
--- a/src/cpu/x86/smm/smmrelocate.S
+++ b/src/cpu/x86/smm/smmrelocate.S
@@ -125,7 +125,7 @@ smm_relocate:
 	shr  $24, %ecx
 
 	/* calculate offset by multiplying the
-	 * apic ID by 1024 (0x400)
+	 * APIC ID by 1024 (0x400)
 	 */
 	movl %ecx, %edx
 	shl $10, %edx