x86: Add .data section support for pre-memory stages

x86 pre-memory stages do not support the `.data` section and as a
result developers are required to include runtime initialization code
instead of relying on C global variable definition.

To illustrate the impact of this lack of `.data` section support, here
are two limitations I personally ran into:

1. The inclusion of libgfxinit in romstage for Raptor Lake has
   required some changes in libgfxinit to ensure data is initialized at
   runtime. In addition, we had to manually map some `.data` symbols in
   the `_bss` region.

2. CBFS cache is currently not supported in pre-memory stages and
   enabling it would require to add an initialization function and
   find a generic spot to call it.

Other platforms do not have that limitation. Hence, resolving it would
help to align code and reduce compilation based restriction (cf. the
use of `ENV_HAS_DATA_SECTION` compilation flag in various places of
coreboot code).

We identified three cases to consider:

1. eXecute-In-Place pre-memory stages
   - code is in SPINOR
   - data is also stored in SPINOR but must be linked in Cache-As-RAM
     and copied there at runtime

2. `bootblock` stage is a bit different as it uses Cache-As-Ram but
   the memory mapping and its entry code different

3. pre-memory stages loaded in and executed from
   Cache-As-RAM (cf. `CONFIG_NO_XIP_EARLY_STAGES`).

eXecute-In-Place pre-memory stages (#1) require the creation of a new
ELF segment as the code segment Virtual Memory Address and Load Memory
Address are identical but the data needs to be linked in
cache-As-RAM (VMA) but to be stored right after the code (LMA).

Here is the output `readelf --segments` on a `romstage.debug` ELF
binary.

    Program Headers:
      Type    Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
      LOAD    0x000080 0x02000000 0x02000000 0x21960 0x21960 R E 0x20
      LOAD    0x0219e0 0xfefb1640 0x02021960 0x00018 0x00018 RW  0x4

     Section to Segment mapping:
      Segment Sections...
       00     .text
       01     .data

Segment 0 `VirtAddr` and `PhysAddr` are at the same address while they
are totally different for the Segment 1 holding the `.data`
section. Since we need the data section `VirtAddr` to be in the
Cache-As-Ram and its `PhysAddr` right after the `.text` section, the
use of a new segment is mandatory.

`bootblock` (#2) also uses this new segment to store the data right
after the code and load it to Cache-As-RAM at runtime. However, the
code involved is different.

Not eXecute-In-Place pre-memory stages (#3) do not really need any
special work other than enabling a data section as the code and data
VMA / LMA translation vector is the same.

TEST=#1 and #2 verified on rex and qemu 32 and 64 bits:
     - The `bootblock.debug`, `romstage.debug` and
       `verstage.debug` all have data stored at the end of the `.text`
       section and code to copy the data content to the Cache-As-RAM.
     - The CBFS stages included in the final image has not improperly
       relocated any of the `.data` section symbol.
     - Test purposes global data symbols we added in bootblock,
       romstage and verstage are properly accessible at runtime
     #3: for "Intel Apollolake DDR3 RVP1" board, we verified that the
     generated romstage ELF includes a .data section similarly to a
     regular memory enabled stage.

Change-Id: I030407fcc72776e59def476daa5b86ad0495debe
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

1 files changed, 38 insertions, 0 deletions

diff --git a/src/cpu/x86/copy_data_section.inc b/src/cpu/x86/copy_data_section.inc
new file mode 100644
index 0000000000..dccb8d3975
--- /dev/null
+++ b/src/cpu/x86/copy_data_section.inc
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#if ENV_SEPARATE_DATA_AND_BSS
+
+/*
+ * Copy .data section content to Cache-As-Ram.
+ * This code can be included from 32 bits or 64 bits code. It also preserves
+ * registers.
+ */
+copy_data_section:
+#if ENV_X86_64
+	push	%rcx
+	push	%rdi
+	push	%rsi
+#else
+	pushl	%ecx
+	pushl	%edi
+	pushl	%esi
+#endif
+
+	movl	$(_edata), %ecx
+	movl	$(_data), %edi
+	sub	%edi, %ecx
+	movl	$(_data_load),%esi
+	shrl	$2, %ecx
+	rep	movsl
+
+#if ENV_X86_64
+	pop	%rsi
+	pop	%rdi
+	pop	%rcx
+#else
+	popl	%esi
+	popl	%edi
+	popl	%ecx
+#endif
+
+#endif	/* ENV_SEPARATE_DATA_AND_BSS */