summaryrefslogtreecommitdiff
path: root/src/cpu/amd
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2007-10-26 14:57:46 +0000
committerRonald G. Minnich <rminnich@gmail.com>2007-10-26 14:57:46 +0000
commit65bc460e01c22cf0f347903735d0860756dc0777 (patch)
tree1f27bee56e7ac3fbfa522623d36d6c11c218f1eb /src/cpu/amd
parent3d02e1e0d813eb4d986d26b5f4e98e5c12d46ea6 (diff)
This code gets us to a working linux boot on the alix1c. I have not tested
Ethernet yet. The fixes are a board-specific fake spd_read_byte, cleaning up comments, and just in general customizing for the 1c. The lxraminit change fixes a bug (&& used instead of ||), adds some debug prints which were VERY useful debugging the alix1c, changes fatal error messages from print_debug to print_emerg, and adds two functions: banner, which just prints out a string with a banner, and hcf, which print an emergency message and then pushes null bytes into the uart forever, just to make sure that no bytes get lost for any reason. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2899 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd')
-rw-r--r--src/cpu/amd/model_lx/cpureginit.c19
1 files changed, 18 insertions, 1 deletions
diff --git a/src/cpu/amd/model_lx/cpureginit.c b/src/cpu/amd/model_lx/cpureginit.c
index ef5a8b9d94..930762704e 100644
--- a/src/cpu/amd/model_lx/cpureginit.c
+++ b/src/cpu/amd/model_lx/cpureginit.c
@@ -205,7 +205,13 @@ void SetDelayControl(void)
}
}
}
+ print_debug("Try to write GLCP_DELAY_CONTROLS: hi ");
+ print_debug_hex32(msr.hi);
+ print_debug(" and lo ");
+ print_debug_hex32(msr.lo);
+ print_debug("\r\n");
wrmsr(GLCP_DELAY_CONTROLS, msr);
+ print_debug("SetDelayControl done\r\n");
return;
}
@@ -219,6 +225,7 @@ void cpuRegInit(void)
/* Castle 2.0 BTM periodic sync period. */
/* [40:37] 1 sync record per 256 bytes */
+ print_debug("Castle 2.0 BTM periodic sync period.\r\n");
msrnum = CPU_PF_CONF;
msr = rdmsr(msrnum);
msr.hi |= (0x8 << 5);
@@ -228,6 +235,7 @@ void cpuRegInit(void)
* LX performance setting.
* Enable Quack for fewer re-RAS on the MC
*/
+ print_debug("Enable Quack for fewer re-RAS on the MC\r\n");
msrnum = GLIU0_ARB;
msr = rdmsr(msrnum);
msr.hi &= ~ARB_UPPER_DACK_EN_SET;
@@ -240,22 +248,28 @@ void cpuRegInit(void)
msr.hi |= ARB_UPPER_QUACK_EN_SET;
wrmsr(msrnum, msr);
- /* GLIU port active enable, limit south pole masters (AES and PCI) to one outstanding transaction. */
+ /* GLIU port active enable, limit south pole masters
+ * (AES and PCI) to one outstanding transaction.
+ */
+ print_debug(" GLIU port active enable\r\n");
msrnum = GLIU1_PORT_ACTIVE;
msr = rdmsr(msrnum);
msr.lo &= ~0x880;
wrmsr(msrnum, msr);
/* Set the Delay Control in GLCP */
+ print_debug("Set the Delay Control in GLCP\r\n");
SetDelayControl();
/* Enable RSDC */
+ print_debug("Enable RSDC\r\n");
msrnum = CPU_AC_SMM_CTL;
msr = rdmsr(msrnum);
msr.lo |= SMM_INST_EN_SET;
wrmsr(msrnum, msr);
/* FPU imprecise exceptions bit */
+ print_debug("FPU imprecise exceptions bit\r\n");
msrnum = CPU_FPU_MSR_MODE;
msr = rdmsr(msrnum);
msr.lo |= FPU_IE_SET;
@@ -263,12 +277,14 @@ void cpuRegInit(void)
/* Power Savers (Do after BIST) */
/* Enable Suspend on HLT & PAUSE instructions */
+ print_debug("Enable Suspend on HLT & PAUSE instructions\r\n");
msrnum = CPU_XC_CONFIG;
msr = rdmsr(msrnum);
msr.lo |= XC_CONFIG_SUSP_ON_HLT | XC_CONFIG_SUSP_ON_PAUSE;
wrmsr(msrnum, msr);
/* Enable SUSP and allow TSC to run in Suspend (keep speed detection happy) */
+ print_debug("Enable SUSP and allow TSC to run in Suspend\r\n");
msrnum = CPU_BC_CONF_0;
msr = rdmsr(msrnum);
msr.lo |= TSC_SUSP_SET | SUSP_EN_SET;
@@ -286,6 +302,7 @@ void cpuRegInit(void)
#endif
/* Setup throttling delays to proper mode if it is ever enabled. */
+ print_debug("Setup throttling delays to proper mode\r\n");
msrnum = GLCP_TH_OD;
msr.hi = 0;
msr.lo = 0x00000603C;