cpu: Fix spelling

Change-Id: I69c46648de0689e9bed84c7726906024ad65e769
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/3729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

13 files changed, 25 insertions, 25 deletions

diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c
index 68e7c09ad3..18c278e41a 100644
--- a/src/cpu/amd/car/post_cache_as_ram.c
+++ b/src/cpu/amd/car/post_cache_as_ram.c
@@ -88,7 +88,7 @@ static void post_cache_as_ram(void)
 #endif
 #if 1
 	{
-	/* Check value of esp to verify if we have enough rom for stack in Cache as RAM */
+	/* Check value of esp to verify if we have enough room for stack in Cache as RAM */
 	unsigned v_esp;
 	__asm__ volatile (
 		"movl   %%esp, %0\n\t"
@@ -123,7 +123,7 @@ static void post_cache_as_ram(void)
 		/* set new esp */ /* before CONFIG_RAMBASE */
 		"subl   %0, %%esp\n\t"
 		::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- (CONFIG_RAMTOP) )
-		/* discard all registers (eax is used for %0), so gcc redo everything
+		/* discard all registers (eax is used for %0), so gcc redoes everything
 		   after the stack is moved */
 		: "cc", "memory", "%ebx", "%ecx", "%edx", "%esi", "%edi", "%ebp"
 	);
diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c
index 13b9e378f3..b3df0a36e7 100644
--- a/src/cpu/amd/dualcore/amd_sibling.c
+++ b/src/cpu/amd/dualcore/amd_sibling.c
@@ -91,10 +91,10 @@ unsigned get_apicid_base(unsigned ioapic_num)
 	}
 #endif
 
-	//contruct apicid_base
+	//Construct apicid_base
 
 	if((!disable_siblings) && (siblings>0) ) {
-		/* for 8 way dual core, we will used up apicid 16:16, actualy 16 is not allowed by current kernel
+		/* for 8 way dual core, we will used up apicid 16:16, actually 16 is not allowed by current kernel
 		and the kernel will try to get one that is small than 16 to make io apic work.
 		I don't know when the kernel can support 256 apic id. (APIC_EXT_ID is enabled) */
 
diff --git a/src/cpu/amd/geode_gx2/cpubug.c b/src/cpu/amd/geode_gx2/cpubug.c
index 54d7e0e8d2..eddc92408e 100644
--- a/src/cpu/amd/geode_gx2/cpubug.c
+++ b/src/cpu/amd/geode_gx2/cpubug.c
@@ -163,7 +163,7 @@ static void eng2900(void)
 		 * clocks when CPU is snooped.  Because setting XSTATE to 0
 		 * overrides any other XSTATE action, the code will always
 		 * stall for 4 GeodeLink clocks after a snoop request goes
-		 * away even if it occured a clock or two later than a
+		 * away even if it occurred a clock or two later than a
 		 * different snoop; the stall signal will never 'glitch high'
 		 * for only one or two CPU clocks with this code.
 		 */
@@ -201,7 +201,7 @@ static void eng2900(void)
 		msr.lo = 0x30000;
 		wrmsr(MSR_GLCP + 0x0073, msr);
 
-		/* Writing action number 5: STALL_CPU_PIPE when exitting idle
+		/* Writing action number 5: STALL_CPU_PIPE when exiting idle
 		   state or not in idle state */
 		msr.hi = 0;
 		msr.lo = 0x00430000;
@@ -293,7 +293,7 @@ static void bug118339(void)
  *
  * PBZ 3659:
  * The MC reordered transactions incorrectly and breaks coherency.
- * Disable reording and take a potential performance hit.
+ * Disable reordering and take a potential performance hit.
  * This is safe to do here and not in MC init since there is nothing
  * to maintain coherency with and the cache is not enabled yet.
  */
diff --git a/src/cpu/amd/geode_gx2/cpureginit.c b/src/cpu/amd/geode_gx2/cpureginit.c
index 0fc852d531..e0ecd62722 100644
--- a/src/cpu/amd/geode_gx2/cpureginit.c
+++ b/src/cpu/amd/geode_gx2/cpureginit.c
@@ -15,7 +15,7 @@ void cpuRegInit (void)
 		/* Set up GLCP to grab BTM data. */
 		msrnum = GLCP_DBGOUT;		/* GLCP_DBGOUT MSR */
 		msr.hi =  0x0;
-		msr.lo =  0x08;			/* reset value (SCOPE_SEL = 0) causes FIFO toshift out, */
+		msr.lo =  0x08;			/* reset value (SCOPE_SEL = 0) causes FIFO to shift out, */
 		wrmsr(msrnum, msr);		/* exchange it to anything else to prevent this */
 
 		/* Turn off debug clock */
@@ -119,7 +119,7 @@ void cpuRegInit (void)
 		wrmsr(msrnum, msr);
 	}
 
-/* FPU impercise exceptions bit */
+/* FPU imprecise exceptions bit */
 	{
 		msrnum = CPU_FPU_MSR_MODE;
 		msr = rdmsr(msrnum);
diff --git a/src/cpu/amd/geode_lx/cpubug.c b/src/cpu/amd/geode_lx/cpubug.c
index 4110454566..ebadec7f7a 100644
--- a/src/cpu/amd/geode_lx/cpubug.c
+++ b/src/cpu/amd/geode_lx/cpubug.c
@@ -67,7 +67,7 @@ static void pcideadlock(void)
 /***/
 /**	PBZ 3659:*/
 /**	 The MC reordered transactions incorrectly and breaks coherency.*/
-/**	 Disable reording and take a potential performance hit.*/
+/**	 Disable reordering and take a potential performance hit.*/
 /**	 This is safe to do here and not in MC init since there is nothing*/
 /**	 to maintain coherency with and the cache is not enabled yet.*/
 /***/
diff --git a/src/cpu/amd/model_10xxx/defaults.h b/src/cpu/amd/model_10xxx/defaults.h
index f7b8b2f9e1..3d33dda029 100644
--- a/src/cpu/amd/model_10xxx/defaults.h
+++ b/src/cpu/amd/model_10xxx/defaults.h
@@ -54,7 +54,7 @@ static const struct {
 
 	{ DC_CFG, AMD_DR_Bx, AMD_PTYPE_SVR,
 	  0x00000000, 0x00000000,
-	  0x00000000, 0x00000C00 },	/* Errata 326 */
+	  0x00000000, 0x00000C00 },	/* Erratum 326 */
 
 	{ NB_CFG, AMD_FAM10_ALL, AMD_PTYPE_DC | AMD_PTYPE_MC,
 	  0x00000000, 1 << 22,
diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c
index ebe44dd76a..4297c90460 100644
--- a/src/cpu/amd/model_10xxx/fidvid.c
+++ b/src/cpu/amd/model_10xxx/fidvid.c
@@ -68,7 +68,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
 
 9.- TODO Requires information on current delivery capability
     (depends on mainboard and maybe power supply ?). One might use a config
-    option with the maximum number of Ampers that the board can deliver to CPU.
+    option with the maximum number of Amperes that the board can deliver to CPU.
 
 10.- [Multiprocessor] TODO 2.4.2.12
      [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2,
@@ -79,7 +79,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
 11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway)
 
 12.- generate ACPI for p-states. FIXME
-     Needs more assesment. There's some kind of fixed support that
+     Needs more assessment. There's some kind of fixed support that
      does not seem to depend on CPU revision or actual MSRC001_00[68:64]
      as BKDG apparently requires.
      http://www.coreboot.org/ACPI#CPU_Power_Management
@@ -935,7 +935,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
 
 static void finalPstateChange(void)
 {
-	/* Enble P0 on all cores for best performance.
+	/* Enable P0 on all cores for best performance.
 	 * Linux can slow them down later if need be.
 	 * It is safe since they will be in C1 halt
 	 * most of the time anyway.
diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c
index 3d5ddcfb35..eb047b8db2 100644
--- a/src/cpu/amd/model_10xxx/init_cpus.c
+++ b/src/cpu/amd/model_10xxx/init_cpus.c
@@ -424,7 +424,7 @@ static void start_node(u8 node)
 /**
  * static void setup_remote_node(u32 node)
  *
- * Copy the BSP Adress Map to each AP.
+ * Copy the BSP Address Map to each AP.
  */
 static void setup_remote_node(u8 node)
 {
diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c
index 06ff636659..e68611bca8 100644
--- a/src/cpu/amd/model_fxx/fidvid.c
+++ b/src/cpu/amd/model_fxx/fidvid.c
@@ -496,7 +496,7 @@ static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp)
 			continue;
 		if ((readback & 0xff) == 2) {
 			timeout = 0;
-			break;	/* target ap is stage 2, it's FID has beed set */
+			break;	/* target ap is stage 2, its FID has been set */
 		}
 	}
 
@@ -603,7 +603,7 @@ static void init_fidvid_bsp(unsigned bsp_apicid)
 
 	/* For all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
 	 *  send signal to the AP it could change it's fid/vid */
-	/* remote read singnal from AP that AP is done */
+	/* remote read signal from AP that AP is done */
 
 	fv.common_fidvid &= 0xffff00;
 
diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c
index a18b982bdb..42c6f95119 100644
--- a/src/cpu/amd/model_fxx/model_fxx_init.c
+++ b/src/cpu/amd/model_fxx/model_fxx_init.c
@@ -509,7 +509,7 @@ static void model_fxx_init(device_t dev)
 
 	id = get_node_core_id(read_nb_cfg_54());	// pre e0 nb_cfg_54 can not be set
 
-	/* Is this a bad location?  In particular can another node prefecth
+	/* Is this a bad location?  In particular can another node prefetch
 	 * data from this node before we have initialized it?
 	 */
 	if (id.coreid == 0)
diff --git a/src/cpu/amd/model_fxx/powernow_acpi.c b/src/cpu/amd/model_fxx/powernow_acpi.c
index 820d4262e6..af1e24b094 100644
--- a/src/cpu/amd/model_fxx/powernow_acpi.c
+++ b/src/cpu/amd/model_fxx/powernow_acpi.c
@@ -75,7 +75,7 @@ static int write_pstates_for_core(u8 pstate_num, u16 *pstate_feq, u8 *pstate_vid
 
 #if CONFIG_K8_REV_F_SUPPORT
 /*
-* Details about this algorithm , refert to BDKG 10.5.1
+* Details about this algorithm , refer to BDKG 10.5.1
 * Two parts are included, the another is the DSDT reconstruction process
 */
 
@@ -202,7 +202,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP)
 		goto write_pstates;
 	}
 
-	/* Get the multipier of the fid frequency */
+	/* Get the multiplier of the fid frequency */
 	/*
 	 * Fid multiplier is always 100 revF and revG.
 	 */
@@ -316,7 +316,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP)
 		Pstate_num++;
 	}
 
-	/* Constuct P[Min] State */
+	/* Construct P[Min] State */
 	if (Max_fid == 0x2A && Max_vid != 0x0) {
 		Pstate_fid[Pstate_num] = 0x2;
 		Pstate_feq[Pstate_num] =
diff --git a/src/cpu/amd/mtrr/amd_mtrr.c b/src/cpu/amd/mtrr/amd_mtrr.c
index 2f3e6e340f..033ec53d3a 100644
--- a/src/cpu/amd/mtrr/amd_mtrr.c
+++ b/src/cpu/amd/mtrr/amd_mtrr.c
@@ -128,10 +128,10 @@ void amd_setup_mtrrs(void)
 	}
 
 	/* Now that I have mapped what is memory and what is not
-	 * Setup the mtrrs so we can cache the memory.
+	 * Set up the mtrrs so we can cache the memory.
 	 */
 
-	// Rev. F K8 supports has SYSCFG_MSR_TOM2WB and dont need
+	// Rev. F K8 supports has SYSCFG_MSR_TOM2WB and doesn't need
 	// variable MTRR to span memory above 4GB
 	// Lower revisions K8 need variable MTRR over 4GB
 	x86_setup_var_mtrrs(address_bits, has_tom2wb ? 0 : 1);
diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c
index e0d173dd79..d653a85d5a 100644
--- a/src/cpu/amd/quadcore/amd_sibling.c
+++ b/src/cpu/amd/quadcore/amd_sibling.c
@@ -95,10 +95,10 @@ u32 get_apicid_base(u32 ioapic_num)
 	nb_cfg_54 = read_nb_cfg_54();
 
 
-	//contruct apicid_base
+	//Construct apicid_base
 
 	if((!disable_siblings) && (siblings>0) ) {
-		/* for 8 way dual core, we will used up apicid 16:16, actualy
+		/* for 8 way dual core, we will used up apicid 16:16, actually
 		   16 is not allowed by current kernel and the kernel will try
 		   to get one that is small than 16 to make io apic work. I don't
 		   know when the kernel can support 256 apic id.