diff options
author | Arthur Heymans <arthur@aheymans.xyz> | 2019-11-19 15:51:51 +0100 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2019-11-21 09:28:41 +0000 |
commit | de56a66e73442d1fb132f466bb556563bee0639d (patch) | |
tree | 2bd7f4263f2de87eae1ea1986f7d1e4b41649247 /src/cpu/amd/family_10h-family_15h/fidvid.c | |
parent | eef63607b846fbbd94104f3b5e8f1d857d8f4741 (diff) |
cpu/amd/fam10: Drop support
Relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK are
now mandatory features, which this platform lacks.
Change-Id: I3c69f158a5667783292161815f9ae61195b5e03b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36963
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/cpu/amd/family_10h-family_15h/fidvid.c')
-rw-r--r-- | src/cpu/amd/family_10h-family_15h/fidvid.c | 1102 |
1 files changed, 0 insertions, 1102 deletions
diff --git a/src/cpu/amd/family_10h-family_15h/fidvid.c b/src/cpu/amd/family_10h-family_15h/fidvid.c deleted file mode 100644 index d4dec2b1c0..0000000000 --- a/src/cpu/amd/family_10h-family_15h/fidvid.c +++ /dev/null @@ -1,1102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -/* - * This file initializes the CPU cores for voltage and frequency settings - * in the different power states. - */ -/* - -checklist (functions are in this file if no source file named) -Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 - -2.4.2.6 Requirements for p-states - -1.- F3x[84:80] According to table 100 : prep_fid_change - -2.- COF/VID : - 2.4.2.9.1 Steps 1,3-6 and warning for 2,7 if they apply - fixPsNbVidBeforeWR(...) - 2.4.2.9.1 Step 8 enable_fid_change - We do this for all nodes, I don't understand BKDG 100% on - whether this is or isn't meant by "on the local - processor". Must be OK. - 2.4.2.9.1 Steps 9-10 (repeat 1-7 and reset) romstage.c/init_cpus ? - 2.4.2.9.1 Steps 11-12 init_fidvid_stage2 - 2.4.2.9.2 DualPlane PVI : Not supported, don't know how to detect, - needs specific circuitry. - -3.- 2.4.2.7 dualPlaneOnly(dev) - -4.- 2.4.2.8 applyBoostFIDOffset(dev, nodeid) - -5.- enableNbPState1(dev) - -6.- 2.4.1.7 - a) UpdateSinglePlaneNbVid() - b) setVSRamp(), called from prep_fid_change - c) prep_fid_change - d) improperly, for lack of voltage regulator details?, - F3xA0[PsiVidEn] in defaults.h - F3xA0[PsiVid] in init_cpus.c AMD_SetupPSIVID_d (before prep_fid_change) - -7.- TODO (Core Performance Boost is only available in revision E cpus, and we - don't seem to support those yet, at least they don't have any - constant in amddefs.h ) - -8.- FIXME ? Transition to min Pstate according to 2.4.2.15.3 is required - by 2.4.2.6 after warm reset. But 2.4.2.15 states that it is not required - if the warm reset is issued by coreboot to update NbFid. So it is required - or not ? How can I tell who issued warm reset ? - coreboot transitions to P0 instead, which is not recommended, and does - not follow 2.4.2.15.2 to do so. - -9.- TODO Requires information on current delivery capability - (depends on mainboard and maybe power supply ?). One might use a config - option with the maximum number of Amperes that the board can deliver to CPU. - -10.- [Multiprocessor] TODO 2.4.2.12 - [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2, - but not sure this is what is meant by "Determine the valid set of - P-states based on enabled P-states indicated - in MSRC001_00[68:64][PstateEn]" in 2.4.2.6-10 - -11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway) - -12.- generate ACPI for p-states. - generated in powernow_acpi.c amd_generate_powernow() - -"must also be completed" - -a.- PllLockTime set in ruleset in defaults.h - BKDG says set it "If MSRC001_00[68:64][CpuFid] is different between - any two enabled P-states", but since it does not say "only if" - I guess it is safe to do it always. - -b.- prep_fid_change(...) - - */ - -#include <console/console.h> -#include <cpu/amd/msr.h> -#include <device/pci_ops.h> -#include <stdint.h> -#include <northbridge/amd/amdht/AsPsDefs.h> -#include <stdlib.h> - -static inline void print_debug_fv(const char *str, u32 val) -{ -#if CONFIG(SET_FIDVID_DEBUG) - printk(BIOS_DEBUG, "%s%x\n", str, val); -#endif -} - -static inline void print_debug_fv_8(const char *str, u8 val) -{ -#if CONFIG(SET_FIDVID_DEBUG) - printk(BIOS_DEBUG, "%s%02x\n", str, val); -#endif -} - -static inline void print_debug_fv_64(const char *str, u32 val, u32 val2) -{ -#if CONFIG(SET_FIDVID_DEBUG) - printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2); -#endif -} - -struct fidvid_st { - u32 common_fid; -}; - -static void enable_fid_change(u8 fid) -{ - u32 dword; - u32 nodes; - pci_devfn_t dev; - int i; - - nodes = get_nodes(); - - for (i = 0; i < nodes; i++) { - dev = NODE_PCI(i, 3); - dword = pci_read_config32(dev, 0xd4); - dword &= ~0x1F; - dword |= (u32) fid & 0x1F; - dword |= 1 << 5; // enable - pci_write_config32(dev, 0xd4, dword); - printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x\n", i, - dword); - } -} - -static void applyBoostFIDOffset(pci_devfn_t dev, uint32_t nodeid) -{ - // BKDG 2.4.2.8 - // Fam10h revision E only, but E is apparently not supported yet, therefore untested - if ((cpuid_edx(0x80000007) & CPB_MASK) - && ((cpuid_ecx(0x80000008) & NC_MASK) == 5) ) { - u32 core = get_node_core_id_x().coreid; - u32 asymetricBoostThisCore = ((pci_read_config32(dev, 0x10C) >> (core*2))) & 3; - msr_t msr = rdmsr(PSTATE_0_MSR); - u32 cpuFid = msr.lo & PS_CPU_FID_MASK; - cpuFid = cpuFid + asymetricBoostThisCore; - msr.lo &= ~PS_CPU_FID_MASK; - msr.lo |= cpuFid; - wrmsr(PSTATE_0_MSR, msr); - } else if (is_fam15h()) { - uint32_t dword = pci_read_config32(NODE_PCI(nodeid, 4), 0x15c); - uint8_t boost_count = (dword >> 2) & 0x7; - if (boost_count > 0) { - /* Enable boost */ - dword &= ~0x3; - dword |= 0x1; - pci_write_config32(NODE_PCI(nodeid, 4), 0x15c, dword); - } - } -} - -static void enableNbPState1(pci_devfn_t dev) -{ - uint64_t cpuRev = mctGetLogicalCPUID(0xFF); - if (cpuRev & AMD_FAM10_C3) { - u32 nbPState = (pci_read_config32(dev, 0x1F0) & NB_PSTATE_MASK); - if ( nbPState){ - u32 nbVid1 = (pci_read_config32(dev, 0x1F4) & NB_VID1_MASK) >> NB_VID1_SHIFT; - u32 i; - for (i = nbPState; i < NM_PS_REG; i++) { - msr_t msr = rdmsr(PSTATE_0_MSR + i); - if (msr.hi & PS_EN_MASK ) { - msr.hi |= NB_DID_M_ON; - msr.lo &= NB_VID_MASK_OFF; - msr.lo |= ( nbVid1 << NB_VID_POS); - wrmsr(PSTATE_0_MSR + i, msr); - } - } - } - } -} - -static u8 setPStateMaxVal(pci_devfn_t dev) -{ - u8 i, maxpstate=0; - for (i = 0; i < NM_PS_REG; i++) { - msr_t msr = rdmsr(PSTATE_0_MSR + i); - if (msr.hi & PS_IDD_VALUE_MASK) { - msr.hi |= PS_EN_MASK; - wrmsr(PSTATE_0_MSR + i, msr); - } - if (msr.hi & PS_EN_MASK) { - maxpstate = i; - } - } - //FIXME: CPTC2 and HTC_REG should get max per node, not per core ? - u32 reg = pci_read_config32(dev, CPTC2); - reg &= PS_MAX_VAL_MASK; - reg |= (maxpstate << PS_MAX_VAL_POS); - pci_write_config32(dev, CPTC2,reg); - return maxpstate; -} - -static void dualPlaneOnly(pci_devfn_t dev) -{ - // BKDG 2.4.2.7 - - uint64_t cpuRev = mctGetLogicalCPUID(0xFF); - if ((mctGetProcessorPackageType() == AMD_PKGTYPE_AM3_2r2) - && (cpuRev & (AMD_DR_Cx | AMD_DR_Ex))) { - if ((pci_read_config32(dev, 0x1FC) & DUAL_PLANE_ONLY_MASK) - && (pci_read_config32(dev, 0xA0) & PVI_MODE)) { - if (cpuid_edx(CPUID_EXT_PM) & CPB_MASK) { - // revision E only, but E is apparently not supported yet, therefore untested - msr_t minPstate = rdmsr(PSTATE_1_MSR); - wrmsr(PSTATE_1_MSR, rdmsr(PSTATE_4_MSR)); - wrmsr(PSTATE_4_MSR, minPstate); - } else { - msr_t msr; - msr.lo=0; msr.hi=0; - wrmsr(PSTATE_0_MSR, rdmsr(PSTATE_4_MSR)); - wrmsr(PSTATE_4_MSR, msr); - } - - //FIXME: CPTC2 and HTC_REG should get max per node, not per core ? - u8 maxpstate = setPStateMaxVal(dev); - - u32 reg = pci_read_config32(dev, HTC_REG); - reg &= HTC_PS_LMT_MASK; - reg |= (maxpstate << PS_LIMIT_POS); - pci_write_config32(dev, HTC_REG,reg); - } - } -} - -static int vidTo100uV(u8 vid) -{ - // returns voltage corresponding to vid in tenths of mV, i.e. hundreds of uV - // BKDG #31116 rev 3.48 2.4.1.6 - int voltage; - if (vid >= 0x7c) { - voltage = 0; - } else { - voltage = (15500 - (125*vid)); - } - return voltage; -} - -static void setVSRamp(pci_devfn_t dev) -{ - /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime] - * If this field accepts 8 values between 10 and 500 us why - * does page 324 say "BIOS should set this field to 001b." - * (20 us) ? - * Shouldn't it depend on the voltage regulators, mainboard - * or something ? - */ - u32 dword; - dword = pci_read_config32(dev, 0xd8); - dword &= VSRAMP_MASK; - dword |= VSRAMP_VALUE; - pci_write_config32(dev, 0xd8, dword); -} - -static void recalculateVsSlamTimeSettingOnCorePre(pci_devfn_t dev) -{ - u8 pviModeFlag; - u8 highVoltageVid, lowVoltageVid, bValue; - u16 minimumSlamTime; - u16 vSlamTimes[7] = { 1000, 2000, 3000, 4000, 6000, 10000, 20000 }; /* Reg settings scaled by 100 */ - u32 dtemp; - msr_t msr; - - /* This function calculates the VsSlamTime using the range of possible - * voltages instead of a hardcoded 200us. - * Note: his function is called only from prep_fid_change, - * and that from init_cpus.c finalize_node_setup() - * (after set AMD MSRs and init ht ) - */ - - /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */ - /* Calculate Slam Time - * Vslam = (mobileCPU?0.2:0.4)us/mV * (Vp0 - (lowest out of Vpmin or Valt)) mV - * In our case, we will scale the values by 100 to avoid - * decimals. - */ - - /* Determine if this is a PVI or SVI system */ - if (is_fam15h()) { - pviModeFlag = 0; - } else { - dtemp = pci_read_config32(dev, 0xa0); - - if (dtemp & PVI_MODE) - pviModeFlag = 1; - else - pviModeFlag = 0; - } - - /* Get P0's voltage */ - /* MSRC001_00[68:64] are not programmed yet when called from - prep_fid_change, one might use F4x1[F0:E0] instead, but - theoretically MSRC001_00[68:64] are equal to them after - reset. */ - msr = rdmsr(PSTATE_0_MSR); - highVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F); - if (!(msr.hi & 0x80000000)) { - printk(BIOS_ERR,"P-state info in MSRC001_0064 is invalid !!!\n"); - highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0) - >> PS_CPU_VID_SHFT) & 0x7F); - } - - /* If SVI, we only care about CPU VID. - * If PVI, determine the higher voltage b/t NB and CPU - */ - if (pviModeFlag) { - bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F); - if (highVoltageVid > bValue) - highVoltageVid = bValue; - } - - /* Get PSmax's index */ - msr = rdmsr(PS_LIM_REG); - bValue = (u8) ((msr.lo >> PS_MAX_VAL_SHFT) & BIT_MASK_3); - - /* Get PSmax's VID */ - msr = rdmsr(PSTATE_0_MSR + bValue); - lowVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F); - if (!(msr.hi & 0x80000000)) { - printk(BIOS_ERR, "P-state info in MSR%8x is invalid !!!\n", - PSTATE_0_MSR + bValue); - lowVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0+(bValue*4)) - >> PS_CPU_VID_SHFT) & 0x7F); - } - - /* If SVI, we only care about CPU VID. - * If PVI, determine the higher voltage b/t NB and CPU - * BKDG 2.4.1.7 (a) - */ - if (pviModeFlag) { - bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F); - if (lowVoltageVid > bValue) - lowVoltageVid = bValue; - } - - /* Get AltVID */ - dtemp = pci_read_config32(dev, 0xdc); - bValue = (u8) (dtemp & BIT_MASK_7); - - /* Use the VID with the lowest voltage (higher VID) */ - if (lowVoltageVid < bValue) - lowVoltageVid = bValue; - - u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB; - minimumSlamTime = (mobileFlag?2:4) * (vidTo100uV(highVoltageVid) - vidTo100uV(lowVoltageVid)); /* * 0.01 us */ - - - /* Now round up to nearest register setting. - * Note that if we don't find a value, we - * will fall through to a value of 7 - */ - for (bValue = 0; bValue < 7; bValue++) { - if (minimumSlamTime <= vSlamTimes[bValue]) - break; - } - - /* Apply the value */ - dtemp = pci_read_config32(dev, 0xD8); - dtemp &= VSSLAM_MASK; - dtemp |= bValue; - pci_write_config32(dev, 0xd8, dtemp); -} - -static u32 nb_clk_did(uint8_t node, uint64_t cpuRev, uint8_t procPkg) { - uint8_t link0isGen3 = 0; - uint8_t offset; - if (AMD_CpuFindCapability(node, 0, &offset)) { - link0isGen3 = (AMD_checkLinkType(node, offset) & HTPHY_LINKTYPE_HT3 ); - } - /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package - S1g3 in link Gen3 mode, but I don't know how to tell - package S1g3 from S1g4 */ - if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX) - && link0isGen3) { - return 5; /* divide clk by 128*/ - } else { - return 4; /* divide clk by 16 */ - } -} - - -static u32 power_up_down(int node, u8 procPkg) { - uint32_t dword=0; - /* from CPU rev guide #41322 rev 3.74 June 2010 Table 26 */ - u8 singleLinkFlag = ((procPkg == AMD_PKGTYPE_AM3_2r2) - || (procPkg == AMD_PKGTYPE_S1gX) - || (procPkg == AMD_PKGTYPE_ASB2)); - - if (singleLinkFlag) { - /* - * PowerStepUp=01000b - 50nS - * PowerStepDown=01000b - 50ns - */ - dword |= PW_STP_UP50 | PW_STP_DN50; - } else { - uint32_t dispRefModeEn = (pci_read_config32(NODE_PCI(node,0),0x68) >> 24) & 1; - uint32_t isocEn = 0; - int j; - for (j=0; (j<4) && (!isocEn); j++ ) { - u8 offset; - if (AMD_CpuFindCapability(node, j, &offset)) { - isocEn = (pci_read_config32(NODE_PCI(node,0),offset+4) >>12) & 1; - } - } - - if (is_fam15h()) { - /* Family 15h always uses 100ns for multilink processors */ - dword |= PW_STP_UP100 | PW_STP_DN100; - } else if (dispRefModeEn || isocEn) { - dword |= PW_STP_UP50 | PW_STP_DN50; - } else { - /* get number of cores for PowerStepUp & PowerStepDown in server - * 1 core - 400nS - 0000b - * 2 cores - 200nS - 0010b - * 3 cores - 133nS -> 100nS - 0011b - * 4 cores - 100nS - 0011b - */ - switch (get_core_num_in_bsp(node)) { - case 0: - dword |= PW_STP_UP400 | PW_STP_DN400; - break; - case 1: - case 2: - dword |= PW_STP_UP200 | PW_STP_DN200; - break; - case 3: - dword |= PW_STP_UP100 | PW_STP_DN100; - break; - default: - dword |= PW_STP_UP100 | PW_STP_DN100; - break; - } - } - } - - return dword; -} - -static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t procPkg) { - - pci_devfn_t dev = NODE_PCI(node, 3); - - /* Program fields in Clock Power/Control register0 (F3xD4) */ - - /* set F3xD4 Clock Power/Timing Control 0 Register - * NbClkDidApplyAll=1b - * NbClkDid=100b or 101b - * PowerStepUp= "platform dependent" - * PowerStepDown= "platform dependent" - * LinkPllLink=01b - * ClkRampHystCtl=HW default - * ClkRampHystSel=1111b - */ - uint32_t dword= pci_read_config32(dev, 0xd4); - dword &= CPTC0_MASK; - dword |= NB_CLKDID_ALL | LNK_PLL_LOCK | CLK_RAMP_HYST_SEL_VAL; - dword |= (nb_clk_did(node,cpuRev,procPkg) << NB_CLKDID_SHIFT); - - dword |= power_up_down(node, procPkg); - - pci_write_config32(dev, 0xd4, dword); - -} - -static void config_power_ctrl_misc_reg(pci_devfn_t dev, uint64_t cpuRev, - uint8_t procPkg) -{ - /* check PVI/SVI */ - uint32_t dword = pci_read_config32(dev, 0xa0); - - /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xA0[VSSlamVidMod] */ - /* PllLockTime and PsiVidEn set in ruleset in defaults.h */ - if (dword & PVI_MODE) { /* PVI */ - /* set slamVidMode to 0 for PVI */ - dword &= VID_SLAM_OFF; - } else { /* SVI */ - /* set slamVidMode to 1 for SVI */ - dword |= VID_SLAM_ON; - } - /* set the rest of A0 since we're at it... */ - - if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) { - dword |= NB_PSTATE_FORCE_ON; - } // else should we clear it ? - - - if ((procPkg == AMD_PKGTYPE_G34) || (procPkg == AMD_PKGTYPE_C32) ) { - dword |= BP_INS_TRI_EN_ON; - } - - /* TODO: look into C1E state and F3xA0[IdleExitEn]*/ - #if 0 - if (cpuRev & AMD_FAM10_C3) { - dword |= SVI_HIGH_FREQ_ON; - } - #endif - pci_write_config32(dev, 0xa0, dword); -} - -static void config_nb_syn_ptr_adj(pci_devfn_t dev, uint64_t cpuRev) -{ - /* Note the following settings are additional from the ported - * function setFidVidRegs() - */ - /* adjust FIFO between nb and core clocks to max allowed - values (min latency) */ - uint32_t nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK; - uint8_t nbSynPtrAdj; - if ((cpuRev & (AMD_DR_Bx | AMD_DA_Cx | AMD_FAM15_ALL) ) - || ((cpuRev & AMD_RB_C3) && (nbPstate != 0))) { - nbSynPtrAdj = 5; - } else { - nbSynPtrAdj = 6; - } - - uint32_t dword = pci_read_config32(dev, 0xdc); - dword &= ~NB_SYN_PTR_ADJ_MASK; - dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS; - /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */ - pci_write_config32(dev, 0xdc, dword); -} - -static void config_acpi_pwr_state_ctrl_regs(pci_devfn_t dev, uint64_t cpuRev, - uint8_t procPkg) -{ - if (is_fam15h()) { - /* Family 15h BKDG Rev. 3.14 D18F3x80 recommended settings */ - pci_write_config32(dev, 0x80, 0xe20be281); - - /* Family 15h BKDG Rev. 3.14 D18F3x84 recommended settings */ - pci_write_config32(dev, 0x84, 0x01e200e2); - } else { - /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ - uint32_t dword; - uint32_t c1= 1; - if (cpuRev & (AMD_DR_Bx)) { - // will coreboot ever enable cache scrubbing ? - // if it does, will it be enough to check the current state - // or should we configure for what we'll set up later ? - dword = pci_read_config32(dev, 0x58); - uint32_t scrubbingCache = dword & - ( (0x1F << 16) // DCacheScrub - | (0x1F << 8) ); // L2Scrub - if (scrubbingCache) { - c1 = 0x80; - } else { - c1 = 0xA0; - } - } else { // rev C or later - // same doubt as cache scrubbing: ok to check current state ? - dword = pci_read_config32(dev, 0xdc); - uint32_t cacheFlushOnHalt = dword & (7 << 16); - if (!cacheFlushOnHalt) { - c1 = 0x80; - } - } - dword = (c1 << 24) | (0xE641E6); - pci_write_config32(dev, 0x84, dword); - - /* FIXME: BKDG Table 100 says if the link is at a Gen1 - * frequency and the chipset does not support a 10us minimum LDTSTOP - * assertion time, then { If ASB2 && SVI then smaf001 = F6h else - * smaf001=87h. } else ... I hardly know what it means or how to check - * it from here, so I bluntly assume it is false and code here the else, - * which is easier - */ - - uint32_t smaf001 = 0xE6; - if (cpuRev & AMD_DR_Bx ) { - smaf001 = 0xA6; - } else { - #if 0 - if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) { - smaf001 = 0xF6; - } - #endif - } - uint32_t fidvidChange = 0; - if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX)) - || (cpuRev & AMD_RB_C3) ) { - fidvidChange=0x0B; - } - dword = (0xE6 << 24) | (fidvidChange << 16) - | (smaf001 << 8) | 0x81; - pci_write_config32(dev, 0x80, dword); - } -} - -void prep_fid_change(void) -{ - u32 dword; - u32 nodes; - pci_devfn_t dev; - int i; - - /* This needs to be run before any Pstate changes are requested */ - - nodes = get_nodes(); - - for (i = 0; i < nodes; i++) { - printk(BIOS_DEBUG, "Prep FID/VID Node:%02x\n", i); - dev = NODE_PCI(i, 3); - uint64_t cpuRev = mctGetLogicalCPUID(0xFF); - u8 procPkg = mctGetProcessorPackageType(); - - setVSRamp(dev); - /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */ - /* Figure out the value for VsSlamTime and program it */ - recalculateVsSlamTimeSettingOnCorePre(dev); - - config_clk_power_ctrl_reg0(i,cpuRev,procPkg); - - config_power_ctrl_misc_reg(dev,cpuRev,procPkg); - config_nb_syn_ptr_adj(dev,cpuRev); - - config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg); - - dword = pci_read_config32(dev, 0x80); - printk(BIOS_DEBUG, " F3x80: %08x\n", dword); - dword = pci_read_config32(dev, 0x84); - printk(BIOS_DEBUG, " F3x84: %08x\n", dword); - dword = pci_read_config32(dev, 0xd4); - printk(BIOS_DEBUG, " F3xD4: %08x\n", dword); - dword = pci_read_config32(dev, 0xd8); - printk(BIOS_DEBUG, " F3xD8: %08x\n", dword); - dword = pci_read_config32(dev, 0xdc); - printk(BIOS_DEBUG, " F3xDC: %08x\n", dword); - } -} - -static void waitCurrentPstate(u32 target_pstate) { - msr_t initial_msr = rdmsr(TSC_MSR); - msr_t pstate_msr = rdmsr(PS_STS_REG); - msr_t tsc_msr; - u8 timedout; - - /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a - * P1 that is a copy of P0, therefore has the same NB DID but the - * TSC will count twice per tick, so we have to wait for twice the - * count to achieve the desired timeout. But I'm likely to - * misunderstand this... - */ - u32 corrected_timeout = ((pstate_msr.lo==1) - && (!(rdmsr(PSTATE_1_MSR).lo & NB_DID_M_ON))) ? - WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT; - msr_t timeout; - - timeout.lo = initial_msr.lo + corrected_timeout; - timeout.hi = initial_msr.hi; - if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) { - timeout.hi++; - } - - // assuming TSC ticks at 1.25 ns per tick (800 MHz) - do { - pstate_msr = rdmsr(PS_STS_REG); - tsc_msr = rdmsr(TSC_MSR); - timedout = (tsc_msr.hi > timeout.hi) - || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo )); - } while ( (pstate_msr.lo != target_pstate) && (! timedout) ); - - if (pstate_msr.lo != target_pstate) { - msr_t limit_msr = rdmsr(PS_LIM_REG); - printk(BIOS_ERR, "*** APIC ID %02x: timed out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%08x %08x\n", - cpuid_ebx(0x00000001) >> 24, target_pstate, pstate_msr.lo, limit_msr.hi, limit_msr.lo); - - do { // should we just go on instead ? - pstate_msr = rdmsr(PS_STS_REG); - } while (pstate_msr.lo != target_pstate); - } -} - -static void set_pstate(u32 nonBoostedPState) { - msr_t msr; - uint8_t skip_wait; - - // Transition P0 for calling core. - msr = rdmsr(PS_CTL_REG); - - msr.lo = nonBoostedPState; - wrmsr(PS_CTL_REG, msr); - - if (is_fam15h()) { - /* Do not wait for the first (even) set of cores to transition on Family 15h systems */ - if ((cpuid_ebx(0x00000001) & 0x01000000)) - skip_wait = 0; - else - skip_wait = 1; - } else { - skip_wait = 0; - } - - if (!skip_wait) { - /* Wait for core to transition to P0 */ - waitCurrentPstate(nonBoostedPState); - } -} - -static void UpdateSinglePlaneNbVid(void) -{ - u32 nbVid, cpuVid; - u8 i; - msr_t msr; - - /* copy higher voltage (lower VID) of NBVID & CPUVID to both */ - for (i = 0; i < 5; i++) { - msr = rdmsr(PSTATE_0_MSR + i); - nbVid = (msr.lo & PS_CPU_VID_M_ON) >> PS_CPU_VID_SHFT; - cpuVid = (msr.lo & PS_NB_VID_M_ON) >> PS_NB_VID_SHFT; - - if (nbVid != cpuVid) { - if (nbVid > cpuVid) - nbVid = cpuVid; - - msr.lo = msr.lo & PS_BOTH_VID_OFF; - msr.lo = msr.lo | (u32) ((nbVid) << PS_NB_VID_SHFT); - msr.lo = msr.lo | (u32) ((nbVid) << PS_CPU_VID_SHFT); - wrmsr(PSTATE_0_MSR + i, msr); - } - } -} - -static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode) -{ - msr_t msr; - u8 startup_pstate; - - /* This function sets NbVid before the warm reset. - * Get StartupPstate from MSRC001_0071. - * Read Pstate register pointed by [StartupPstate]. - * and copy its content to P0 and P1 registers. - * Copy newNbVid to P0[NbVid]. - * transition to P1 on all cores, - * then transition to P0 on core 0. - * Wait for MSRC001_0063[CurPstate] = 000b on core 0. - * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration - * for SVI and Single-Plane PVI Systems - */ - - msr = rdmsr(MSR_COFVID_STS); - startup_pstate = (msr.hi >> (32 - 32)) & 0x07; - - /* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for - * this node in P0. Then transition to P1 for corex and P0 - * for core0. These setting will be cleared by the warm reset - */ - msr = rdmsr(PSTATE_0_MSR + startup_pstate); - wrmsr(PSTATE_1_MSR, msr); - wrmsr(PSTATE_0_MSR, msr); - - /* missing step 2 from BDKG , F3xDC[PstateMaxVal] = - * max(1,F3xDC[PstateMaxVal] ) because it would take - * synchronization between cores and we don't think - * PstatMaxVal is going to be 0 on cold reset anyway ? - */ - if (!(pci_read_config32(dev, 0xdc) & (~PS_MAX_VAL_MASK))) { - printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1\n"); - }; - - msr.lo &= ~0xFE000000; // clear nbvid - msr.lo |= (newNbVid << 25); - wrmsr(PSTATE_0_MSR, msr); - - if (pviMode) { /* single plane*/ - UpdateSinglePlaneNbVid(); - } - - // Transition to P1 for all APs and P0 for core0. - set_pstate(1); - - if (coreid == 0) { - set_pstate(0); - } - - /* missing step 7 (restore PstateMax to 0 if needed) because - * we skipped step 2 - */ - -} - -static u32 needs_NB_COF_VID_update(void) -{ - u8 nb_cof_vid_update; - u8 nodes; - u8 i; - - if (is_fam15h()) - return 0; - - /* If any node has nb_cof_vid_update set all nodes need an update. */ - nodes = get_nodes(); - nb_cof_vid_update = 0; - for (i = 0; i < nodes; i++) { - uint64_t cpuRev = mctGetLogicalCPUID(i); - u32 nbCofVidUpdateDefined = (cpuRev & (AMD_FAM10_LT_D)); - if (nbCofVidUpdateDefined - && (pci_read_config32(NODE_PCI(i, 3), 0x1FC) - & NB_COF_VID_UPDATE_MASK)) { - nb_cof_vid_update = 1; - break; - } - } - return nb_cof_vid_update; -} - -static u32 init_fidvid_core(u32 nodeid, u32 coreid) -{ - pci_devfn_t dev; - u32 vid_max; - u32 fid_max = 0; - u8 nb_cof_vid_update = needs_NB_COF_VID_update(); - u8 pvimode; - u32 reg1fc; - - /* Steps 1-6 of BIOS NB COF and VID Configuration - * for SVI and Single-Plane PVI Systems. BKDG 2.4.2.9 #31116 rev 3.48 - */ - dev = NODE_PCI(nodeid, 3); - if (is_fam15h()) - pvimode = 0; - else - pvimode = pci_read_config32(dev, PW_CTL_MISC) & PVI_MODE; - reg1fc = pci_read_config32(dev, 0x1FC); - - if (nb_cof_vid_update) { - vid_max = (reg1fc & SINGLE_PLANE_NB_VID_MASK ) >> SINGLE_PLANE_NB_VID_SHIFT; - fid_max = (reg1fc & SINGLE_PLANE_NB_FID_MASK ) >> SINGLE_PLANE_NB_FID_SHIFT; - - if (!pvimode) { /* SVI, dual power plane */ - vid_max = vid_max - ((reg1fc & DUAL_PLANE_NB_VID_OFF_MASK ) >> DUAL_PLANE_NB_VID_SHIFT ); - fid_max = fid_max + ((reg1fc & DUAL_PLANE_NB_FID_OFF_MASK ) >> DUAL_PLANE_NB_FID_SHIFT ); - } - /* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */ - fixPsNbVidBeforeWR(vid_max, coreid, dev, pvimode); - - /* fid setup is handled by the BSP at the end. */ - - } else { /* ! nb_cof_vid_update */ - /* Use max values */ - if (pvimode) - UpdateSinglePlaneNbVid(); - } - - return ((nb_cof_vid_update << 16) | (fid_max << 8)); - -} - -static void init_fidvid_ap(u32 apicid, u32 nodeid, u32 coreid) -{ - u32 send; - - printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid); - - send = init_fidvid_core(nodeid, coreid); - send |= (apicid << 24); // ap apicid - - // Send signal to BSP about this AP max fid - // This also indicates this AP is ready for warm reset (if required). - lapic_write(LAPIC_MSG_REG, send | F10_APSTATE_RESET); -} - -static u32 calc_common_fid(u32 fid_packed, u32 fid_packed_new) -{ - u32 fidmax; - u32 fidmax_new; - - fidmax = (fid_packed >> 8) & 0xFF; - - fidmax_new = (fid_packed_new >> 8) & 0xFF; - - if (fidmax > fidmax_new) { - fidmax = fidmax_new; - } - - fid_packed &= 0xFF << 16; - fid_packed |= (fidmax << 8); - fid_packed |= fid_packed_new & (0xFF << 16); // set nb_cof_vid_update - - return fid_packed; -} - -static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp) -{ - u32 readback = 0; - u32 timeout = 1; - - struct fidvid_st *fvp = gp; - int loop; - - print_debug_fv("Wait for AP stage 1: ap_apicid = ", ap_apicid); - - loop = 100000; - while (--loop > 0) { - if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback) != 0) - continue; - if (((readback & 0x3f) == F10_APSTATE_RESET) - || (is_fam15h() && ((readback & 0x3f) == F10_APSTATE_ASLEEP))) { - timeout = 0; - break; /* target ap is in stage 1 */ - } - } - - if (timeout) { - printk(BIOS_DEBUG, "%s: timed out reading from ap %02x\n", - __func__, ap_apicid); - return; - } - - print_debug_fv("\treadback = ", readback); - - fvp->common_fid = calc_common_fid(fvp->common_fid, readback); - - print_debug_fv("\tcommon_fid(packed) = ", fvp->common_fid); - -} - -static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode) -{ - msr_t msr; - u8 i; - u8 StartupPstate; - - /* BKDG 2.4.2.9.1 11-12 - * This function copies newNbVid to NbVid bits in P-state - * Registers[4:0] if its NbDid bit=0, and IddValue!=0 in case of - * NbVidUpdatedAll =0 or copies newNbVid to NbVid bits in - * P-state Registers[4:0] if its IddValue!=0 in case of - * NbVidUpdatedAll=1. Then transition to StartPstate. - */ - - /* write newNbVid to P-state Reg's NbVid if its NbDid=0 */ - for (i = 0; i < 5; i++) { - msr = rdmsr(PSTATE_0_MSR + i); - /* NbDid (bit 22 of P-state Reg) == 0 or NbVidUpdatedAll = 1 */ - if ( (msr.hi & PS_IDD_VALUE_MASK) - && (msr.hi & PS_EN_MASK) - &&(((msr.lo & PS_NB_DID_MASK) == 0) || NbVidUpdatedAll)) { - msr.lo &= PS_NB_VID_M_OFF; - msr.lo |= (newNbVid & 0x7F) << PS_NB_VID_SHFT; - wrmsr(PSTATE_0_MSR + i, msr); - } - } - - /* Not documented. Would overwrite Nb_Vids just copied - * should we just update cpu_vid or nothing at all ? - */ - if (pviMode) { //single plane - UpdateSinglePlaneNbVid(); - } - /* For each core in the system, transition all cores to StartupPstate */ - msr = rdmsr(MSR_COFVID_STS); - StartupPstate = msr.hi & 0x07; - - /* Set and wait for StartupPstate to set. */ - set_pstate(StartupPstate); - -} - -static void finalPstateChange(void) -{ - /* Enable P0 on all cores for best performance. - * Linux can slow them down later if need be. - * It is safe since they will be in C1 halt - * most of the time anyway. - */ - set_pstate(0); -} - -void init_fidvid_stage2(u32 apicid, u32 nodeid) -{ - msr_t msr; - pci_devfn_t dev; - u32 reg1fc; - u32 dtemp; - u32 nbvid; - u8 nb_cof_vid_update = needs_NB_COF_VID_update(); - u8 NbVidUpdateAll; - u8 pvimode; - - /* After warm reset finish the fid/vid setup for all cores. */ - - /* If any node has nb_cof_vid_update set all nodes need an update. */ - - dev = NODE_PCI(nodeid, 3); - if (is_fam15h()) - pvimode = 0; - else - pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1; - reg1fc = pci_read_config32(dev, 0x1FC); - nbvid = (reg1fc >> 7) & 0x7F; - NbVidUpdateAll = (reg1fc >> 1) & 1; - - if (nb_cof_vid_update) { - if (!pvimode) { /* SVI */ - nbvid = nbvid - ((reg1fc >> 17) & 0x1F); - } - /* write newNbVid to P-state Reg's NbVid if its NbDid=0 */ - fixPsNbVidAfterWR(nbvid, NbVidUpdateAll,pvimode); - } else { /* !nb_cof_vid_update */ - if (pvimode) - UpdateSinglePlaneNbVid(); - } - dtemp = pci_read_config32(dev, 0xA0); - dtemp &= PLLLOCK_OFF; - dtemp |= PLLLOCK_DFT_L; - pci_write_config32(dev, 0xA0, dtemp); - - dualPlaneOnly(dev); - applyBoostFIDOffset(dev, nodeid); - enableNbPState1(dev); - - finalPstateChange(); - - if (!is_fam15h()) { - /* Set TSC to tick at the P0 ndfid rate */ - msr = rdmsr(HWCR_MSR); - msr.lo |= 1 << 24; - wrmsr(HWCR_MSR, msr); - } -} - - -#if CONFIG(SET_FIDVID_STORE_AP_APICID_AT_FIRST) -struct ap_apicid_st { - u32 num; - // it could use 256 bytes for 64 node quad core system - u8 apicid[NODE_NUMS * 4]; -}; - -static void store_ap_apicid(unsigned int ap_apicid, void *gp) -{ - struct ap_apicid_st *p = gp; - - p->apicid[p->num++] = ap_apicid; - -} -#endif - - -int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) -{ -#if CONFIG(SET_FIDVID_STORE_AP_APICID_AT_FIRST) - struct ap_apicid_st ap_apicidx; - u32 i; -#endif - struct fidvid_st fv; - - printk(BIOS_DEBUG, "FIDVID on BSP, APIC_id: %02x\n", bsp_apicid); - - /* Steps 1-6 of BIOS NB COF and VID Configuration - * for SVI and Single-Plane PVI Systems. - */ - fv.common_fid = init_fidvid_core(0, 0); - - print_debug_fv("BSP fid = ", fv.common_fid); - -#if CONFIG(SET_FIDVID_STORE_AP_APICID_AT_FIRST) && \ - !CONFIG(SET_FIDVID_CORE0_ONLY) - /* For all APs (We know the APIC ID of all APs even when the APIC ID - is lifted) remote read from AP LAPIC_MSG_REG about max fid. - Then calculate the common max fid that can be used for all - APs and BSP */ - ap_apicidx.num = 0; - - for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE_RANGE, -1, store_ap_apicid, &ap_apicidx); - - for (i = 0; i < ap_apicidx.num; i++) { - init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv); - } -#else - for_each_ap(bsp_apicid, CONFIG(SET_FIDVID_CORE0_ONLY), -1, init_fidvid_bsp_stage1, &fv); -#endif - - print_debug_fv("common_fid = ", fv.common_fid); - - if (fv.common_fid & (1 << 16)) { /* check nb_cof_vid_update */ - - // Enable the common fid and other settings. - enable_fid_change((fv.common_fid >> 8) & 0x1F); - - // nbfid change need warm reset, so reset at first - return 1; - } - - return 0; // No FID/VID changes. Don't reset -} |