- Major update of the dynamic device tree so it can handle

  * subtractive resources
  * merging with the static device tree
  * more device types than just pci
- The piece to watch out for is the new enable_resources method that was needed in all of the drivers


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1096 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 12 insertions, 12 deletions

diff --git a/src/arch/i386/lib/pci_ops.c b/src/arch/i386/lib/pci_ops.c
index c3478ffa96..9a8616a90a 100644
--- a/src/arch/i386/lib/pci_ops.c
+++ b/src/arch/i386/lib/pci_ops.c
@@ -220,49 +220,49 @@ static const struct pci_ops *pci_check_direct(void)
 uint8_t pci_read_config8(device_t dev, unsigned where)
 {
 	uint8_t value;
-	value = conf->read8(dev->bus->secondary, dev->devfn, where);
+	value = conf->read8(dev->bus->secondary, dev->path.u.pci.devfn, where);
 	printk_spew("Read config 8 bus %d,devfn 0x%x,reg 0x%x,val 0x%x\n",
-		    dev->bus->secondary, dev->devfn, where, value);
+		    dev->bus->secondary, dev->path.u.pci.devfn, where, value);
 	return value;
 }
 
 uint16_t pci_read_config16(device_t dev, unsigned where)
 {
 	uint16_t value;
-	value = conf->read16(dev->bus->secondary, dev->devfn, where);
+	value = conf->read16(dev->bus->secondary, dev->path.u.pci.devfn, where);
 	printk_spew( "Read config 16 bus %d,devfn 0x%x,reg 0x%x,val 0x%x\n",
-		     dev->bus->secondary, dev->devfn, where, value);
+		     dev->bus->secondary, dev->path.u.pci.devfn, where, value);
 	return value;
 }
 
 uint32_t pci_read_config32(device_t dev, unsigned where)
 {
 	uint32_t value;
-	value = conf->read32(dev->bus->secondary, dev->devfn, where);
+	value = conf->read32(dev->bus->secondary, dev->path.u.pci.devfn, where);
 	printk_spew( "Read config 32 bus %d,devfn 0x%x,reg 0x%x,val 0x%x\n",
-		     dev->bus->secondary, dev->devfn, where, value);
+		     dev->bus->secondary, dev->path.u.pci.devfn, where, value);
 	return value;
 }
 
 void pci_write_config8(device_t dev, unsigned where, uint8_t val)
 {
 	printk_spew( "Write config 8 bus %d, devfn 0x%x, reg 0x%x, val 0x%x\n",
-		     dev->bus->secondary, dev->devfn, where, val);
-	conf->write8(dev->bus->secondary, dev->devfn, where, val);
+		     dev->bus->secondary, dev->path.u.pci.devfn, where, val);
+	conf->write8(dev->bus->secondary, dev->path.u.pci.devfn, where, val);
 }
 
 void pci_write_config16(device_t dev, unsigned where, uint16_t val)
 {
 	printk_spew( "Write config 16 bus %d, devfn 0x%x, reg 0x%x, val 0x%x\n",
-		     dev->bus->secondary, dev->devfn, where, val);
-	conf->write16(dev->bus->secondary, dev->devfn, where, val);
+		     dev->bus->secondary, dev->path.u.pci.devfn, where, val);
+	conf->write16(dev->bus->secondary, dev->path.u.pci.devfn, where, val);
 }
 
 void pci_write_config32(device_t dev, unsigned where, uint32_t val)
 {
 	printk_spew( "Write config 32 bus %d, devfn 0x%x, reg 0x%x, val 0x%x\n",
-		     dev->bus->secondary, dev->devfn, where, val);
-	conf->write32(dev->bus->secondary, dev->devfn, where, val);
+		     dev->bus->secondary, dev->path.u.pci.devfn, where, val);
+	conf->write32(dev->bus->secondary, dev->path.u.pci.devfn, where, val);
 }
 
 /** Set the method to be used for PCI, type I or type II