diff options
| author | Rob Barnes <robbarnes@google.com> | 2020-09-09 13:19:09 -0600 |
|---|---|---|
| committer | Aaron Durbin <adurbin@chromium.org> | 2020-09-10 20:26:03 +0000 |
| commit | b2545cc3c6388d0328ce24a81df104a6d069e952 (patch) | |
| tree | 91e6b81202dc65bd9958f785b5dbc6575258a62b /Documentation/soc | |
| parent | 3992da034f9f8a52df87202f7caa7056388f97d2 (diff) | |
soc/amd/picasso: Move APCB generation out of picasso
Move APCB generation out of the picasso makefile and into the mainboard
makefile. APCB generation tends to be mainboard specific and does not
belong in the soc makefile.
BUG=b:168099242
TEST=Build mandolin and check for APCB in coreboot binary
Build and boot ezkinil
Change-Id: Ib85ad94e515f2ffad58aafe06c1f1d4043e9303c
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45222
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'Documentation/soc')
| -rwxr-xr-x | Documentation/soc/amd/family17h.md | 41 |
1 files changed, 3 insertions, 38 deletions
diff --git a/Documentation/soc/amd/family17h.md b/Documentation/soc/amd/family17h.md index 23088cd12b..fffe25b023 100755 --- a/Documentation/soc/amd/family17h.md +++ b/Documentation/soc/amd/family17h.md @@ -240,47 +240,12 @@ in an Integration Guide. ## APCB setup APCBs are used to provide the PSP with SPD information and optionally a set of -GPIOs to use for selecting which SPD to load. - -### Prebuilt -The picasso `Makefile` expects APCBs to be located in -`3rdparty/blobs/mainboard/$(MAINBOARDDIR)`. If you have a pre-built binary just -add the following to your mainboard's Makefile. - -``` -# i.e., 3rdparty/blobs/mainboard/amd/mandolin/APCB_mandolin.bin -APCB_SOURCES = mandolin -``` +GPIOs to use for selecting which SPD to load. A list of APCB files should be +specified in `APCB_SOURCES`. ### Generating APCBs If you have a template APCB file, the `apcb_edit` tool can be used to inject the -SPD and GPIOs used to select the correct slot. Entries should match this -pattern `{NAME}_x{1,2}`. There should be a matching SPD hex file in -`SPD_SOURCES_DIR` matching the pattern `{NAME}.spd.hex`. -The `_x{1,2}` suffix denotes single or dual channel. Up to 16 slots can be used. -If a slot is empty, the special empty keyword can be used. This will generate -an APCB with an empty SPD. - -``` -APCB_SOURCES = hynix-HMA851S6CJR6N-VK_x1 # 0b0000 -APCB_SOURCES += hynix-HMAA1GS6CMR6N-VK_x2 # 0b0001 -APCB_SOURCES += empty # 0b0010 -APCB_SOURCES += samsung-K4A8G165WC-BCWE_x1 # 0b0011 -``` - -#### APCB Board ID GPIO configuration. -The GPIOs determine which memory SPD will be used during boot. -``` -# APCB_BOARD_ID_GPIO[0-3] = GPIO_NUMBER GPIO_IO_MUX GPIO_BANK_CTL -# GPIO_NUMBER: FCH GPIO number -# GPIO_IO_MUX: Value write to IOMUX to configure this GPIO -# GPIO_BANK_CTL: Value write to GPIOBankCtl[23:16] to configure this GPIO - -APCB_BOARD_ID_GPIO0 = 121 1 0 -APCB_BOARD_ID_GPIO1 = 120 1 0 -APCB_BOARD_ID_GPIO2 = 131 3 0 -APCB_BOARD_ID_GPIO3 = 116 1 0 -``` +SPD and GPIOs used to select the correct slot. ## Footnotes |