Documentation/Intel: Adjust heading levels

Adjust the headings so that there is only one h1 tag per file.

Change-Id: I53f9ee47957fcde521b64c0123dac10f051c681c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>

7 files changed, 72 insertions, 70 deletions

diff --git a/Documentation/Intel/Board/board.html b/Documentation/Intel/Board/board.html
index d09805bddd..4ba51df401 100644
--- a/Documentation/Intel/Board/board.html
+++ b/Documentation/Intel/Board/board.html
@@ -22,7 +22,7 @@
 
 
 <hr>
-<h1><a name="RequiredFiles">Required Files</a></h1>
+<h2><a name="RequiredFiles">Required Files</a></h2>
 <p>
   Create the board directory as src/mainboard/&lt;Vendor&gt;/&lt;Board&gt;.
 </p>
@@ -80,7 +80,7 @@
 
 
 <hr>
-<h1><a name="SerialOutput">Enable Serial Output</a></h1>
+<h2><a name="SerialOutput">Enable Serial Output</a></h2>
 <p>
   Use the following steps to enable serial output:
 </p>
@@ -103,7 +103,7 @@
 
 
 <hr>
-<h1><a name="SpdData">Memory Timing Data</a></h1>
+<h2><a name="SpdData">Memory Timing Data</a></h2>
 <p>
   Memory timing data is located in the flash.  This data is in the format of
   <a target="_blank" href="https://en.wikipedia.org/wiki/Serial_presence_detect">serial presence detect</a>
@@ -183,7 +183,7 @@
 
 
 <hr>
-<h1><a name="DisablePciDevices">Disable PCI Devices</a></h1>
+<h2><a name="DisablePciDevices">Disable PCI Devices</a></h2>
 <p>
   Ramstage's BS_DEV_ENUMERATE state displays the PCI vendor and device IDs for all
   of the devices in the system.  Edit the devicetree.cb file:
@@ -209,7 +209,7 @@
 
 
 <hr>
-<h1><a name="AcpiTables">ACPI Tables</a></h1>
+<h2><a name="AcpiTables">ACPI Tables</a></h2>
 <ol>
   <li>Edit Kconfig
     <ol type="A">
diff --git a/Documentation/Intel/Board/galileo.html b/Documentation/Intel/Board/galileo.html
index cdc8fda85f..cd0a28ac35 100644
--- a/Documentation/Intel/Board/galileo.html
+++ b/Documentation/Intel/Board/galileo.html
@@ -26,7 +26,7 @@
 
 
 <hr>
-<h1>Galileo Board Documentation</h1>
+<h2>Galileo Board Documentation</h2>
 <ul>
   <li>Common Components
     <ul>
@@ -46,7 +46,7 @@
   <li>Make a bootable <a target="_blank" href="https://software.intel.com/en-us/get-started-galileo-linux-step1">micro SD card</a></li>
 </ul>
 
-<h2>Galileo Gen 2 Board Documentation</h2>
+<h3>Galileo Gen 2 Board Documentation</h3>
 <ul>
   <li><a target="_blank" href="http://files.linuxgizmos.com/intel_galileo_gen2_blockdiagram.jpg">Block Diagram</a></li>
   <li><a target="_blank" href="https://software.intel.com/en-us/iot/library/galileo-getting-started">Getting Started</a></li>
@@ -70,7 +70,7 @@
   </li>
 </ul>
 
-<h2>Galileo Gen 1 Board Documentation</h2>
+<h3>Galileo Gen 1 Board Documentation</h3>
 <ul>
   <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/galileo-g1-datasheet.pdf">Datasheet</a></li>
   <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/guides/galileo-g1-schematic.pdf">Schematic</a></li>
@@ -89,7 +89,7 @@
 
 
 <hr>
-<h1>Debug Tools</h1>
+<h2>Debug Tools</h2>
 <ul>
   <li>Flash Programmer:
     <ul>
diff --git a/Documentation/Intel/SoC/quark.html b/Documentation/Intel/SoC/quark.html
index 9c180daf41..c3eead2e33 100644
--- a/Documentation/Intel/SoC/quark.html
+++ b/Documentation/Intel/SoC/quark.html
@@ -28,7 +28,7 @@
 
 
 <hr>
-<h1>Quark&trade; Documentation</h1>
+<h2>Quark&trade; Documentation</h2>
 <ul>
   <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png">Block Diagram</a></li>
   <li><a target="_blank" href="http://www.intel.com/content/www/us/en/embedded/products/quark/specifications.html">Specifications</a>:
@@ -49,7 +49,7 @@
 
 
 <hr>
-<h1><a name="CorebootPayloadPkg">Quark&trade; EDK2 CorebootPayloadPkg</a></h1>
+<h2><a name="CorebootPayloadPkg">Quark&trade; EDK2 CorebootPayloadPkg</a></h2>
 <p>
 Build Instructions:
 </p>
@@ -81,7 +81,7 @@ dir Build\CorebootPayloadPkgIA32\DEBUG_VS2015x86\FV\UEFIPAYLOAD.fd
 
 
 <hr>
-<h1><a name="BuildEnvironment">Quark&trade; EDK2 Build Environment</a></h1>
+<h2><a name="BuildEnvironment">Quark&trade; EDK2 Build Environment</a></h2>
 <p>
   Use the following steps to setup a build environment:
 </p>
@@ -118,7 +118,7 @@ edksetup.bat
 
 
 <hr>
-<h1><a name="QuarkFsp">Quark&trade; FSP</a></h1>
+<h2><a name="QuarkFsp">Quark&trade; FSP</a></h2>
 <p>
 Getting the Quark FSP source:
 </p>
@@ -130,7 +130,7 @@ Getting the Quark FSP source:
   <li>Use git to clone <a target="_blank" href="https://review.gerrithub.io/#/admin/projects/LeeLeahy/quarkfsp">QuarkFspPkg</a> into the QuarkFpsPkg directory (.)</li>
 </ol>
 
-<h2>Building QuarkFspPkg</h2>
+<h3>Building QuarkFspPkg</h3>
 <p>
 There are two versions of FSP: FSP 1.1 and FSP 2.0.  There are also two
 different implementations of FSP, one using subroutines without SEC and
@@ -157,7 +157,7 @@ Build commands shown building debug FSP:
   </li>
 </ul>
 
-<h2>Copying FSP files into coreboot Source Tree</h2>
+<h3>Copying FSP files into coreboot Source Tree</h3>
 <p>
 There are some helper scripts to copy the FSP output into the coreboot
 source tree.  The parameters to these scripts are:
@@ -182,7 +182,7 @@ Script files:
 
 
 <hr>
-<h1>Quark&trade; EDK2 BIOS</h1>
+<h2>Quark&trade; EDK2 BIOS</h2>
 <p>
 Build Instructions:
 </p>
diff --git a/Documentation/Intel/SoC/soc.html b/Documentation/Intel/SoC/soc.html
index 147b0a1a8e..d91166fd2c 100644
--- a/Documentation/Intel/SoC/soc.html
+++ b/Documentation/Intel/SoC/soc.html
@@ -39,7 +39,7 @@
 
 
 <hr>
-<h1><a name="RequiredFiles">Required Files</a></h1>
+<h2><a name="RequiredFiles">Required Files</a></h2>
 <p>
   Create the directory as src/soc/&lt;Vendor&gt;/&lt;Chip Family&gt;.
 </p>
@@ -69,13 +69,13 @@
 
 
 <hr>
-<h1><a name="Descriptor">Start Booting</a></h1>
+<h2><a name="Descriptor">Start Booting</a></h2>
 <p>
   Some SoC parts require additional firmware components in the flash.
   This section describes how to add those pieces.
 </p>
 
-<h2>Intel Firmware Descriptor</h2>
+<h3>Intel Firmware Descriptor</h3>
 <p>
   The Intel Firmware Descriptor (IFD) is located at the base of the flash part.
   The following command overwrites the base of the flash image with the Intel
@@ -84,7 +84,7 @@
 <pre><code>dd if=descriptor.bin of=build/coreboot.rom conv=notrunc >/dev/null 2>&1</code></pre>
 
 
-<h2><a name="MEB">Management Engine Binary</a></h2>
+<h3><a name="MEB">Management Engine Binary</a></h3>
 <p>
   Some SoC parts contain and require that the Management Engine (ME) be running
   before it is possible to bring the x86 processor out of reset.  A binary file
@@ -96,14 +96,14 @@ mv build/coreboot.rom.new build/coreboot.rom
 </code></pre>
 
 
-<h2><a name="EarlyDebug">Early Debug</a></h2>
+<h3><a name="EarlyDebug">Early Debug</a></h3>
 <p>
   Early debugging between the reset vector and the time the serial port is enabled
   is most easily done by writing values to port 0x80.
 </p>
 
 
-<h2>Success</h2>
+<h3>Success</h3>
 <p>
   When the reset vector is successfully invoked, port 0x80 will output the following value:
 </p>
@@ -118,7 +118,7 @@ mv build/coreboot.rom.new build/coreboot.rom
 
 
 <hr>
-<h1><a name="Bootblock">Bootblock</a></h1>
+<h2><a name="Bootblock">Bootblock</a></h2>
 <p>
   Implement the bootblock using the following steps:
 </p>
@@ -213,7 +213,7 @@ mv build/coreboot.rom.new build/coreboot.rom
 
 
 <hr>
-<h1><a name="TempRamInit">TempRamInit</a></h1>
+<h2><a name="TempRamInit">TempRamInit</a></h2>
 <p>
   Enable the call to TempRamInit in two stages:
 </p>
@@ -223,7 +223,7 @@ mv build/coreboot.rom.new build/coreboot.rom
 </ol>
 
 
-<h2>Find FSP Binary</h2>
+<h3>Find FSP Binary</h3>
 <p>
 Use the following steps to locate the FSP binary:
 </p>
@@ -267,7 +267,7 @@ Use the following steps to locate the FSP binary:
 </ol>
 
 
-<h2>Calling TempRamInit</h2>
+<h3>Calling TempRamInit</h3>
 <p>
 Use the following steps to debug the call to TempRamInit:
 </p>
@@ -301,9 +301,9 @@ Use the following steps to debug the call to TempRamInit:
 
 
 <hr>
-<h1><a name="Romstage">Romstage</a></h1>
+<h2><a name="Romstage">Romstage</a></h2>
 
-<h2><a name="SerialOutput">Serial Output</a></h2>
+<h3><a name="SerialOutput">Serial Output</a></h3>
 <p>
   The following steps add the serial output support for romstage:
 </p>
@@ -339,7 +339,7 @@ Use the following steps to debug the call to TempRamInit:
 </ol>
 
 
-<h2><a name="PreviousSleepState">Determine Previous Sleep State</a></h2>
+<h3><a name="PreviousSleepState">Determine Previous Sleep State</a></h3>
 <p>
   The following steps implement the code to get the previous sleep state:
 </p>
@@ -362,7 +362,7 @@ Use the following steps to debug the call to TempRamInit:
 </ol>
 
 
-<h2><a name="MemoryInit">MemoryInit Support</a></h2>
+<h3><a name="MemoryInit">MemoryInit Support</a></h3>
 <p>
   The following steps implement the code to support the FSP MemoryInit call:
 </p>
@@ -390,7 +390,7 @@ Use the following steps to debug the call to TempRamInit:
 </ol>
 
 
-<h2><a name="DisableShadowRom">Disable Shadow ROM</a></h2>
+<h3><a name="DisableShadowRom">Disable Shadow ROM</a></h3>
 <p>
   A shadow of the SPI flash part is mapped from 0x000e0000 to 0x000fffff.
   This shadow needs to be disabled to allow RAM to properly respond to
@@ -402,9 +402,9 @@ Use the following steps to debug the call to TempRamInit:
 
 
 <hr>
-<h1><a name="Ramstage">Ramstage</a></h1>
+<h2><a name="Ramstage">Ramstage</a></h2>
 
-<h2><a name="DeviceTree">Start Device Tree Processing</a></h2>
+<h3><a name="DeviceTree">Start Device Tree Processing</a></h3>
 <p>
   The src/mainboard/&lt;Vendor&gt;/&lt;Board&gt;/devicetree.cb file drives the
   execution during ramstage.  This file is processed by the util/sconfig utility
@@ -417,7 +417,7 @@ Use the following steps to debug the call to TempRamInit:
   state of the state machine.
 </p>
 
-<h3><a name="ChipOperations">Chip Operations</a></h3>
+<h4><a name="ChipOperations">Chip Operations</a></h4>
 <p>
   Kick-starting the ramstage state machine requires creating the operation table
   for the chip listed in devicetree.cb:
@@ -437,7 +437,7 @@ Use the following steps to debug the call to TempRamInit:
   <li>Edit src/soc/&lt;SoC Vendor&gt;/&lt;SoC Family&gt;/Makefile.inc and add chip.c to ramstage</li>
 </ol>
 
-<h3>Domain Operations</h3>
+<h4>Domain Operations</h4>
 <p>
   coreboot uses the domain operation table to initiate operations on all of the
   devices in the domain.  By default coreboot enables all PCI devices which it
@@ -482,7 +482,7 @@ Use the following steps to debug the call to TempRamInit:
 </ol>
 
 
-<h2><a name="DeviceDrivers">PCI Device Drivers</a></h2>
+<h3><a name="DeviceDrivers">PCI Device Drivers</a></h3>
 <p>
   PCI device drivers consist of a ".c" file which contains a "pci_driver" data
   structure at the end of the file with the attribute tag "__pci_driver".  This
@@ -509,7 +509,7 @@ Use the following steps to debug the call to TempRamInit:
   </li>
 </ol>
 
-<h3><a name="SubsystemIds">Subsystem IDs</a></h3>
+<h4><a name="SubsystemIds">Subsystem IDs</a></h4>
 <p>
   PCI subsystem IDs are assigned during the BS_DEV_ENABLE state.  The device
   driver may use the common mechanism to assign subsystem IDs by adding
@@ -534,7 +534,7 @@ Use the following steps to debug the call to TempRamInit:
 
 
 
-<h2>Set up the <a name="MemoryMap">Memory Map</a></h2>
+<h3>Set up the <a name="MemoryMap">Memory Map</a></h3>
 <p>
   The memory map is built by the various PCI device drivers during the
   BS_DEV_RESOURCES state of ramstage.  The northcluster driver will typically
@@ -571,12 +571,12 @@ Use the following steps to debug the call to TempRamInit:
 
 
 <hr>
-<h1><a name="AcpiTables">ACPI Tables</a></h1>
+<h2><a name="AcpiTables">ACPI Tables</a></h2>
 <p>
   One of the payloads that needs ACPI tables is the EDK2 <a target="_blank" href="quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a>.
 </p>
 
-<h2>FADT</h2>
+<h3>FADT</h3>
 <p>
   The EDK2 module
   CorebootModulePkg/Library/CbParseLib/<a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootModulePkg/Library/CbParseLib/CbParseLib.c#l450">CbParseLib.c</a>
@@ -679,7 +679,7 @@ Use the following steps to debug the call to TempRamInit:
 
 
 <hr>
-<h1><a name="LegacyHardware">Legacy Hardware</a></h1>
+<h2><a name="LegacyHardware">Legacy Hardware</a></h2>
 <p>
   One of the payloads that needs legacy hardare is the EDK2 <a target="_blank" href="quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a>.
 </p>
@@ -731,4 +731,4 @@ Use the following steps to debug the call to TempRamInit:
 <hr>
 <p>Modified: 4 March 2016</p>
   </body>
-</html>
\ No newline at end of file
+</html>
diff --git a/Documentation/Intel/fsp1_1.html b/Documentation/Intel/fsp1_1.html
index 1e1e88fcb3..94cb6bf8be 100644
--- a/Documentation/Intel/fsp1_1.html
+++ b/Documentation/Intel/fsp1_1.html
@@ -5,7 +5,9 @@
   </head>
   <body>
 
-<h1>x86 FSP 1.1 Integration</h1>
+<h1>FSP 1.1</h1>
+
+<h2>x86 FSP 1.1 Integration</h2>
 <p>
   Firmware Support Package (FSP) integration requires System-on-a-Chip (SoC)
   and board support.  The combined steps are listed
@@ -26,8 +28,8 @@
 </ul>
 
 <hr>
-<h1><a name="RequiredFiles">Required Files</a></h1>
-<h2><a name="corebootRequiredFiles">coreboot Required Files</a></h2>
+<h2><a name="RequiredFiles">Required Files</a></h2>
+<h3><a name="corebootRequiredFiles">coreboot Required Files</a></h3>
 <ol>
   <li>Create the following directories if they do not already exist:
     <ul>
@@ -47,7 +49,7 @@
 
 
 <hr>
-<h1><a name="FspBinary">Add the FSP Binary File to coreboot File System</a></h1>
+<h2><a name="FspBinary">Add the FSP Binary File to coreboot File System</a></h2>
 <p>
   Add the FSP binary to the coreboot flash image using the following command:
 </p>
@@ -59,7 +61,7 @@
 
 
 <hr>
-<h1><a name="corebootFspDebugging">Enable coreboot/FSP Debugging</a></h1>
+<h2><a name="corebootFspDebugging">Enable coreboot/FSP Debugging</a></h2>
 <p>
   Set the following Kconfig values:
 </p>
diff --git a/Documentation/Intel/index.html b/Documentation/Intel/index.html
index b2e826d590..b4daa960a9 100644
--- a/Documentation/Intel/index.html
+++ b/Documentation/Intel/index.html
@@ -5,15 +5,15 @@
   </head>
   <body>
 
-<h1>Intel&reg; x86 Boards</h1>
+<h1>Intel&reg; x86</h1>
+
+<h2>Intel&reg; x86 Boards</h2>
 <ul>
   <li><a target="_blank" href="Board/galileo.html">Galileo</a></li>
   <li><a target="_blank" href="http://wiki.minnowboard.org/Coreboot">MinnowBoard MAX</a></li>
 </ul>
 
-
-
-<h1>Intel&reg; x86 SoCs</h1>
+<h2>Intel&reg; x86 SoCs</h2>
 <ul>
   <li><a target="_blank" href="SoC/quark.html">Quark&trade;</a></li>
 </ul>
@@ -21,7 +21,7 @@
 
 
 <hr>
-<h1>x86 coreboot Development</h1>
+<h2>x86 coreboot Development</h2>
 <ul>
   <li>Get the <a target="_blank" href="https://www.coreboot.org/Git">coreboot source</li>
   <li><a target="_blank" href="development.html">Overall</a> development</li>
@@ -35,7 +35,7 @@
 
 
 <hr>
-<h1>Payload Development</h1>
+<h2>Payload Development</h2>
 <ul>
   <li><a target="_blank" href="SoC/quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a>
     <ul>
@@ -50,13 +50,13 @@
 
 
 <hr>
-<h1><a name="Documentation">Documentation</a></h1>
+<h2><a name="Documentation">Documentation</a></h2>
 <ul>
   <li>Intel&reg; 64 and IA-32 Architectures <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf">Software Developer Manual</a></li>
   <li><a target="_blank" href="http://www.uefi.org/specifications">UEFI Specifications</a></li>
 </ul>
 
-<h2><a name="Edk2Documentation">EDK-II Documentation</a></h2>
+<h3><a name="Edk2Documentation">EDK-II Documentation</a></h3>
 <ul>
   <li>Build <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/Build_Spec_1_26.pdf">V1.26</a></li>
   <li>Coding Standards <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/CCS_2_1_Draft.pdf">V2.1</a></li>
@@ -71,14 +71,14 @@
   <li>VRF <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/VFR_1_9.pdf">V1.9</a></li>
 </ul>
 
-<h2><a name="FspDocumentation">FSP Documentation</a></h2>
+<h3><a name="FspDocumentation">FSP Documentation</a></h3>
 <ul>
   <li>Intel&reg; Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v2.pdf">V2.0</a></li>
   <li>Intel&reg; Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v1-1.pdf">V1.1</a></li>
   <li>Intel&reg; Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec.pdf">V1.0</a></li>
 </ul>
 
-<h2><a name="FeatureDocumentation">Feature Documentation</a></h2>
+<h3><a name="FeatureDocumentation">Feature Documentation</a></h3>
 <table border="1">
   <tr bgcolor="#c0ffc0"><th>Feature/Specification</th><th>Linux View/Test</th><th>EDK-II View/Test</th></tr>
   <tr>
diff --git a/Documentation/Intel/vboot.html b/Documentation/Intel/vboot.html
index 3a92989317..ca49ac2e2d 100644
--- a/Documentation/Intel/vboot.html
+++ b/Documentation/Intel/vboot.html
@@ -24,7 +24,7 @@ Google's vboot verifies the firmware and places measurements
 within the TPM.
 
 <hr>
-<h1>Root of Trust</h1>
+<h2>Root of Trust</h2>
 <p>
 When using vboot, the root-of-trust is basically the read-only portion of the
 SPI flash.  The following items factor into the trust equation:
@@ -57,7 +57,7 @@ flash maintains the manufactured state during the system's lifetime.
 </p>
 
 <hr>
-<h1>Firmware Layout</h1>
+<h2>Firmware Layout</h2>
 <p>
 Several sections are added to the firmware layout to support vboot:
 </p>
@@ -71,7 +71,7 @@ Several sections are added to the firmware layout to support vboot:
 The following sections describe the various portions of the flash layout.
 </p>
 
-<h2>Read-Only Section</h2>
+<h3>Read-Only Section</h3>
 <p>
 The read-only section contains a coreboot file system (CBFS) that contains all
 of the boot firmware necessary to perform recovery for the system. This
@@ -87,14 +87,14 @@ size and must cover the entire read-only section which consists of:
   <li>coreboot file system containing read-only recovery firmware</li>
 </ul>
 
-<h2>Google Binary Blob (GBB) Area</h2>
+<h3>Google Binary Blob (GBB) Area</h3>
 <p>
 The GBB area is part of the read-only section.  This area contains a 4096 or
 8192 bit public root RSA key that is used to verify the VBLOCK area to obtain
 the firmware signing key.
 </p>
 
-<h2>Recovery Firmware</h2>
+<h3>Recovery Firmware</h3>
 <p>
 The recovery firmware is contained within a coreboot file system and consists
 of:
@@ -129,7 +129,7 @@ SPI flash device to boot the system.
 </p>
 
 
-<h2>Read/Write Section</h2>
+<h3>Read/Write Section</h3>
 
 <p>
 The read/write sections contain an area which contains the firmware signing
@@ -158,7 +158,7 @@ These files also produce the tables which get passed to the operating system.
 </p>
 
 <hr>
-<h1>Firmware Updates</h1>
+<h2>Firmware Updates</h2>
 <p>
 The read/write sections exist in one of three states:
 </p>
@@ -208,7 +208,7 @@ gets corrupted.
 </p>
 
 <hr>
-<h1>Build Flags</h1>
+<h2>Build Flags</h2>
 <p>
 The following Kconfig values need to be selected to enable vboot:
 </p>
@@ -255,7 +255,7 @@ systems in FW_MAIN_A and FW_MAIN_B.
 </p>
 
 <hr>
-<h1>Signing the coreboot Image</h1>
+<h2>Signing the coreboot Image</h2>
 <p>
 The following command script is an example of how to sign the coreboot image file.
 This script is used on the Intel Galileo board and creates the GBB area and
@@ -341,7 +341,7 @@ gbb_utility                          \
 </code></pre>
 
 <hr>
-<h1>Boot Flow</h1>
+<h2>Boot Flow</h2>
 <p>
 The reset vector exist in the read-only area and points to the bootblock entry
 point.  The only copy of the bootblock exists in the read-only area of the SPI
@@ -367,7 +367,7 @@ not valid vboot falls back to the read-only area to boot into system recovery.
 </p>
 
 <hr>
-<h1>Chromebook Special Features</h1>
+<h2>Chromebook Special Features</h2>
 <p>
 Google's Chromebooks have some special features:
 </p>
@@ -376,7 +376,7 @@ Google's Chromebooks have some special features:
   <li>Write-protect screw</li>
 </ul>
 
-<h2>Developer Mode</h2>
+<h3>Developer Mode</h3>
 <p>
 Developer mode allows the user to use coreboot to boot another operating system.
 This may be a another (beta) version of Chrome OS, or another flavor of
@@ -386,7 +386,7 @@ This prevents someone from entering developer mode to subvert the system
 security to access files on the local system or cloud.
 </p>
 
-<h2>Write Protect Screw</h2>
+<h3>Write Protect Screw</h3>
 <p>
 Chromebooks have a write-protect screw which provides the ground to the
 write-protect pin of the SPI flash.  Google specifically did this to allow