diff options
| author | Sean Rhodes <sean@starlabs.systems> | 2022-05-06 13:18:44 +0100 |
|---|---|---|
| committer | Martin L Roth <gaumless@tutanota.com> | 2022-05-28 03:43:04 +0000 |
| commit | ff16e41b75cc8af83b51df3e7e35865f864a84df (patch) | |
| tree | cc3face82677cc2995ad1df46f31c2f05251d18b | |
| parent | 59609784f0fc36296fc198228b912e7609c8a3e9 (diff) | |
mb/starlabs/lite/glk: Correct OverCurrent Pin
The OC pin was set to 0, which isn't connected. All USB ports are
connected to OC1.
This solves a strange issue where the Lite can't be powered on without
the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I700ddde291f0e4be6e3787e2da13f6d3ece736b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
| -rw-r--r-- | src/mainboard/starlabs/lite/variants/glk/devicetree.cb | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/src/mainboard/starlabs/lite/variants/glk/devicetree.cb b/src/mainboard/starlabs/lite/variants/glk/devicetree.cb index 884bf7ed54..44f88effb3 100644 --- a/src/mainboard/starlabs/lite/variants/glk/devicetree.cb +++ b/src/mainboard/starlabs/lite/variants/glk/devicetree.cb @@ -88,23 +88,23 @@ chip soc/intel/apollolake device pci 15.0 on # XHCI ### USB 2.0 Devices # Motherboard USB Type C - register "usb2_port[0]" = "PORT_EN(OC0)" + register "usb2_port[0]" = "PORT_EN(OC_SKIP)" # Motherboard USB 3.0 - register "usb2_port[3]" = "PORT_EN(OC0)" + register "usb2_port[3]" = "PORT_EN(OC1)" # Internal Webcam - register "usb2_port[4]" = "PORT_EN(OC0)" + register "usb2_port[4]" = "PORT_EN(OC_SKIP)" # Daughterboard USB 3.0 - register "usb2_port[5]" = "PORT_EN(OC0)" + register "usb2_port[5]" = "PORT_EN(OC_SKIP)" # Daughterboard SD Card - register "usb2_port[6]" = "PORT_EN(OC0)" + register "usb2_port[6]" = "PORT_EN(OC_SKIP)" ### USB 3.0 Devices # Motherboard USB 3.0 - register "usb3_port[0]" = "PORT_EN(OC0)" + register "usb3_port[0]" = "PORT_EN(OC1)" # Motherboard USB Type C - register "usb3_port[1]" = "PORT_EN(OC0)" + register "usb3_port[1]" = "PORT_EN(OC_SKIP)" # Daughterboard USB 3.0 - register "usb3_port[2]" = "PORT_EN(OC0)" + register "usb3_port[2]" = "PORT_EN(OC_SKIP)" end device pci 15.1 off end # XDCI device pci 16.0 off end # I2C0 |