Add support for the MSI K9ND Master Series (ms9282) board.

Signed-off-by: Bingxun Shi <bingxunshi@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2552 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

13 files changed, 2192 insertions, 0 deletions

diff --git a/src/mainboard/msi/ms9282/Config.lb b/src/mainboard/msi/ms9282/Config.lb
new file mode 100644
index 0000000000..54d85e75e1
--- /dev/null
+++ b/src/mainboard/msi/ms9282/Config.lb
@@ -0,0 +1,418 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2006 AMD
+## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
+##
+## Copyright (C) 2006 MSI
+## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+       default ROM_SECTION_SIZE   = FALLBACK_SIZE
+       default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+       default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+       default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_PAYLOAD     = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+arch i386 end
+
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+#dir /drivers/ati/ragexl
+#needed by irq_tables and mptable and acpi_tables
+object get_bus_conf.o
+
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+
+if USE_DCACHE_RAM
+
+if CONFIG_USE_INIT
+
+makerule ./auto.o
+        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+        action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
+end
+
+else
+
+makerule ./auto.inc
+        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+        action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+       action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+       action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+end
+
+end
+else
+
+##
+## Romcc output
+##
+makerule ./failover.E
+        depends "$(MAINBOARD)/failover.c ./romcc"
+        action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+        depends "$(MAINBOARD)/failover.c ./romcc"
+        action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E
+        depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+        action  "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+        depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+        action  "./romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+if USE_FALLBACK_IMAGE
+        mainboardinit cpu/x86/16bit/entry16.inc
+        ldscript /cpu/x86/16bit/entry16.lds
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+
+if USE_DCACHE_RAM
+       if CONFIG_USE_INIT
+               ldscript /cpu/x86/32bit/entry32.lds
+       end
+
+       if CONFIG_USE_INIT
+               ldscript      /cpu/amd/car/cache_as_ram.lds
+       end
+end
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE
+       mainboardinit cpu/x86/16bit/reset16.inc
+       ldscript /cpu/x86/16bit/reset16.lds
+else
+       mainboardinit cpu/x86/32bit/reset32.inc
+       ldscript /cpu/x86/32bit/reset32.lds
+end
+
+if USE_DCACHE_RAM
+else
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit southbridge/nvidia/mcp55/id.inc
+ldscript /southbridge/nvidia/mcp55/id.lds
+
+##
+## ROMSTRAP table for MCP55
+##
+if USE_FALLBACK_IMAGE
+       mainboardinit southbridge/nvidia/mcp55/romstrap.inc
+       ldscript /southbridge/nvidia/mcp55/romstrap.lds
+end
+
+if USE_DCACHE_RAM
+##
+## Setup Cache-As-Ram
+##
+mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+if USE_DCACHE_RAM
+       ldscript /arch/i386/lib/failover.lds
+else
+       ldscript /arch/i386/lib/failover.lds
+       mainboardinit ./failover.inc
+end
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+if CONFIG_USE_INIT
+initobject auto.o
+else
+mainboardinit ./auto.inc
+end
+
+else
+# ROMCC
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+        config chip.h
+end
+
+
+# sample config for msi/ms9282
+chip northbridge/amd/amdk8/root_complex
+        device apic_cluster 0 on
+                chip cpu/amd/socket_F
+                        device apic 0 on end
+                end
+        end
+
+       device pci_domain 0 on
+               chip northbridge/amd/amdk8 #mc0
+                       device pci 18.0 on #  northbridge
+                               #  devices on link 0, link 0 == LDT 0
+                               chip southbridge/nvidia/mcp55
+                                       device pci 0.0 on end   # HT
+                                       device pci 1.0 on # LPC
+                                               chip superio/winbond/w83627ehg
+                                                       device pnp 2e.0 on #  Floppy
+                                                               io 0x60 = 0x3f0
+                                                               irq 0x70 = 6
+                                                               drq 0x74 = 2
+                                                       end
+                                                       device pnp 2e.1 off #  Parallel Port
+                                                               io 0x60 = 0x378
+                                                               irq 0x70 = 7
+                                                       end
+                                                       device pnp 2e.2 on #  Com1
+                                                               io 0x60 = 0x3f8
+                                                               irq 0x70 = 4
+                                                       end
+                                                       device pnp 2e.3 off #  Com2
+                                                               io 0x60 = 0x2f8
+                                                               irq 0x70 = 3
+                                                       end
+                                                       device pnp 2e.5 on #  Keyboard
+                                                               io 0x60 = 0x60
+                                                               io 0x62 = 0x64
+                                                               irq 0x70 = 1
+                                                               irq 0x72 = 12
+                                                       end
+                                                       device pnp 2e.6 off #  SERIAL_FALSH
+                                                               io 0x60 = 0x100
+                                                       end
+                                                       device pnp 2e.7 off #  GAME_MIDI_GIPO1
+                                                               io 0x60 = 0x220
+                                                               io 0x62 = 0x300
+                                                               irq 0x70 = 9
+                                                       end
+                                                       device pnp 2e.8 off end #  WDTO_PLED
+                                                       device pnp 2e.9 off end #  GPIO2_GPIO3_GPIO4_GPIO5
+                                                       device pnp 2e.a off end #  ACPI
+                                                       device pnp 2e.b on #  HW Monitor
+                                                               io 0x60 = 0x290
+                                                               irq 0x70 = 5
+                                                       end
+                                               end
+                                       end
+                                        device pci 1.1 on # SM 0
+                                               chip drivers/i2c/i2cmux2 # pca9554 smbus mux
+                                                       device i2c 70 on  #0 pca9554 1
+                                                               chip drivers/generic/generic #dimm 0-0-0
+                                                                        device i2c 50 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-0-1
+                                                                        device i2c 51 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-0
+                                                                        device i2c 52 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-1
+                                                                        device i2c 53 on end
+                                                                end
+                                                               chip drivers/generic/generic #dimm 0-0-0
+                                                                        device i2c 54 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-0-1
+                                                                        device i2c 55 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-0
+                                                                        device i2c 56 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-1
+                                                                        device i2c 57 on end
+                                                                end
+                                                       end
+                                                       device i2c 70 on  #0 pca9554 2
+                                                               chip drivers/generic/generic #dimm 0-0-0
+                                                                        device i2c 50 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-0-1
+                                                                        device i2c 51 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-0
+                                                                        device i2c 52 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-1
+                                                                        device i2c 53 on end
+                                                                end
+                                                               chip drivers/generic/generic #dimm 0-0-0
+                                                                        device i2c 54 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-0-1
+                                                                        device i2c 55 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-0
+                                                                        device i2c 56 on end
+                                                                end
+                                                                chip drivers/generic/generic #dimm 0-1-1
+                                                                        device i2c 57 on end
+                                                                end
+                                                       end
+                                               end
+                                       end
+                                       device pci 1.1 on # SM 1
+                                               chip drivers/i2c/i2cmux2 # pca9554 smbus mux
+                                                       device i2c 72 on     #pca9554 channle1
+                                                               chip drivers/i2c/adm1027   #HWM ADT7476 1
+                                                                       device i2c 2e on end
+                                                               end
+                                                       end
+                                                       device i2c 72 on     #pca9545 channel 2
+                                                               chip drivers/i2c/adm1027   #HWM ADT7463
+                                                                       device i2c 2e on end
+                                                               end
+                                                       end
+                                                       device i2c 72 on end  #pca9545 channel 3
+                                                       device i2c 72 on      #pca9545 channel 4
+                                                               chip drivers/i2c/adm1027   #HWM ADT7476 2
+                                                                       device i2c 2e on end
+                                                               end
+                                                       end
+                                               end
+                                       end
+
+                                       device pci 2.0 on end # USB 1.1
+                                       device pci 2.1 on end # USB 2
+                                       device pci 4.0 on  end # IDE
+                                               device pci 5.0 on  end # SATA 0
+                                       device pci 5.1 on  end # SATA 1
+                                       device pci 5.2 on  end # SATA 2
+                                       device pci 6.0 on  #P2P
+                                               chip drivers/pci/onboard
+                                                       device pci 4.0 on end
+                                                       register "rom_address" = "0xfff80000"
+                                               end
+                                       end # P2P
+                                       device pci 7.0 on end # reserve
+                                       device pci 8.0 on end # MAC0
+                                       device pci 9.0 on end # MAC1
+                                       device pci a.0 on
+                                               device pci 0.0 on
+                                                       chip drivers/pci/onboard
+                                                               device pci 4.0 on end  #pci_E lan1
+                                                               device pci 4.1 on end  #pci_E lan2
+                                                       end
+                                               end
+                                       end # 0x376
+                                               device pci b.0 on  end # PCI E 0x374
+                                       device pci c.0 on  end
+                                       device pci d.0 on   #SAS
+                                               chip drivers/pci/onboard
+                                                       device pci 0.0 on end
+                                               end
+                                       end # PCI E 1 0x378
+                                       device pci e.0 on end # PCI E 0 0x375
+                                       device pci f.0 on end   #PCI E 0x377  pci_E slot
+                                       register "ide0_enable" = "1"
+                                       register "ide1_enable" = "1"
+                                       register "sata0_enable" = "1"
+                                       register "sata1_enable" = "1"
+                               end
+                       end #  device pci 18.0
+                       device pci 18.0 on end # Link 1
+                       device pci 18.0 on end
+                       device pci 18.1 on end
+                       device pci 18.2 on end
+                       device pci 18.3 on end
+               end #mc0
+
+       end # pci_domain
+
+#        chip drivers/generic/debug
+#                device pnp 0.0 off end
+#                device pnp 0.1 off end
+#                device pnp 0.2 off end
+#                device pnp 0.3 off end
+#                device pnp 0.4 off end
+#              device pnp 0.5 on end
+#        end
+end # root_complex
diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb
new file mode 100644
index 0000000000..7671f6825b
--- /dev/null
+++ b/src/mainboard/msi/ms9282/Options.lb
@@ -0,0 +1,309 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2006 AMD
+## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
+##
+## Copyright (C) 2006 MSI
+## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+#bx_b001- uses K8_HW_MEM_HOLE_SIZEK
+uses K8_HT_FREQ_1G_SUPPORT
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+#bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+#bx_b005+
+uses SB_HT_CHAIN_ON_BUS0
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+#512K bytes
+default ROM_SIZE=524288
+
+#1M bytes
+#bx- default ROM_SIZE=1048576
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+#default FALLBACK_SIZE=131072
+#256K
+default FALLBACK_SIZE=0x40000
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=4
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_LOGICAL_CPUS=1
+
+#CHIP_NAME ?
+#default CONFIG_CHIP_NAME=1
+
+#1G memory hole
+#bx_b001- default K8_HW_MEM_HOLE_SIZEK=0x100000
+
+#Opteron K8 1G HT Support
+default K8_HT_FREQ_1G_SUPPORT=1
+
+##HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0x0
+
+##real SB Unit ID, default is 0x20, mean dont touch it at last
+#default HT_CHAIN_END_UNITID_BASE=0x0
+
+#make the SB HT chain on bus 0, default is not (0)
+#bx_b001- default K8_SB_HT_CHAIN_ON_BUS0=2
+
+##bx_b005+ make the SB HT chain on bus 0
+default SB_HT_CHAIN_ON_BUS0=1
+
+##only offset for SB chain?, default is yes(1)
+default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
+#VGA
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xcc000
+default DCACHE_RAM_SIZE=0x4000
+default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_INIT=0
+
+default ENABLE_APIC_EXT_ID=1
+default APIC_ID_OFFSET=0x10
+default LIFT_BSP_APIC_ID=0
+
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="ms9282"
+default MAINBOARD_VENDOR="MSI"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x9282
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable
+## ALERT      2   action must be taken immediately
+## CRIT       3   critical conditions
+## ERR        4   error conditions
+## WARNING    5   warning conditions
+## NOTICE     6   normal but significant condition
+## INFO       7   informational
+## DEBUG      8   debug-level messages
+## SPEW       9   Way too many details
+
+## Request this level of debugging output
+default  DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default  MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
diff --git a/src/mainboard/msi/ms9282/cache_as_ram_auto.c b/src/mainboard/msi/ms9282/cache_as_ram_auto.c
new file mode 100644
index 0000000000..19f3a13dee
--- /dev/null
+++ b/src/mainboard/msi/ms9282/cache_as_ram_auto.c
@@ -0,0 +1,296 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+
+#define SET_NB_CFG_54 1
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+//used by init_cpus and fidvid
+#define K8_SET_FIDVID 1
+//if we want to wait for core1 done before DQS training, set it to 0
+#define K8_SET_FIDVID_CORE0_ONLY 1
+
+#define DEBUG_SMBUS 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#if CONFIG_USE_INIT == 0
+       #include "lib/memcpy.c"
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
+#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC)
+
+#include <device/pci_ids.h>
+#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+#define SMBUS_SWITCH1 0x70
+#define SMBUS_SWITCH2 0x72
+        unsigned device=(ctrl->channel0[0])>>8;
+        smbus_send_byte(SMBUS_SWITCH1, device);
+       smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
+}
+
+#if 0
+static inline void change_i2c_mux(unsigned device)
+{
+#define SMBUS_SWITCH1 0x70
+#define SMBUS_SWITHC2 0x72
+        smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
+       smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
+}
+#endif
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+       return smbus_read_byte(device, address);
+}
+
+//#define K8_4RANK_DIMM_SUPPORT 1
+
+#include "northbridge/amd/amdk8/amdk8_f.h"
+#include "northbridge/amd/amdk8/raminit_f.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+ /* msi does not want the default */
+#include "resourcemap.c"
+#include "cpu/amd/dualcore/dualcore.c"
+
+#define MCP55_NUM 1
+#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
+//set GPIO to input mode
+#define MCP55_MB_SETUP \
+                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
+                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
+
+#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#if USE_FALLBACK_IMAGE == 1
+
+#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+static void sio_setup(void)
+{
+
+        unsigned value;
+        uint32_t dword;
+        uint8_t byte;
+
+        byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+        byte |= 0x20;
+        pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+
+        dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+        dword |= (1<<0);
+        pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+
+
+}
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+        unsigned last_boot_normal_x = last_boot_normal();
+
+        /* Is this a cpu only reset? or Is this a secondary cpu? */
+        if ((cpu_init_detectedx) || (!boot_cpu())) {
+                if (last_boot_normal_x) {
+                        goto normal_image;
+                } else {
+                        goto fallback_image;
+                }
+        }
+
+        /* Nothing special needs to be done to find bus 0 */
+        /* Allow the HT devices to be found */
+
+        enumerate_ht_chain();
+
+        sio_setup();
+
+        /* Setup the mcp55 */
+        mcp55_enable_rom();
+
+        /* Is this a deliberate reset by the bios */
+        if (bios_reset_detected() && last_boot_normal_x) {
+                goto normal_image;
+        }
+        /* This is the primary cpu how should I boot? */
+        else if (do_normal_boot()) {
+                goto normal_image;
+        }
+        else {
+                goto fallback_image;
+        }
+ normal_image:
+        __asm__ volatile ("jmp __normal_image"
+                : /* outputs */
+                : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
+                );
+
+ fallback_image:
+       ;
+}
+#endif
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+
+#if USE_FALLBACK_IMAGE == 1
+        failover_process(bist, cpu_init_detectedx);
+#endif
+        real_main(bist, cpu_init_detectedx);
+
+}
+
+//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1.
+#define RC0 (2<<8)
+#define RC1 (1<<8)
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+       static const uint16_t spd_addr [] = {
+                       RC0|(0xa<<3)|0, RC0|(0xa<<3)|2, RC0|(0xa<<3)|4, RC0|(0xa<<3)|6,
+                       RC0|(0xa<<3)|1, RC0|(0xa<<3)|3, RC0|(0xa<<3)|5, RC0|(0xa<<3)|7,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+                       RC1|(0xa<<3)|0, RC1|(0xa<<3)|2, RC1|(0xa<<3)|4, RC1|(0xa<<3)|6,
+                       RC1|(0xa<<3)|1, RC1|(0xa<<3)|3, RC1|(0xa<<3)|5, RC1|(0xa<<3)|7,
+#endif
+       };
+
+       unsigned bsp_apicid = 0;
+        int needs_reset;
+       struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+       char *p ;
+
+        if (bist == 0) {
+               //init_cpus(cpu_init_detectedx);
+               bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+        }
+
+       w83627ehg_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+
+       /* Halt if there was a built in self test failure */
+       report_bist_failure(bist);
+
+        setup_ms9282_resource_map();
+
+       setup_coherent_ht_domain();
+
+        wait_all_core0_started();
+
+#if CONFIG_LOGICAL_CPUS==1
+        // It is said that we should start core1 after all core0 launched
+        start_other_cores();
+        //wait_all_other_cores_started(bsp_apicid);
+#endif
+        ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+
+       needs_reset = optimize_link_coherent_ht();
+
+       needs_reset |= optimize_link_incoherent_ht(sysinfo);
+
+        needs_reset |= mcp55_early_setup_x();
+
+               if (needs_reset) {
+                       print_info("ht reset -\r\n");
+                       soft_reset();
+               }
+
+        //It's the time to set ctrl now;
+        fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+
+       enable_smbus();
+
+#if 0
+        int i;
+        for(i=4;i<8;i++) {
+                change_i2c_mux(i);
+                dump_smbus_registers();
+        }
+#endif
+
+       memreset_setup();
+
+       sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+
+       post_cache_as_ram();
+
+}
diff --git a/src/mainboard/msi/ms9282/chip.h b/src/mainboard/msi/ms9282/chip.h
new file mode 100644
index 0000000000..5c6798c4a0
--- /dev/null
+++ b/src/mainboard/msi/ms9282/chip.h
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_msi_ms9282_ops;
+
+struct mainboard_msi_ms9282_config {
+       int fixup_scsi;
+       int fixup_vga;
+};
diff --git a/src/mainboard/msi/ms9282/cmos.layout b/src/mainboard/msi/ms9282/cmos.layout
new file mode 100644
index 0000000000..ecf89a9b5d
--- /dev/null
+++ b/src/mainboard/msi/ms9282/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399         1       e       2        dual_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432         8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     DDR400
+8     1     DDR333
+8     2     DDR266
+8     3     DDR200
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/msi/ms9282/failover.c b/src/mainboard/msi/ms9282/failover.c
new file mode 100644
index 0000000000..199a5e9e3e
--- /dev/null
+++ b/src/mainboard/msi/ms9282/failover.c
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+
+#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+
+static void sio_setup(void)
+{
+
+        unsigned value;
+       uint32_t dword;
+       uint8_t byte;
+
+        byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+        byte |= 0x20;
+        pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+
+       dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+       dword |= (1<<0);
+       pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+
+
+}
+
+#if CONFIG_LOGICAL_CPUS==1
+#include "cpu/amd/dualcore/dualcore_id.c"
+#endif
+
+static unsigned long main(unsigned long bist)
+{
+        /* Make cerain my local apic is useable */
+        enable_lapic();
+
+        /* Is this a cpu only reset? */
+        if (early_mtrr_init_detected()) {
+               if (last_boot_normal()) {
+                       goto normal_image;
+               } else {
+                       goto fallback_image;
+               }
+       }
+
+       /* Is this a secondary cpu? */
+       if (!boot_cpu()) {
+               if (last_boot_normal()) {
+                       goto normal_image;
+               } else {
+                       goto fallback_image;
+               }
+       }
+
+       /* Nothing special needs to be done to find bus 0 */
+       /* Allow the HT devices to be found */
+
+       enumerate_ht_chain();
+
+       sio_setup();
+
+       /* Setup the mcp55 */
+       mcp55_enable_rom();
+
+       /* Is this a deliberate reset by the bios */
+       if (bios_reset_detected() && last_boot_normal()) {
+               goto normal_image;
+       }
+       /* This is the primary cpu how should I boot? */
+       else if (do_normal_boot()) {
+               goto normal_image;
+       }
+       else {
+               goto fallback_image;
+       }
+ normal_image:
+       asm volatile ("jmp __normal_image"
+               : /* outputs */
+               : "a" (bist) /* inputs */
+               : /* clobbers */
+               );
+ fallback_image:
+       return bist;
+}
diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c
new file mode 100644
index 0000000000..a446e89afc
--- /dev/null
+++ b/src/mainboard/msi/ms9282/get_bus_conf.c
@@ -0,0 +1,168 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+#include "mb_sysconf.h"
+
+// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
+struct mb_sysconf_t mb_sysconf;
+
+unsigned pci1234x[] =
+{        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
+        //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+        0x0000ff0,
+        0x0000ff0,
+        0x0000ff0,
+//        0x0000ff0,
+//        0x0000ff0,
+//        0x0000ff0,
+//        0x0000ff0,
+//        0x0000ff0
+};
+unsigned hcdnx[] =
+{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
+       0x20202020,
+       0x20202020,
+        0x20202020,
+//        0x20202020,
+//        0x20202020,
+//        0x20202020,
+//        0x20202020,
+//        0x20202020,
+};
+
+
+extern void get_sblk_pci1234(void);
+
+static unsigned get_bus_conf_done = 0;
+
+static unsigned get_hcid(unsigned i)
+{
+        unsigned id = 0;
+
+        unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+
+        unsigned devn = sysconf.hcdn[i] & 0xff;
+
+        device_t dev;
+
+        dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
+
+        switch (dev->device) {
+        case 0x0369: //IO55
+                id = 4;
+                break;
+        }
+
+        // we may need more way to find out hcid: subsystem id? GPIO read ?
+
+        // we need use id for 1. bus num, 2. mptable, 3. acpi table
+
+        return id;
+}
+
+void get_bus_conf(void)
+{
+
+       unsigned apicid_base;
+       struct mb_sysconf_t *m;
+
+        device_t dev;
+        int i, j;
+
+        if(get_bus_conf_done==1) return; //do it only once
+
+        get_bus_conf_done = 1;
+
+       sysconf.mb = &mb_sysconf;
+
+       m = sysconf.mb;
+       memset(m, 0, sizeof(struct mb_sysconf_t));
+
+        sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+        for(i=0;i<sysconf.hc_possible_num; i++) {
+                sysconf.pci1234[i] = pci1234x[i];
+                sysconf.hcdn[i] = hcdnx[i];
+        }
+
+        get_sblk_pci1234();
+
+       sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+
+       m->bus_type[0] = 1; //pci
+
+       m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+
+                /* MCP55 */
+                dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
+                if (dev) {
+                        m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+                }
+                else {
+                        printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
+                }
+
+               for(i=2; i<8;i++) {
+                       dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
+                       if (dev) {
+                               m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+                       }
+                       else {
+                               printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
+                       }
+               }
+
+       for(i=0; i< sysconf.hc_possible_num; i++) {
+               if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+                unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+                unsigned busn_max = (sysconf.pci1234[i] >> 24) & 0xff;
+               for (j = busn; j <= busn_max; j++)
+                       m->bus_type[j] = 1;
+               if(m->bus_isa <= busn_max)
+                       m->bus_isa = busn_max + 1;
+               printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+       }
+
+
+
+/*I/O APICs:   APIC ID Version State           Address*/
+#if CONFIG_LOGICAL_CPUS==1
+       apicid_base = get_apicid_base(1);
+#else
+       apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+       m->apicid_mcp55 = apicid_base+0;
+
+}
diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c
new file mode 100644
index 0000000000..83c7884273
--- /dev/null
+++ b/src/mainboard/msi/ms9282/irq_tables.c
@@ -0,0 +1,130 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* This file was generated by getpir.c, do not modify!
+   (but if you do, please run checkpir on it to verify)
+   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+#include "mb_sysconf.h"
+
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+               uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
+               uint8_t slot, uint8_t rfu)
+{
+        pirq_info->bus = bus;
+        pirq_info->devfn = devfn;
+                pirq_info->irq[0].link = link0;
+                pirq_info->irq[0].bitmap = bitmap0;
+                pirq_info->irq[1].link = link1;
+                pirq_info->irq[1].bitmap = bitmap1;
+                pirq_info->irq[2].link = link2;
+                pirq_info->irq[2].bitmap = bitmap2;
+                pirq_info->irq[3].link = link3;
+                pirq_info->irq[3].bitmap = bitmap3;
+        pirq_info->slot = slot;
+        pirq_info->rfu = rfu;
+}
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+       struct irq_routing_table *pirq;
+       struct irq_info *pirq_info;
+       unsigned slot_num;
+       uint8_t *v;
+       struct mb_sysconf_t *m;
+       unsigned sbdn;
+
+        uint8_t sum=0;
+        int i;
+
+        get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+       sbdn = sysconf.sbdn;
+       m = sysconf.mb;
+
+        /* Align the table to be 16 byte aligned. */
+        addr += 15;
+        addr &= ~15;
+
+        /* This table must be betweeen 0xf0000 & 0x100000 */
+        printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+       pirq = (void *)(addr);
+       v = (uint8_t *)(addr);
+
+       pirq->signature = PIRQ_SIGNATURE;
+       pirq->version  = PIRQ_VERSION;
+
+       pirq->rtr_bus = m->bus_mcp55[0];
+       pirq->rtr_devfn = ((sbdn+6)<<3)|0;
+
+       pirq->exclusive_irqs = 0;
+
+       pirq->rtr_vendor = 0x10de;
+       pirq->rtr_device = 0x0370;
+
+       pirq->miniport_data = 0;
+
+       memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+       pirq_info = (void *) ( &pirq->checksum + 1);
+       slot_num = 0;
+//pci bridge
+       write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+       pirq_info++; slot_num++;
+
+        for(i=1; i< sysconf.hc_possible_num; i++) {
+                if(!(sysconf.pci1234[i] & 0x1) ) continue;
+                unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+                unsigned devn = sysconf.hcdn[i] & 0xff;
+
+                write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+                pirq_info++; slot_num++;
+       }
+
+       pirq->size = 32 + 16 * slot_num;
+
+        for (i = 0; i < pirq->size; i++)
+                sum += v[i];
+
+       sum = pirq->checksum - sum;
+
+        if (sum != pirq->checksum) {
+                pirq->checksum = sum;
+        }
+
+       printk_info("done.\n");
+
+       return  (unsigned long) pirq_info;
+
+}
diff --git a/src/mainboard/msi/ms9282/mainboard.c b/src/mainboard/msi/ms9282/mainboard.c
new file mode 100644
index 0000000000..a11403f4cb
--- /dev/null
+++ b/src/mainboard/msi/ms9282/mainboard.c
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_tyan_ms9282_ops = {
+       CHIP_NAME("MSI ms9282 mainboard")
+};
+#endif
diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h
new file mode 100644
index 0000000000..dca188f237
--- /dev/null
+++ b/src/mainboard/msi/ms9282/mb_sysconf.h
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+        unsigned char bus_isa;
+        unsigned char bus_mcp55[8]; //1
+        unsigned apicid_mcp55;
+       unsigned bus_type[256];
+
+};
+
+#endif
+
diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c
new file mode 100644
index 0000000000..9a5cfbc45b
--- /dev/null
+++ b/src/mainboard/msi/ms9282/mptable.c
@@ -0,0 +1,171 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+#include "mb_sysconf.h"
+
+void *smp_write_config_table(void *v)
+{
+        static const char sig[4] = "PCMP";
+        static const char oem[8] = "MSI    ";
+        static const char productid[12] = "MS9282       ";
+        struct mp_config_table *mc;
+       struct mb_sysconf_t *m;
+       unsigned sbdn;
+
+       int i,j;
+
+        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+        memset(mc, 0, sizeof(*mc));
+
+        memcpy(mc->mpc_signature, sig, sizeof(sig));
+        mc->mpc_length = sizeof(*mc); /* initially just the header */
+        mc->mpc_spec = 0x04;
+        mc->mpc_checksum = 0; /* not yet computed */
+        memcpy(mc->mpc_oem, oem, sizeof(oem));
+        memcpy(mc->mpc_productid, productid, sizeof(productid));
+        mc->mpc_oemptr = 0;
+        mc->mpc_oemsize = 0;
+        mc->mpc_entry_count = 0; /* No entries yet... */
+        mc->mpc_lapic = LAPIC_ADDR;
+        mc->mpe_length = 0;
+        mc->mpe_checksum = 0;
+        mc->reserved = 0;
+
+        smp_write_processors(mc);
+
+       get_bus_conf();
+       sbdn = sysconf.sbdn;
+       m = sysconf.mb;
+
+/*Bus:         Bus ID  Type*/
+       /* define bus and isa numbers */
+        for(j= 0; j < 256 ; j++) {
+               if(m->bus_type[j])
+                        smp_write_bus(mc, j, "PCI   ");
+        }
+        smp_write_bus(mc, m->bus_isa, "ISA   ");
+
+/*I/O APICs:   APIC ID Version State           Address*/
+        {
+                device_t dev;
+               struct resource *res;
+               uint32_t dword;
+
+                dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
+                if (dev) {
+                       res = find_resource(dev, PCI_BASE_ADDRESS_1);
+                       if (res) {
+                               smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
+                       }
+
+                       dword = 0x43c6c643;
+                       pci_write_config32(dev, 0x7c, dword);
+
+                       dword = 0x81001a00;
+                       pci_write_config32(dev, 0x80, dword);
+
+                       dword = 0xd00002d2;
+                       pci_write_config32(dev, 0x84, dword);
+
+                }
+
+
+       }
+
+                  /*I/O Ints:  Type    Polarity    Trigger                     Bus ID   IRQ    APIC ID PIN# */
+       smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x3, m->apicid_mcp55, 0x3);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x4, m->apicid_mcp55, 0x4);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x6, m->apicid_mcp55, 0x6);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x7, m->apicid_mcp55, 0x7);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x8, m->apicid_mcp55, 0x8);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0xc, m->apicid_mcp55, 0xc);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0xd, m->apicid_mcp55, 0xd);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
+       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
+
+//SMBUS
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
+
+//USB1.1
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
+
+//USB2.0
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
+
+//SATA1
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
+
+//SATA2
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
+
+//SATA3
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
+
+//NIC1
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
+//NIC2
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
+
+       for(j=7; j>=2; j--) {
+               if(!m->bus_mcp55[j]) continue;
+               for(i=0;i<4;i++) {
+                       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
+               }
+       }
+
+       for(j=0; j<1; j++)
+               for(i=0;i<4;i++) {
+                       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
+               }
+
+/*Local Ints:  Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#*/
+       smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
+       smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1);
+       /* There is no extension information... */
+
+       /* Compute the checksums */
+       mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+       mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+       printk_debug("Wrote the mp table end at: %p - %p\n",
+               mc, smp_next_mpe_entry(mc));
+       return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+       void *v;
+       v = smp_write_floating_table(addr);
+       return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c
new file mode 100644
index 0000000000..8656a5daee
--- /dev/null
+++ b/src/mainboard/msi/ms9282/resourcemap.c
@@ -0,0 +1,299 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de>
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
+ *
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * MSI ms9282 needs a different resource map
+ *
+ */
+
+static void setup_ms9282_resource_map(void)
+{
+       static const unsigned int register_values[] = {
+#if 1
+               /* Careful set limit registers before base registers which contain the enables */
+               /* DRAM Limit i Registers
+                * F1:0x44 i = 0
+                * F1:0x4C i = 1
+                * F1:0x54 i = 2
+                * F1:0x5C i = 3
+                * F1:0x64 i = 4
+                * F1:0x6C i = 5
+                * F1:0x74 i = 6
+                * F1:0x7C i = 7
+                * [ 2: 0] Destination Node ID
+                *         000 = Node 0
+                *         001 = Node 1
+                *         010 = Node 2
+                *         011 = Node 3
+                *         100 = Node 4
+                *         101 = Node 5
+                *         110 = Node 6
+                *         111 = Node 7
+                * [ 7: 3] Reserved
+                * [10: 8] Interleave select
+                *         specifies the values of A[14:12] to use with interleave enable.
+                * [15:11] Reserved
+                * [31:16] DRAM Limit Address i Bits 39-24
+                *         This field defines the upper address bits of a 40 bit  address
+                *         that define the end of the DRAM region.
+                */
+               PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+               PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+               PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+               PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+               PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+               PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+               PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+               /* DRAM Base i Registers
+                * F1:0x40 i = 0
+                * F1:0x48 i = 1
+                * F1:0x50 i = 2
+                * F1:0x58 i = 3
+                * F1:0x60 i = 4
+                * F1:0x68 i = 5
+                * F1:0x70 i = 6
+                * F1:0x78 i = 7
+                * [ 0: 0] Read Enable
+                *         0 = Reads Disabled
+                *         1 = Reads Enabled
+                * [ 1: 1] Write Enable
+                *         0 = Writes Disabled
+                *         1 = Writes Enabled
+                * [ 7: 2] Reserved
+                * [10: 8] Interleave Enable
+                *         000 = No interleave
+                *         001 = Interleave on A[12] (2 nodes)
+                *         010 = reserved
+                *         011 = Interleave on A[12] and A[14] (4 nodes)
+                *         100 = reserved
+                *         101 = reserved
+                *         110 = reserved
+                *         111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+                * [15:11] Reserved
+                * [13:16] DRAM Base Address i Bits 39-24
+                *         This field defines the upper address bits of a 40-bit address
+                *         that define the start of the DRAM region.
+                */
+               PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+#endif
+#if 1
+
+               /* Memory-Mapped I/O Limit i Registers
+                * F1:0x84 i = 0
+                * F1:0x8C i = 1
+                * F1:0x94 i = 2
+                * F1:0x9C i = 3
+                * F1:0xA4 i = 4
+                * F1:0xAC i = 5
+                * F1:0xB4 i = 6
+                * F1:0xBC i = 7
+                * [ 2: 0] Destination Node ID
+                *         000 = Node 0
+                *         001 = Node 1
+                *         010 = Node 2
+                *         011 = Node 3
+                *         100 = Node 4
+                *         101 = Node 5
+                *         110 = Node 6
+                *         111 = Node 7
+                * [ 3: 3] Reserved
+                * [ 5: 4] Destination Link ID
+                *         00 = Link 0
+                *         01 = Link 1
+                *         10 = Link 2
+                *         11 = Reserved
+                * [ 6: 6] Reserved
+                * [ 7: 7] Non-Posted
+                *         0 = CPU writes may be posted
+                *         1 = CPU writes must be non-posted
+                * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+                *         This field defines the upp adddress bits of a 40-bit address that
+                *         defines the end of a memory-mapped I/O region n
+                */
+               PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+//             PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+               /* Memory-Mapped I/O Base i Registers
+                * F1:0x80 i = 0
+                * F1:0x88 i = 1
+                * F1:0x90 i = 2
+                * F1:0x98 i = 3
+                * F1:0xA0 i = 4
+                * F1:0xA8 i = 5
+                * F1:0xB0 i = 6
+                * F1:0xB8 i = 7
+                * [ 0: 0] Read Enable
+                *         0 = Reads disabled
+                *         1 = Reads Enabled
+                * [ 1: 1] Write Enable
+                *         0 = Writes disabled
+                *         1 = Writes Enabled
+                * [ 2: 2] Cpu Disable
+                *         0 = Cpu can use this I/O range
+                *         1 = Cpu requests do not use this I/O range
+                * [ 3: 3] Lock
+                *         0 = base/limit registers i are read/write
+                *         1 = base/limit registers i are read-only
+                * [ 7: 4] Reserved
+                * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+                *         This field defines the upper address bits of a 40bit address
+                *         that defines the start of memory-mapped I/O region i
+                */
+               PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+//             PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+#endif
+#if 1
+
+               /* PCI I/O Limit i Registers
+                * F1:0xC4 i = 0
+                * F1:0xCC i = 1
+                * F1:0xD4 i = 2
+                * F1:0xDC i = 3
+                * [ 2: 0] Destination Node ID
+                *         000 = Node 0
+                *         001 = Node 1
+                *         010 = Node 2
+                *         011 = Node 3
+                *         100 = Node 4
+                *         101 = Node 5
+                *         110 = Node 6
+                *         111 = Node 7
+                * [ 3: 3] Reserved
+                * [ 5: 4] Destination Link ID
+                *         00 = Link 0
+                *         01 = Link 1
+                *         10 = Link 2
+                *         11 = reserved
+                * [11: 6] Reserved
+                * [24:12] PCI I/O Limit Address i
+                *         This field defines the end of PCI I/O region n
+                * [31:25] Reserved
+                */
+               PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+               PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+               /* PCI I/O Base i Registers
+                * F1:0xC0 i = 0
+                * F1:0xC8 i = 1
+                * F1:0xD0 i = 2
+                * F1:0xD8 i = 3
+                * [ 0: 0] Read Enable
+                *         0 = Reads Disabled
+                *         1 = Reads Enabled
+                * [ 1: 1] Write Enable
+                *         0 = Writes Disabled
+                *         1 = Writes Enabled
+                * [ 3: 2] Reserved
+                * [ 4: 4] VGA Enable
+                *         0 = VGA matches Disabled
+                *         1 = matches all address < 64K and where A[9:0] is in the
+                *             range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+                * [ 5: 5] ISA Enable
+                *         0 = ISA matches Disabled
+                *         1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+                *             from matching agains this base/limit pair
+                * [11: 6] Reserved
+                * [24:12] PCI I/O Base i
+                *         This field defines the start of PCI I/O region n
+                * [31:25] Reserved
+                */
+               PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+               PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+#endif
+               /* Config Base and Limit i Registers
+                * F1:0xE0 i = 0
+                * F1:0xE4 i = 1
+                * F1:0xE8 i = 2
+                * F1:0xEC i = 3
+                * [ 0: 0] Read Enable
+                *         0 = Reads Disabled
+                *         1 = Reads Enabled
+                * [ 1: 1] Write Enable
+                *         0 = Writes Disabled
+                *         1 = Writes Enabled
+                * [ 2: 2] Device Number Compare Enable
+                *         0 = The ranges are based on bus number
+                *         1 = The ranges are ranges of devices on bus 0
+                * [ 3: 3] Reserved
+                * [ 6: 4] Destination Node
+                *         000 = Node 0
+                *         001 = Node 1
+                *         010 = Node 2
+                *         011 = Node 3
+                *         100 = Node 4
+                *         101 = Node 5
+                *         110 = Node 6
+                *         111 = Node 7
+                * [ 7: 7] Reserved
+                * [ 9: 8] Destination Link
+                *         00 = Link 0
+                *         01 = Link 1
+                *         10 = Link 2
+                *         11 - Reserved
+                * [15:10] Reserved
+                * [23:16] Bus Number Base i
+                *         This field defines the lowest bus number in configuration region i
+                * [31:24] Bus Number Limit i
+                *         This field defines the highest bus number in configuration region i
+                */
+#if 1
+//             PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003,
+//             PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203,
+               PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+               PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+#endif
+
+       };
+
+       int max;
+       max = sizeof(register_values)/sizeof(register_values[0]);
+       setup_resource_map(register_values, max);
+}
+
diff --git a/targets/msi/ms9282/Config.lb b/targets/msi/ms9282/Config.lb
new file mode 100644
index 0000000000..91d9f393d6
--- /dev/null
+++ b/targets/msi/ms9282/Config.lb
@@ -0,0 +1,91 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2006 MSI
+## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+target ms9282
+mainboard msi/ms9282
+
+romimage "normal"
+#       48K for SCSI FW
+#        option ROM_SIZE = 475136
+       option ROM_SIZE = 512*1024-36*1024
+#      option ROM_SIZE = 524288
+#       48K for SCSI FW and 48K for ATI ROM
+#       option ROM_SIZE = 425984
+#       64K for Etherboot
+#        option ROM_SIZE = 458752
+       option USE_FALLBACK_IMAGE=0
+#      option ROM_IMAGE_SIZE=0x13800
+#      option ROM_IMAGE_SIZE=0x18800
+       option ROM_IMAGE_SIZE=0x20000
+#      option ROM_IMAGE_SIZE=0x15800
+       option XIP_ROM_SIZE=0x40000
+       option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+#       payload ../../../payloads/tg3--ide_disk.zelf
+#        payload ../../../payloads/filo.elf
+#        payload ../../../payloads/filo_mem.elf
+#        payload ../../../payloads/filo.zelf
+#        payload ../../../payloads/tg3--filo_hda2.zelf
+#      payload ../../../payloads/tg3.zelf
+#      payload ../../../../payloads/tg3_vga.zelf
+#      payload /filo.elf
+       payload /tg3--filo.elf
+#      payload /payload
+#      payload ../../../../payloads/e1000_vga.zelf
+#      payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
+#      payload ../../../payloads/tg3_com2.zelf
+#       payload ../../../payloads/e1000--filo.zelf
+#        payload ../../../payloads/tg3--e1000--filo.zelf
+#        payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
+#      payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
+#      payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
+end
+
+romimage "fallback"
+       option USE_FALLBACK_IMAGE=1
+#      option ROM_IMAGE_SIZE=0x13800
+#      option ROM_IMAGE_SIZE=0x19800
+       option ROM_IMAGE_SIZE=0x20000
+#      option ROM_IMAGE_SIZE=0x15800
+       option XIP_ROM_SIZE=0x40000
+       option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+#       payload ../../../payloads/tg3--ide_disk.zelf
+#        payload ../../../payloads/filo.elf
+#        payload ../../../payloads/filo_mem.elf
+#        payload ../../../payloads/filo.zelf
+#        payload ../../../payloads/tg3--filo_hda2.zelf
+#      payload ../../../payloads/tg3.zelf
+#      payload ../../../../payloads/tg3_vga.zelf
+#      payload ../../../../payloads/memtest
+#      payload ../../../../payloads/e1000_vga.zelf
+#      payload ../../../../payloads/filo_hda.zelf
+#      payload /filo.elf
+       payload /tg3--filo.elf
+#      payload /payload
+#      payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
+#      payload ../../../payloads/tg3_com2.zelf
+#       payload ../../../payloads/e1000--filo.zelf
+#        payload ../../../payloads/tg3--e1000--filo.zelf
+#        payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
+#      payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
+#      payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
+end
+
+buildrom ./ms9282.lxb ROM_SIZE "normal" "fallback"