AMD Parmer: add IMC fan control

There are 3 steps to enable the IMC fan control:
1. Enable fan control related registers on Hudson using oem_fan_control().
2. Set EcStruct.
3. Enable thermal zone using enable_imc_thermal_zone().
I have tested on Parmer.

Change-Id: Id11d5c5da30346c034d155a73749e7f4c9c980eb
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/4302
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>

2 files changed, 40 insertions, 96 deletions

diff --git a/src/mainboard/amd/parmer/BiosCallOuts.c b/src/mainboard/amd/parmer/BiosCallOuts.c
index 5eaf4604f6..110c2c8565 100644
--- a/src/mainboard/amd/parmer/BiosCallOuts.c
+++ b/src/mainboard/amd/parmer/BiosCallOuts.c
@@ -25,6 +25,9 @@
 #include "heapManager.h"
 #include "FchPlatform.h"
 #include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
 
 STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
@@ -129,20 +132,11 @@ static const CODEC_TBL_LIST CodecTableList[] =
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	FCH_HWM_FAN_CTR oem_factl[5] = {
-		/*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
-		/* Parmer FanOUT0 Fan header J32 */
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		/* Parmer FanOUT1 Fan header J31*/
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-	};
-	LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
-
 	/* Enable IMC fan control. the recommand way */
-#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+	imc_reg_init();
+
 	/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
 	FchParams->Hwm.HwMonitorEnable = TRUE;
 	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
@@ -156,100 +150,42 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 	/* Thermal Zone Parameter */
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;	/* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
 
 	/* IMC Fan Policy temperature thresholds */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;	/* Zone */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80;	/*AC0 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0;	/*AC1 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0;	/*AC2 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80;	/*AC0 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c;	/*AC1 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32;	/*AC2 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff;	/*AC3 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff;	/*AC4 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff;	/*AC5 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff;	/*AC6 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b;	/*critical threshold* in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
 
 	/* IMC Fan Policy PWM Settings */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;	/* Zone */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0;	/* AL0 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0;	/* AL1 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0;	/* AL2 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00;	/* AL3 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00;	/* AL4 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00;	/* AL5 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00;	/* AL6 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00;	/* AL7 percentage */
-
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;	/* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
-
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;	/* zone */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;	/*AC0 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;	/*AC1 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;	/*AC2 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
-
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;	/*Zone */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;	/* AL0 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;	/* AL1 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;	/* AL2 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;	/* AL3 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;	/* AL4 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;	/* AL5 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;	/* AL6 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;	/* AL7 percentage */
-
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;	/* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;	/* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
-
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;	/* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
-
-	/* IMC Function */
-	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a;	/* AL0 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46;	/* AL1 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28;	/* AL2 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff;	/* AL3 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff;	/* AL4 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff;	/* AL5 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff;	/* AL6 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff;	/* AL7 percentage */
+
+	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 	/* NOTE:
 	 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c
index c92fea95ed..bf76fe2fe7 100644
--- a/src/mainboard/amd/parmer/get_bus_conf.c
+++ b/src/mainboard/amd/parmer/get_bus_conf.c
@@ -25,6 +25,9 @@
 #include <stdlib.h>
 #include <cpu/amd/amdfam14.h>
 #include "agesawrapper.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
 
 /* Global variables for MB layouts and these will be shared by irqtable mptable
  * and acpi_tables busnum is default.
@@ -134,4 +137,9 @@ void get_bus_conf(void)
 	bus_isa = 10;
 	apicid_base = CONFIG_MAX_CPUS;
 	apicid_hudson = apicid_base;
+
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+	/* AMD AGESA does not enable thermal zone, so we enable it here. */
+	enable_imc_thermal_zone();
+#endif
 }