mb/google/dedede/var/bugzzy: Update device tree

Update bugzzy device tree override based on the EVT schematics.

BUG=b:195215785
BRANCH=dedede
TEST=emerge-dedede coreboot

Change-Id: Iba8e3fd24461b4228c6e6fa933c0093e3e45ee97
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>

1 files changed, 212 insertions, 12 deletions

diff --git a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb
index 906bdf71ae..92a0497189 100644
--- a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb
@@ -2,6 +2,11 @@ chip soc/intel/jasperlake
 	# MIPI display panel
 	register "DdiPortAConfig" = "2" # DdiPortMipiDsi
 
+	# Disable PCIe Root Port 8 (index 7)
+	register "PcieRpEnable[7]" = "0"
+	# Disable PCIe Clock Source 4 (index 3)
+	register "PcieClkSrcUsage[3]" = "0xff"
+
 	# USB Port Configuration
 	register "usb2_ports[0]" = "{
 		.enable = 1,
@@ -31,7 +36,6 @@ chip soc/intel/jasperlake
 	register "usb2_ports[4]" = "USB2_PORT_EMPTY"
 	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"	# Camera
 
-
 	# Intel Common SoC Config
 	#+-------------------+---------------------------+
 	#| Field             |  Value                    |
@@ -54,9 +58,8 @@ chip soc/intel/jasperlake
 		},
 		.i2c[0] = {
 			.speed = I2C_SPEED_FAST,
-			.rise_time_ns = 66,
-			.fall_time_ns = 90,
-			.data_hold_time_ns = 350,
+			.rise_time_ns = 209,
+			.fall_time_ns = 12,
 		},
 		.i2c[1] = {
 			.speed = I2C_SPEED_FAST,
@@ -69,12 +72,70 @@ chip soc/intel/jasperlake
 		},
 		.i2c[4] = {
 			.speed = I2C_SPEED_FAST,
-			.speed_config[0] = {
-				.speed = I2C_SPEED_FAST,
-			}
+			.rise_time_ns = 175,
+			.fall_time_ns = 8,
 		},
 	}"
 	device domain 0 on
+		device pci 04.0 on
+			chip drivers/intel/dptf
+				register "options.tsr[0].desc" = ""Memory""
+				register "options.tsr[1].desc" = ""CPU""
+				register "options.tsr[2].desc" = ""Charger""
+				register "options.tsr[3].desc" = ""LTE""
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU, CPU,           90, 10000),
+					[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 100, 60000),
+					[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 100, 15000),
+					[3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 60, 15000),
+					[4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 100, 15000),
+				}"
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,           105, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 100, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 100, SHUTDOWN),
+					[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 100, SHUTDOWN),
+					[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 100, SHUTDOWN),
+				}"
+				register "controls.power_limits" = "{
+					.pl1 = {
+						.min_power = 6000,
+						.max_power = 6000,
+						.time_window_min = 1 * MSECS_PER_SEC,
+						.time_window_max = 1 * MSECS_PER_SEC,
+						.granularity = 200,
+					},
+					.pl2 = {
+						.min_power = 20000,
+						.max_power = 20000,
+						.time_window_min = 1 * MSECS_PER_SEC,
+						.time_window_max = 1 * MSECS_PER_SEC,
+						.granularity = 1000,
+					}
+				}"
+				register "controls.charger_perf" = "{
+					[0] = {  55, 3500 },
+					[1] = {  47, 3000 },
+					[2] = {  39, 2500 },
+					[3] = {  31, 2000 },
+				}"
+				device generic 0 on end
+			end
+		end # SA Thermal device
+		device pci 05.0 on # IPU - MIPI Camera
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "0x50000"
+				register "acpi_name" = ""IPU0""
+				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+				register "cio2_num_ports" = "2"
+				register "cio2_lanes_used" = "{1,4}"
+				register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1""
+				register "cio2_prt[0]" = "0"
+				register "cio2_prt[1]" = "2"
+				device generic 0 on end
+			end
+		end
 		device pci 14.0 on
 			chip drivers/usb/acpi
 				device usb 0.0 on
@@ -99,10 +160,149 @@ chip soc/intel/jasperlake
 				end
 			end
 		end # USB xHCI
-		device pci 15.0 on end
-		device pci 15.2 on end
-		device pci 1c.7 on end
-		device pci 19.0 on end
-                device pci 1f.3 on end
+		device pci 15.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+				register "wake" = "GPE0_DW0_03"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ZNT0000""
+				register "generic.desc" = ""Zinitix Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
+				register "generic.wake" = "GPE0_DW0_03"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0xE"
+				device i2c 40 on end
+			end
+		end # I2C 0
+		device pci 15.1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""WCOM014B""
+				register "generic.desc" = ""WCOM Digitizer""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D7_IRQ)"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "20"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E1)"
+				register "generic.reset_delay_ms" = "100"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x09 on end
+			end
+		end # I2C #1
+		device pci 15.2 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""HX121A""
+				register "generic.desc" = ""HX Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x4F on end
+			end
+		end # I2C #2
+		device pci 15.3 on
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""OVTI8856""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM1""
+				register "chip_name" = ""Ov 8856 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+
+				register "ssdb.lanes_used" = "4"
+				register "ssdb.link_used" = "1"
+				register "ssdb.vcm_type" = "0x0C"
+				register "vcm_name" = ""VCM0""
+				register "num_freq_entries" = "2"
+				register "link_freq[0]" = "360000000"
+				register "link_freq[1]" = "180000000"
+				register "remote_name" = ""IPU0""
+
+				register "has_power_resource" = "1"
+				#Controls
+				register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
+				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+				device i2c 36 on end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+				register "acpi_uid" = "3"
+				register "acpi_name" = ""VCM0""
+				register "chip_name" = ""DW AF DAC""
+				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
+
+				register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC""
+				register "vcm_compat" = ""dongwoon,dw9714""
+
+				device i2c 0C on end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "1"
+				register "acpi_name" = ""NVM0""
+				register "chip_name" = ""GT24C08""
+				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+
+				register "nvm_size" = "0x2000"
+				register "nvm_pagesize" = "1"
+				register "nvm_readonly" = "1"
+				register "nvm_width" = "0x10"
+				register "nvm_compat" = ""atmel,24c08""
+
+				device i2c 50 on end
+			end
+		end # I2C 3
+		device pci 1c.7 off end # PCI Express Root Port 8
+		device pci 19.0 on
+			chip drivers/i2c/da7219
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 1a on end
+			end
+		end #I2C 4
+		device pci 1f.3 on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98360A""
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
+				device generic 0 on end
+			end
+		end # Intel HDA
 	end
 end