mb/google/guybrush/nipperkin: update nipperkin config

copy config from guybrush reference board.

remove wwan & speaker amp due to the different solution is
used on nipperkin.

BUG=b:194031783
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage

Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I58a9b8393a965a9c793802d3e660829863b74375
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>

1 files changed, 141 insertions, 0 deletions

diff --git a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb
index c182265075..b0ce404bf4 100644
--- a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb
+++ b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb
@@ -1,7 +1,148 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
+fw_config
+	field USB_DB 0 1
+		option USB_DB_A1_PS8811_C1_PS8818 0
+		option USB_DB_A1_ANX7491_C1_ANX7451 1
+	end
+	field FORM_FACTOR 2
+		option FORM_FACTOR_CLAMSHELL 0
+		option FORM_FACTOR_CONVERTIBLE 1
+	end
+	field KB_BL 3
+		option KB_BL_ABSENT 0
+		option KB_BL_PRESENT 1
+	end
+	field FP 4
+		option FP_ABSENT 0
+		option FP_PRESENT 1
+	end
+	field WLAN 5 6
+		option WLAN_WCN6856 0
+		option WLAN_RTL8852 1
+	end
+	field WWAN 7 8
+		option WWAN_DIASABLED 0
+		option WWAN_L850GL 1
+	end
+	field BEEP_MODE 9
+		option BEEP_MODE_AMP 0
+		option BEEP_MODE_BIT_BANG 1
+	end
+end
 
 chip soc/amd/cezanne
 	device domain 0 on
 
 	end # domain
+
+	register "slow_ppt_limit_mW"         = "25000"
+	register "fast_ppt_limit_mW"         = "30000"
+	register "slow_ppt_time_constant_s"  = "5"
+	register "stapm_time_constant_s"     = "275"
+	register "sustained_power_limit_mW"  = "15000"
+	register "thermctl_limit_degreeC"    = "100"
+
+	register "telemetry_vddcrvddfull_scale_current_mA" = "92165" #mA
+	register "telemetry_vddcrvddoffset" =  "412"
+	register "telemetry_vddcrsocfull_scale_current_mA" = "30233" #mA
+	register "telemetry_vddcrsocoffset" =  "457"
+
+	# I2C Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| I2C0              | Trackpad                  |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | Speaker, Codec, P-SAR     |
+	#| I2C3              | H1 TPM                 |
+	#+-------------------+---------------------------+
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST,
+	}"
+
+	register "i2c[1]" = "{
+		.speed = I2C_SPEED_FAST,
+	}"
+
+	register "i2c[2]" = "{
+		.speed = I2C_SPEED_FAST,
+	}"
+
+	register "i2c[3]" = "{
+		.speed = I2C_SPEED_FAST,
+		.early_init = true,
+	}"
+
+	device ref i2c_0 on
+		chip drivers/i2c/generic
+			register "hid" = ""ELAN0000""
+			register "desc" = ""ELAN Touchpad""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
+			register "wake" = "GEVENT_22"
+			register "probed" = "1"
+			device i2c 15 on end
+		end
+	end # I2C0
+
+	device ref i2c_1 on
+		chip drivers/i2c/hid
+			register "generic.hid" = ""GDIX0000""
+			register "generic.desc" = ""Goodix Touchscreen""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_89)"
+			register "generic.probed" = "1"
+			register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_68)"
+			register "generic.enable_delay_ms" = "10"
+			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_121)"
+			register "generic.reset_off_delay_ms" = "1"
+			register "generic.reset_delay_ms" = "10"
+			register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_120)"
+			register "generic.stop_delay_ms" = "170"
+			register "generic.stop_off_delay_ms" = "1"
+			register "generic.has_power_resource" = "1"
+			register "hid_desc_reg_offset" = "0x01"
+			device i2c 5d on end
+		end
+		chip drivers/generic/gpio_keys
+			register "name" = ""PENH""
+			register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_4)"
+			register "key.dev_name" = ""EJCT""
+			register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+			register "key.linux_code" = "SW_PEN_INSERTED"
+			register "key.linux_input_type" = "EV_SW"
+			register "key.label" = ""pen_eject""
+			register "key.debounce_interval" = "100"
+			register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
+			device generic 0 on end
+		end
+	end # I2C1
+
+	device ref i2c_2 on
+		chip drivers/i2c/generic
+			register "hid" = ""10EC5682""
+			register "name" = ""RT58""
+			register "desc" = ""Realtek RT5682""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
+			register "property_count" = "1"
+			register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+			register "property_list[0].name" = ""realtek,jd-src""
+			register "property_list[0].integer" = "1"
+			device i2c 1a on end
+		end
+	end # I2C2
+
+	device ref uart_1 on
+		chip drivers/uart/acpi
+			register "name" = ""CRFP""
+			register "desc" = ""Fingerprint Reader""
+			register "hid" = "ACPI_DT_NAMESPACE_HID"
+			register "compat_string" = ""google,cros-ec-uart""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_21)"
+			register "wake" = "GEVENT_5"
+			register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)"
+			device generic 0 on
+				probe FP FP_PRESENT
+			end
+		end
+	end
+
 end	# chip soc/amd/cezanne