mb/google/brya/var/vell: Change AMP driver setting

1.Change I2S GPP_Sx (S0-S3) Native PAD Configuration from NF2 to NF4
2.Select CS35l53 AMP driver for Vell variant.

Change-Id: I96d49bd1a2ba061c4fd52b450b31d0885f49552c
Signed-off-by: Shon.Wang <shon.wang@quanta.corp-partner.google.com>
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

3 files changed, 44 insertions, 31 deletions

diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name
index 9bf50ae5bd..e29ef9fa56 100644
--- a/src/mainboard/google/brya/Kconfig.name
+++ b/src/mainboard/google/brya/Kconfig.name
@@ -156,10 +156,11 @@ config BOARD_GOOGLE_TANIKS
 config BOARD_GOOGLE_VELL
 	bool "->  Vell"
 	select BOARD_GOOGLE_BASEBOARD_BRYA
+	select CHROMEOS_WIFI_SAR if CHROMEOS
 	select DRIVERS_GFX_GENERIC
 	select DRIVERS_INTEL_MIPI_CAMERA
+	select DRIVERS_I2C_CS35L53
 	select SOC_INTEL_COMMON_BLOCK_IPU
-	select CHROMEOS_WIFI_SAR if CHROMEOS
 
 config BOARD_GOOGLE_VOLMAR
 	bool "->  Volmar"
diff --git a/src/mainboard/google/brya/variants/vell/gpio.c b/src/mainboard/google/brya/variants/vell/gpio.c
index e6588b9f85..e9600da09d 100644
--- a/src/mainboard/google/brya/variants/vell/gpio.c
+++ b/src/mainboard/google/brya/variants/vell/gpio.c
@@ -72,13 +72,13 @@ static const struct pad_config override_gpio_table[] = {
 	PAD_NC(GPP_R7, NONE),
 
 	/* S0 : SNDW0_CLK ==> I2S_SPKR_SCLK_R */
-	PAD_CFG_NF(GPP_S0, NONE, DEEP, NF2),
+	PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4),
 	/* S1 : SNDW0_DATA ==> I2S_SPKR_SFRM_R */
-	PAD_CFG_NF(GPP_S1, NONE, DEEP, NF2),
+	PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4),
 	/* S2 : SNDW1_CLK ==> DMIC_CLK0_R */
-	PAD_CFG_NF(GPP_S2, NONE, DEEP, NF3),
+	PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4),
 	/* S3 : SNDW1_DATA ==> I2S_PCH_RX_SPKR_TX */
-	PAD_CFG_NF(GPP_S3, NONE, DEEP, NF3),
+	PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4),
 	/* S4 : SNDW2_CLK ==> NC */
 	PAD_NC(GPP_S4, NONE),
 	/* S5 : SNDW2_DATA ==> NC */
diff --git a/src/mainboard/google/brya/variants/vell/overridetree.cb b/src/mainboard/google/brya/variants/vell/overridetree.cb
index 4199cec6a6..3af316406f 100644
--- a/src/mainboard/google/brya/variants/vell/overridetree.cb
+++ b/src/mainboard/google/brya/variants/vell/overridetree.cb
@@ -172,33 +172,45 @@ chip soc/intel/alderlake
 			end
 		end
 		device ref i2c0 on
-			chip drivers/i2c/generic
-				register "hid" = ""10EC5682""
-				register "name" = ""RT58""
-				register "desc" = ""Headset Codec""
-				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
-				# Set the jd_src to RT5668_JD1 for jack detection
-				register "property_count" = "1"
-				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
-				register "property_list[0].name" = ""realtek,jd-src""
-				register "property_list[0].integer" = "1"
-				device i2c 1a on
-					probe AUDIO MAX98360_ALC5682I_I2S
-				end
+			chip drivers/i2c/cs35l53
+				register "name" = ""SPK0""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+				register "boost_type" = "EXTERNAL_BOOST"
+				register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
+				register "gpio1_output_enable" = "true"
+				register "gpio1_src_select" = "GPIO1_SRC_GPIO"
+				register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
+				device i2c 0x40 on end
 			end
-			chip drivers/i2c/generic
-				register "hid" = ""RTL5682""
-				register "name" = ""RT58""
-				register "desc" = ""Headset Codec""
-				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
-				# Set the jd_src to RT5668_JD1 for jack detection
-				register "property_count" = "1"
-				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
-				register "property_list[0].name" = ""realtek,jd-src""
-				register "property_list[0].integer" = "1"
-				device i2c 1a on
-                                        probe AUDIO MAX98360_ALC5682IVS_I2S
-				end
+			chip drivers/i2c/cs35l53
+				register "name" = ""SPK1""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+				register "boost_type" = "EXTERNAL_BOOST"
+				register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
+				register "gpio1_output_enable" = "true"
+				register "gpio1_src_select" = "GPIO1_SRC_GPIO"
+				register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
+				device i2c 0x41 on end
+			end
+			chip drivers/i2c/cs35l53
+				register "name" = ""SPK2""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+				register "boost_type" = "EXTERNAL_BOOST"
+				register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
+				register "gpio1_output_enable" = "true"
+				register "gpio1_src_select" = "GPIO1_SRC_GPIO"
+				register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
+				device i2c 0x42 on end
+			end
+			chip drivers/i2c/cs35l53
+				register "name" = ""SPK3""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+				register "boost_type" = "EXTERNAL_BOOST"
+				register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
+				register "gpio1_output_enable" = "true"
+				register "gpio1_src_select" = "GPIO1_SRC_GPIO"
+				register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
+				device i2c 0x43 on end
 			end
 		end #I2C0
 		device ref i2c1 on