GOOGLE/SNOW: add edp support to ramstage

Add basic edp support to the ramstage. Not working.

Change-Id: I15086e03417edca7426c214e67b51719d8ed9341
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3055
Tested-by: build bot (Jenkins)

5 files changed, 217 insertions, 28 deletions

diff --git a/src/cpu/samsung/exynos5-common/exynos-fb.c b/src/cpu/samsung/exynos5-common/exynos-fb.c
index 615a720ead..b57e27631f 100644
--- a/src/cpu/samsung/exynos5-common/exynos-fb.c
+++ b/src/cpu/samsung/exynos5-common/exynos-fb.c
@@ -203,7 +203,7 @@ static int s5p_dp_config_video(struct s5p_dp_device *dp,
 				      video_info->ycbcr_coeff);
 
 	if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-		debug("PLL is not locked yet.\n");
+		printk(BIOS_DEBUG, "PLL is not locked yet.\n");
 		return -ERR_PLL_NOT_UNLOCKED;
 	}
 
@@ -216,7 +216,7 @@ static int s5p_dp_config_video(struct s5p_dp_device *dp,
 	} while (get_timer(start) <= STREAM_ON_TIMEOUT);
 
 	if (!timeout) {
-		debug("Video Clock Not ok\n");
+		printk(BIOS_DEBUG, "Video Clock Not ok\n");
 		return -ERR_VIDEO_CLOCK_BAD;
 	}
 
@@ -236,7 +236,7 @@ static int s5p_dp_config_video(struct s5p_dp_device *dp,
 	timeout = s5p_dp_is_video_stream_on(dp);
 
 	if (timeout) {
-		debug("Video Stream Not on\n");
+		printk(BIOS_DEBUG, "Video Stream Not on\n");
 		return -ERR_VIDEO_STREAM_BAD;
 	}
 
@@ -253,14 +253,14 @@ static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp)
 	u8 data;
 
 	if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data)) {
-		debug("DPCD read error\n");
+		printk(BIOS_DEBUG, "DPCD read error\n");
 		return -ERR_DPCD_READ_ERROR1;
 	}
 
 	if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
 				      DPCD_ENHANCED_FRAME_EN |
 				      (data & DPCD_LANE_COUNT_SET_MASK))) {
-		debug("DPCD write error\n");
+		printk(BIOS_DEBUG, "DPCD write error\n");
 		return -ERR_DPCD_WRITE_ERROR1;
 	}
 
@@ -281,13 +281,13 @@ static int s5p_dp_enable_scramble(struct s5p_dp_device *dp)
 
 	if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET,
 				       &data)) {
-		debug("DPCD read error\n");
+		printk(BIOS_DEBUG, "DPCD read error\n");
 		return -ERR_DPCD_READ_ERROR2;
 	}
 
 	if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET,
 			      (u8)(data & ~DPCD_SCRAMBLING_DISABLED))) {
-		debug("DPCD write error\n");
+		printk(BIOS_DEBUG, "DPCD write error\n");
 		return -ERR_DPCD_WRITE_ERROR2;
 	}
 
@@ -314,10 +314,10 @@ static int s5p_dp_init_dp(struct s5p_dp_device *dp)
 			break;
 
 		udelay(5000);
-		debug("LCD retry init, attempt=%d ret=%d\n", i, ret);
+		printk(BIOS_DEBUG, "LCD retry init, attempt=%d ret=%d\n", i, ret);
 	}
 	if (i == DP_INIT_TRIES) {
-		debug("LCD initialization failed, ret=%d\n", ret);
+		printk(BIOS_DEBUG, "LCD initialization failed, ret=%d\n", ret);
 		return ret;
 	}
 
@@ -356,7 +356,7 @@ static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp,
 		writel(reg, &base->ln3_link_trn_ctl);
 		break;
 	default:
-		debug("%s: Invalid lane %d\n", __func__, lane);
+		printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane);
 		return -ERR_INVALID_LANE;
 	}
 	return 0;
@@ -438,7 +438,7 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
 	for (lane = 0; lane < max_lane; lane++)
 		if (s5p_dp_set_lane_lane_pre_emphasis(dp,
 					      PRE_EMPHASIS_LEVEL_0, lane)) {
-			debug("Unable to set pre emphasis level\n");
+			printk(BIOS_DEBUG, "Unable to set pre emphasis level\n");
 			return -ERR_PRE_EMPHASIS_LEVELS;
 		}
 
@@ -451,14 +451,14 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
 
 	if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
 	    (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
-		debug("Rx Max Link Rate is abnormal :%x !\n",
+		printk(BIOS_DEBUG, "Rx Max Link Rate is abnormal :%x !\n",
 		      dp->link_train.link_rate);
 		/* Not Retrying */
 		return -ERR_LINK_RATE_ABNORMAL;
 	}
 
 	if (dp->link_train.lane_count == 0) {
-		debug("Rx Max Lane count is abnormal :%x !\n",
+		printk(BIOS_DEBUG, "Rx Max Lane count is abnormal :%x !\n",
 		      dp->link_train.lane_count);
 		/* Not retrying */
 		return -ERR_MAX_LANE_COUNT_ABNORMAL;
@@ -487,7 +487,7 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
 	/* Get hardware link training status */
 	data = readl(&base->dp_hw_link_training);
 	if (data != 0) {
-		debug(" H/W link training failure: 0x%x\n", data);
+		printk(BIOS_DEBUG, " H/W link training failure: 0x%x\n", data);
 		return -ERR_LINK_TRAINING_FAILURE;
 	}
 
@@ -521,14 +521,14 @@ int dp_controller_init(struct s5p_dp_device *dp_device, unsigned *wait_ms)
 	power_enable_dp_phy();
 	ret = s5p_dp_init_dp(dp);
 	if (ret) {
-		debug("%s: Could not initialize dp\n", __func__);
+		printk(BIOS_DEBUG, "%s: Could not initialize dp\n", __func__);
 		return ret;
 	}
 
 	ret = s5p_dp_hw_link_training(dp, dp->video_info->lane_count,
 				      dp->video_info->link_rate);
 	if (ret) {
-		debug("unable to do link train\n");
+		printk(BIOS_DEBUG, "unable to do link train\n");
 		return ret;
 	}
 	/* Minimum delay after H/w Link training */
@@ -536,13 +536,13 @@ int dp_controller_init(struct s5p_dp_device *dp_device, unsigned *wait_ms)
 
 	ret = s5p_dp_enable_scramble(dp);
 	if (ret) {
-		debug("unable to set scramble mode\n");
+		printk(BIOS_DEBUG, "unable to set scramble mode\n");
 		return ret;
 	}
 
 	ret = s5p_dp_enable_rx_to_enhanced_mode(dp);
 	if (ret) {
-		debug("unable to set enhanced mode\n");
+		printk(BIOS_DEBUG, "unable to set enhanced mode\n");
 		return ret;
 	}
 
@@ -557,7 +557,7 @@ int dp_controller_init(struct s5p_dp_device *dp_device, unsigned *wait_ms)
 	s5p_dp_init_video(dp);
 	ret = s5p_dp_config_video(dp, dp->video_info);
 	if (ret) {
-		debug("unable to config video\n");
+		printk(BIOS_DEBUG, "unable to config video\n");
 		return ret;
 	}
 
diff --git a/src/cpu/samsung/exynos5-common/s5p-dp-core.h b/src/cpu/samsung/exynos5-common/s5p-dp-core.h
index 67c1990cfd..2988d5d248 100644
--- a/src/cpu/samsung/exynos5-common/s5p-dp-core.h
+++ b/src/cpu/samsung/exynos5-common/s5p-dp-core.h
@@ -250,6 +250,7 @@ void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp,
 void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp);
 
 /* startup and init */
+struct exynos5_fimd_panel;
 void fb_init(vidinfo_t *panel_info, void *lcdbase, struct exynos5_fimd_panel *pd);
 int dp_controller_init(struct s5p_dp_device *dp_device, unsigned *wait_ms);
 int lcd_ctrl_init(vidinfo_t *panel_info, struct exynos5_fimd_panel *panel_data, void *lcdbase);
diff --git a/src/cpu/samsung/exynos5-common/s5p-dp-reg.c b/src/cpu/samsung/exynos5-common/s5p-dp-reg.c
index adb64a8e10..60e1398ba4 100644
--- a/src/cpu/samsung/exynos5-common/s5p-dp-reg.c
+++ b/src/cpu/samsung/exynos5-common/s5p-dp-reg.c
@@ -19,6 +19,8 @@
 #include "cpu/samsung/exynos5250/fimd.h"
 #include "s5p-dp-core.h"
 
+#include <console/console.h>
+
 void s5p_dp_reset(struct s5p_dp_device *dp)
 {
 	u32 reg;
@@ -127,7 +129,7 @@ int s5p_dp_init_analog_func(struct s5p_dp_device *dp)
 		start = get_timer(0);
 		while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
 			if (get_timer(start) > PLL_LOCK_TIMEOUT) {
-				debug("%s: PLL is not locked yet\n", __func__);
+				printk(BIOS_DEBUG, "%s: PLL is not locked yet\n", __func__);
 				return -1;
 			}
 		}
@@ -174,6 +176,9 @@ int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp)
 	/* Enable AUX CH operation */
 	setbits_le32(&base->aux_ch_ctl_2, AUX_EN);
 
+	printk(BIOS_DEBUG, "%s: base: 0x%p, &base->aux_ch_ctl_2: 0x%p, aux_ch_ctl_2: 0x%08x\n",
+			__func__, base, &base->aux_ch_ctl_2, readl(&base->aux_ch_ctl_2));
+
 	/* Is AUX CH command reply received? */
 	reg = readl(&base->dp_int_sta);
 	while (!(reg & RPLY_RECEIV))
@@ -184,6 +189,7 @@ int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp)
 
 	/* Clear interrupt source for AUX CH access error */
 	reg = readl(&base->dp_int_sta);
+	printk(BIOS_DEBUG, "%s: dp_int_sta: 0x%02x\n", __func__, reg);
 	if (reg & AUX_ERR) {
 		writel(AUX_ERR, &base->dp_int_sta);
 		return -1;
@@ -192,7 +198,7 @@ int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp)
 	/* Check AUX CH error access status */
 	reg = readl(&base->dp_int_sta);
 	if ((reg & AUX_STATUS_MASK) != 0) {
-		debug("AUX CH error happens: %d\n\n",
+		printk(BIOS_DEBUG, "AUX CH error happens: %d\n\n",
 			reg & AUX_STATUS_MASK);
 		return -1;
 	}
@@ -241,7 +247,7 @@ int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
 		if (retval == 0)
 			break;
 		else
-			debug("Aux Transaction fail!\n");
+			printk(BIOS_DEBUG, "Aux Transaction fail!\n");
 	}
 
 	return retval;
@@ -284,7 +290,7 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
 		if (retval == 0)
 			break;
 		else
-			debug("Aux Transaction fail!\n");
+			printk(BIOS_DEBUG, "Aux Transaction fail!\n");
 	}
 
 	/* Read data buffer */
@@ -359,7 +365,7 @@ int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp)
 	reg = readl(&base->sys_ctl_2);
 
 	if (reg & CHA_STA) {
-		debug("Input stream clk is changing\n");
+		printk(BIOS_DEBUG, "Input stream clk is changing\n");
 		return -1;
 	}
 
@@ -433,7 +439,7 @@ int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp)
 	} while (get_timer(start) <= STREAM_ON_TIMEOUT);
 
 	if (i != 4) {
-		debug("s5p_dp_is_video_stream_on timeout\n");
+		printk(BIOS_DEBUG, "s5p_dp_is_video_stream_on timeout\n");
 		return -1;
 	}
 
diff --git a/src/mainboard/google/snow/Kconfig b/src/mainboard/google/snow/Kconfig
index 85b90a5a3a..f0700560af 100644
--- a/src/mainboard/google/snow/Kconfig
+++ b/src/mainboard/google/snow/Kconfig
@@ -31,6 +31,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 #	select MMCONF_SUPPORT
 	select EXYNOS_DISPLAYPORT
 	select CHROMEOS
+	select DRIVER_TI_TPS65090
 
 config MAINBOARD_DIR
 	string
diff --git a/src/mainboard/google/snow/ramstage.c b/src/mainboard/google/snow/ramstage.c
index 908162914f..ad0266b621 100644
--- a/src/mainboard/google/snow/ramstage.c
+++ b/src/mainboard/google/snow/ramstage.c
@@ -18,13 +18,22 @@
  */
 
 #include <console/console.h>
+#include <device/device.h>
+#include <device/i2c.h>
+#include <drivers/ti/tps65090/tps65090.h>
 #include <cbmem.h>
+#include <delay.h>
+#include <arch/cache.h>
 #include <arch/exception.h>
+#include <arch/gpio.h>
 #include <cpu/samsung/exynos5250/clk.h>
 #include <cpu/samsung/exynos5250/cpu.h>
+#include <cpu/samsung/exynos5250/gpio.h>
 #include <cpu/samsung/exynos5250/power.h>
 
-#include <arch/cache.h>
+#include <cpu/samsung/exynos5-common/i2c.h>
+#include <cpu/samsung/exynos5-common/s5p-dp-core.h>
+
 
 /* convenient shorthand (in MB) */
 #define DRAM_START	(CONFIG_SYS_SDRAM_BASE >> 20)
@@ -35,7 +44,8 @@ void hardwaremain(int boot_complete);
 void main(void)
 {
 	console_init();
-	printk(BIOS_INFO, "hello from ramstage; now with deluxe exception handling.\n");
+	printk(BIOS_INFO,
+	       "hello from ramstage; now with deluxe exception handling.\n");
 
 	/* set up coreboot tables */
 	high_tables_size = CONFIG_COREBOOT_TABLES_SIZE;
@@ -54,7 +64,8 @@ void main(void)
 	dcache_invalidate_all();
 	dcache_mmu_enable();
 
-	/* this is going to move, but we must have it now and we're not sure where */
+	/* this is going to move, but we must have it now and we're
+	 * not sure where */
 	exception_init();
 
 	const unsigned epll_hz = 192000000;
@@ -68,3 +79,173 @@ void main(void)
 
 	hardwaremain(0);
 }
+
+/* TODO: transplanted DP stuff, clean up once we have something that works */
+static enum exynos5_gpio_pin dp_pd_l = GPIO_Y25;	/* active low */
+static enum exynos5_gpio_pin dp_rst_l = GPIO_X15;	/* active low */
+static enum exynos5_gpio_pin dp_hpd = GPIO_X07;		/* active high */
+
+static void exynos_dp_bridge_setup(void)
+{
+	exynos_pinmux_config(PERIPH_ID_DPHPD, 0);
+
+	gpio_set_value(dp_pd_l, 1);
+	gpio_cfg_pin(dp_pd_l, EXYNOS_GPIO_OUTPUT);
+	gpio_set_pull(dp_pd_l, EXYNOS_GPIO_PULL_NONE);
+
+	gpio_set_value(dp_rst_l, 0);
+	gpio_cfg_pin(dp_rst_l, EXYNOS_GPIO_OUTPUT);
+	gpio_set_pull(dp_rst_l, EXYNOS_GPIO_PULL_NONE);
+	udelay(10);
+	gpio_set_value(dp_rst_l, 1);
+
+	udelay(90000);	/* FIXME: this might be unnecessary */
+}
+
+static void exynos_dp_bridge_init(void)
+{
+	/* De-assert PD (and possibly RST) to power up the bridge */
+	gpio_set_value(dp_pd_l, 1);
+	gpio_set_value(dp_rst_l, 1);
+
+	/*
+	 * We need to wait for 90ms after bringing up the bridge since
+	 * there is a phantom "high" on the HPD chip during its
+	 * bootup.  The phantom high comes within 7ms of de-asserting
+	 * PD and persists for at least 15ms.  The real high comes
+	 * roughly 50ms after PD is de-asserted. The phantom high
+	 * makes it hard for us to know when the NXP chip is up.
+	 */
+	udelay(90000);	/* FIXME: this might be unnecessary */
+}
+
+static int exynos_dp_hotplug(void)
+{
+	int x = gpio_get_value(dp_hpd);
+	/* Check HPD.  If it's high, we're all good. */
+//	if (gpio_get_value(dp_hpd))
+//		return 0;
+	printk(BIOS_DEBUG, "%s: dp_hpd: 0x%02x\n", __func__, x);
+	if (x)
+		return 0;
+	return -1;
+}
+
+static void exynos_dp_reset(void)
+{
+	gpio_set_value(dp_pd_l, 0);
+	gpio_set_value(dp_rst_l, 0);
+	/* paranoid delay period (300ms) */
+	udelay(300 * 1000);
+}
+
+#define LCD_T5_DELAY_MS	10
+#define LCD_T6_DELAY_MS	10
+
+static void snow_backlight_pwm(void)
+{
+	/*Configure backlight PWM as a simple output high (100% brightness) */
+	gpio_direction_output(GPIO_B20, 1);
+	udelay(LCD_T6_DELAY_MS * 1000);
+}
+
+static void snow_backlight_en(void)
+{
+	/* * Configure GPIO for LCD_BL_EN */
+	gpio_direction_output(GPIO_X30, 1);
+}
+
+#define TPS69050_BUS	4	/* Snow-specific */
+
+#define FET1_CTRL	0x0f
+#define FET6_CTRL	0x14
+
+static void snow_lcd_vdd(void)
+{
+	/* Enable FET6, lcd panel */
+	tps65090_fet_enable(TPS69050_BUS, FET6_CTRL);
+}
+
+static void snow_backlight_vdd(void)
+{
+	/* Enable FET1, backlight */
+	tps65090_fet_enable(TPS69050_BUS, FET1_CTRL);
+	udelay(LCD_T5_DELAY_MS * 1000);
+}
+
+//static struct video_info smdk5250_dp_config = {
+static struct video_info snow_dp_video_info = {
+	/* FIXME: fix video_info struct to use const for name */
+	.name			= (char *)"eDP-LVDS NXP PTN3460",
+
+	.h_sync_polarity	= 0,
+	.v_sync_polarity	= 0,
+	.interlaced		= 0,
+
+	.color_space		= COLOR_RGB,
+	.dynamic_range		= VESA,
+	.ycbcr_coeff		= COLOR_YCBCR601,
+	.color_depth		= COLOR_8,
+
+	.link_rate		= LINK_RATE_2_70GBPS,
+	.lane_count		= LANE_COUNT2,
+};
+
+/* FIXME: move some place more appropriate */
+#define EXYNOS5250_DP1_BASE	0x145b0000
+#define SNOW_MAX_DP_TRIES	5
+
+/* this happens after cpu_init where exynos resources are set */
+static void mainboard_init(device_t dev)
+{
+	int dp_tries;
+	unsigned int wait_ms;
+	struct s5p_dp_device dp_device = {
+		.base = (struct exynos5_dp *)EXYNOS5250_DP1_BASE,
+		.video_info = &snow_dp_video_info,
+	};
+
+	i2c_init(TPS69050_BUS, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(7, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+	snow_lcd_vdd();
+	do {
+		udelay(50);
+	} while (!exynos_dp_hotplug());
+
+	exynos_dp_bridge_setup();
+	for (dp_tries = 1; dp_tries <= SNOW_MAX_DP_TRIES; dp_tries++) {
+		if (wait_ms) {
+			udelay(wait_ms);
+			wait_ms = 0;
+		}
+
+		exynos_dp_bridge_init();
+		if (exynos_dp_hotplug()) {
+			exynos_dp_reset();
+			continue;
+		}
+
+		if (dp_controller_init(&dp_device, &wait_ms))
+			continue;
+
+		snow_backlight_vdd();
+		snow_backlight_pwm();
+		snow_backlight_en();
+		/* if we're here, we're successful */
+		break;
+	}
+
+	if (dp_tries > SNOW_MAX_DP_TRIES)
+		printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__);
+}
+
+static void mainboard_enable(device_t dev)
+{
+	dev->ops->init = &mainboard_init;
+}
+
+struct chip_operations mainboard_ops = {
+	.name	= "Samsung/Google ARM Chromebook",
+	.enable_dev = mainboard_enable,
+};